kernel/linux.git/include/linux/pci.h, branch v4.14.223

PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum

2019-05-25T16:25:32+00:00

commit 4ec73791a64bab25cabf16a6067ee478692e506d upstream. Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode (conventional PCI on primary side, PCIe on downstream side), the Retrain Link bit needs to be cleared manually to allow the link training to complete successfully. If it is not cleared manually, the link training is continuously restarted and no devices below the PCI-to-PCIe bridge can be accessed. That means drivers for devices below the bridge will be loaded but won't work and may even crash because the driver is only reading 0xffff. See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL, PI7C9X130. Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected devices set this bit. Note that pcie_retrain_link() lives in aspm.c because that's currently the only place we use it, but this erratum is not specific to ASPM, and we may retrain links for other reasons in the future. Signed-off-by: Stefan Mätje [bhelgaas: apply regardless of CONFIG_PCIEASPM] Signed-off-by: Bjorn Helgaas Reviewed-by: Andy Shevchenko CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: Add wrappers for dev_printk()

2018-09-09T17:55:54+00:00

commit 7506dc7989933235e6fc23f3d0516bdbf0f7d1a8 upstream. Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas [only take the pci.h portion of this patch, to make backporting stuff easier over time - gregkh] Signed-off-by: Greg Kroah-Hartman

PCI: OF: Fix I/O space page leak

2018-08-24T11:09:19+00:00

commit a5fb9fb023a1435f2b42bccd7f547560f3a21dc3 upstream. When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: split commit/updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build

2018-04-26T09:02:08+00:00

[ Upstream commit 80db6f08b7af93eddc9487535e6150b220262637 ] Some hardware can operate in either "host" or "endpoint" mode, which means there can be both a host bridge driver and an endpoint driver for the same device. Those drivers share a lot of code, so sometimes they live in the same source file. The host bridge driver requires CONFIG_PCI=y because it enumerates PCI devices below the bridge using the PCI core. The endpoint driver does not require CONFIG_PCI=y because it runs in an embedded kernel on the other side of the device, e.g., on an adapter card. pci-dra7xx.c contains both host and endpoint drivers. If we select only the endpoint driver (CONFIG_PCI=n and CONFIG_PCI_DRA7XX_EP=y), the unneeded host driver is still compiled. It references pci_irqd_intx_xlate(), which is not present when CONFIG_PCI=n, which causes this error: drivers/pci/dwc/pci-dra7xx.c:229:11: error: 'pci_irqd_intx_xlate' undeclared here (not in a function) Add a dummy pci_irqd_intx_xlate() for the CONFIG_PCI=n case. [bhelgaas: changelog] Signed-off-by: Niklas Cassel Signed-off-by: Bjorn Helgaas Acked-by: Arnd Bergmann Acked-by: Lorenzo Pieralisi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

PCI: Add dummy pci_acs_enabled() for CONFIG_PCI=n build

2017-09-25T16:08:20+00:00

If CONFIG_PCI=n and gcc (e.g. 4.1.2) decides not to inline get_pci_function_alias_group(), the build fails with: drivers/iommu/iommu.o: In function `get_pci_function_alias_group': iommu.c:(.text+0xfdc): undefined reference to `pci_acs_enabled' Due to the various dummies for PCI calls in the CONFIG_PCI=n case, pci_acs_enabled() never called, but not all versions of gcc are smart enough to realize that. While explicitly marking get_pci_function_alias_group() inline would fix the build, this would inflate the code for the CONFIG_PCI=y case, as get_pci_function_alias_group() is a not-so-small function called from two places. Hence fix the issue by introducing a dummy for pci_acs_enabled() instead. Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu") Signed-off-by: Geert Uytterhoeven Signed-off-by: Bjorn Helgaas Reviewed-by: Alex Williamson

Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-09-08T22:47:43+00:00

Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...

Merge branch 'pci/trivial' into next

2017-09-07T18:24:20+00:00

* pci/trivial: PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()

Merge branch 'pci/irq-fixups' into next

2017-09-07T18:24:16+00:00

* pci/irq-fixups: PCI: Inline and remove pcibios_update_irq() PCI: Remove unused pci_fixup_irqs() function sparc/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks unicore32/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks tile/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks m68k/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks sh/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks sh/PCI: Remove __init optimisations from IRQ mapping functions/data MIPS: PCI: Fix pcibios_scan_bus() NULL check code path

Merge branch 'pci/enumeration' into next

2017-09-07T18:24:14+00:00

* pci/enumeration: PCI: Warn periodically while waiting for non-CRS ("device ready") status PCI: Wait up to 60 seconds for device to become ready after FLR PCI: Factor out pci_bus_wait_crs() PCI: Add pci_bus_crs_vendor_id() to detect CRS response data PCI: Always check for non-CRS response before timeout PCI: Avoid race while enabling upstream bridges PCI: Mark Broadcom HT2100 Root Port Extended Tags as broken