kernel/linux.git/include/linux/of_irq.h, branch v6.18.21

of/irq: Convert of_msi_map_id() callers to of_msi_xlate()

2025-09-03T14:01:26+00:00

With the introduction of the of_msi_xlate() function, the OF layer provides an API to map a device ID and retrieve the MSI controller node the ID is mapped to with a single call. of_msi_map_id() is currently used to map a deviceID to a specific MSI controller node; of_msi_xlate() can be used for that purpose too, there is no need to keep the two functions. Convert of_msi_map_id() to of_msi_xlate() calls and update the of_msi_xlate() documentation to describe how the struct device_node pointer passed in should be set-up to either provide the MSI controller node target or receive its pointer upon mapping completion. Signed-off-by: Lorenzo Pieralisi Cc: Thomas Gleixner Cc: Rob Herring Cc: Marc Zyngier Acked-by: Thomas Gleixner Reviewed-by: Frank Li Link: https://lore.kernel.org/r/20250805133443.936955-1-lpieralisi@kernel.org Signed-off-by: Rob Herring (Arm)

of/irq: Add of_msi_xlate() helper function

2025-07-08T17:35:52+00:00

Add an of_msi_xlate() helper that maps a device ID and returns the device node of the MSI controller the device ID is mapped to. Required by core functions that need an MSI controller device node pointer at the same time as a mapped device ID, of_msi_map_id() is not sufficient for that purpose. Signed-off-by: Lorenzo Pieralisi Reviewed-by: Marc Zyngier Cc: Rob Herring Cc: Marc Zyngier Reviewed-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-24-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier

of: Constify struct device_node function arguments

2024-10-15T13:58:36+00:00

Functions which don't change the refcount or otherwise modify struct device_node can make struct device_node const. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241010-dt-const-v1-3-87a51f558425@kernel.org Signed-off-by: Rob Herring (Arm)

irqchip: Make irqchip_init() usable on pure ACPI systems

2022-09-28T13:11:28+00:00

Pure ACPI systems (e.g., LoongArch) do not need OF_IRQ, but still require irqchip_init() to perform the ACPI irqchip probing, even when OF_IRQ isn't selected. Relax the dependency to enable the generic irqchip support when ACPI_GENERIC_GSI is configured. Signed-off-by: Huacai Chen Tested-by: Tiezhu Yang [maz: revamped commit message] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20220927124557.3246737-1-chenhuacai@loongson.cn

powerpc/powermac: constify device_node in of_irq_parse_oldworld()

2022-05-22T05:59:54+00:00

The of_irq_parse_oldworld() does not modify passed device_node so make it a pointer to const for safety. Drop the extern while modifying the line. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210924105653.46963-2-krzysztof.kozlowski@canonical.com

of: irq: Fix the return value for of_irq_parse_one() stub

2021-02-11T07:33:41+00:00

When commit 1852ebd13542 ("of: irq: make a stub for of_irq_parse_one()") added a stub for of_irq_parse_one() it set the return value to 0. Return value of 0 in this instance means the call succeeded and the out_irq pointer was filled with valid data. So, fix it to return an error value. Fixes: 1852ebd13542 ("of: irq: make a stub for of_irq_parse_one()") Acked-by: Stephen Rothwell Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210210200050.4106032-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman

of: irq: make a stub for of_irq_parse_one()

2021-02-10T18:18:09+00:00

Signed-off-by: Stephen Rothwell Link: https://lore.kernel.org/r/20210210214720.02e6a6be@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman

of/irq: Make of_msi_map_rid() PCI bus agnostic

2020-07-28T14:51:32+00:00

There is nothing PCI bus specific in the of_msi_map_rid() implementation other than the requester ID tag for the input ID space. Rename requester ID to a more generic ID so that the translation code can be used by all busses that require input/output ID translations. No functional change intended. Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring Cc: Bjorn Helgaas Cc: Rob Herring Cc: Marc Zyngier Link: https://lore.kernel.org/r/20200619082013.13661-11-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas

of/irq: make of_msi_map_get_device_domain() bus agnostic

2020-07-28T14:51:32+00:00

of_msi_map_get_device_domain() is PCI specific but it need not be and can be easily changed to be bus agnostic in order to be used by other busses by adding an IRQ domain bus token as an input parameter. Signed-off-by: Diana Craciun Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring Acked-by: Bjorn Helgaas # pci/msi.c Cc: Bjorn Helgaas Cc: Rob Herring Cc: Marc Zyngier Link: https://lore.kernel.org/r/20200619082013.13661-10-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman