kernel/linux.git/include/linux/mtd/rawnand.h, branch v5.4.26

Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2019-07-13T22:42:44+00:00

Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...

mtd: rawnand: export NAND operation tracer

2019-06-27T18:05:25+00:00

The NAND core has a NAND operation tracing function, but it can only be used by drivers using the generic option parser from the NAND core. Export the tracing function as a static inline function in rawnand.h so that drivers implementing exec_op directly do not have to write their own operation tracing. Signed-off-by: Sascha Hauer Reviewed-by: Miquel Raynal Signed-off-by: Miquel Raynal

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

mtd: nand: Make flags for bad block marker position more granular

2019-04-18T06:54:07+00:00

To be able to check and set bad block markers in the first and second page of a block independently of each other, we create separate flags for both cases. Previously NAND_BBM_SECONDPAGE meant, that both, the first and the second page were used. With this patch NAND_BBM_FIRSTPAGE stands for using the first page and NAND_BBM_SECONDPAGE for using the second page. This patch is only for preparation of subsequent changes and does not implement the logic to actually handle both flags separately. Signed-off-by: Frieder Schrempf Reviewed-by: Boris Brezillon Reviewed-by: Miquel Raynal Signed-off-by: Miquel Raynal

mtd: rawnand: Always store info about bad block markers in chip struct

2019-04-18T06:54:07+00:00

The information about where the manufacturer puts the bad block markers inside the bad block and in the OOB data is stored in different places. Let's move this information to nand_chip.options and nand_chip.badblockpos. As this chip-specific information is not directly related to the bad block table (BBT), we also rename the flags to NAND_BBM_*. Signed-off-by: Frieder Schrempf Reviewed-by: Miquel Raynal Signed-off-by: Miquel Raynal

mtd: rawnand: constify elements of NAND_OP_PARSER(_PATTERN)

2019-04-18T06:54:06+00:00

Currently, drivers are able to constify a nand_op_parser array, but not nand_op_parser_pattern and nand_op_parser_pattern_elem since they are instantiated by using the NAND_OP_PARSER(_PATTERN). Add 'const' to them in order to move more driver data from .data to .rodata section. Signed-off-by: Masahiro Yamada Reviewed-by: Boris Brezillon Signed-off-by: Miquel Raynal

mtd: rawnand: Fix sphinx syntax

2019-04-18T06:54:01+00:00

Sphinx doesn't handle expressions in identifier references. This fixes the following warnings: ./include/linux/mtd/rawnand.h:1184: WARNING: Inline strong start-string without end-string. ./include/linux/mtd/rawnand.h:1186: WARNING: Inline strong start-string without end-string. Signed-off-by: Jonathan Neuschäfer Signed-off-by: Miquel Raynal

mtd: rawnand: Get rid of chip->ecc_{strength,step}_ds

2019-04-08T08:21:16+00:00

nand_device embeds a nand_ecc_req object which contains the minimum strength and step-size required by the NAND device. Drop the chip->ecc_{strength,step}_ds fields and use chip->base.eccreq.{strength,step_size} instead. Signed-off-by: Boris Brezillon Signed-off-by: Miquel Raynal Reviewed-by: Frieder Schrempf

mtd: rawnand: Get rid of chip->numchips

2019-04-08T08:21:16+00:00

The same information is provided by nanddev_ntargets(). Signed-off-by: Boris Brezillon Signed-off-by: Miquel Raynal Reviewed-by: Frieder Schrempf

mtd: rawnand: Get rid of chip->chipsize

2019-04-08T08:21:15+00:00

The target size can now be returned by nanddev_get_targetsize(). Get rid of the chip->chipsize field and use this helper instead. Signed-off-by: Boris Brezillon Reviewed-by: Frieder Schrempf Signed-off-by: Miquel Raynal