kernel/linux.git/include/linux/msi.h, branch v6.10.7

Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-05-21T17:09:28+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...

Revert "genirq/msi: Provide constants for PCI/IMS support"

2024-05-15T22:02:08+00:00

This reverts commit e23d4192bf9b612bce5b24f22719fd3cc6edaa69. IMS (Interrupt Message Store) support appeared in v6.2, but there are no users yet. Remove it for now. We can add it back when a user comes along. Link: https://lore.kernel.org/r/20240410221307.2162676-8-helgaas@kernel.org Signed-off-by: Bjorn Helgaas Reviewed-by: Kevin Tian Reviewed-by: Thomas Gleixner

genirq/msi: Add MSI allocation helper and export MSI functions

2024-04-23T20:27:52+00:00

MSI functions for allocation and free can be directly used by the device drivers without any wrapper provided by bus drivers. So export these MSI functions. Also, add a wrapper API to allocate MSIs providing only the number of interrupts rather than range for simpler driver usage. Signed-off-by: Nipun Gupta Reviewed-by: Thomas Gleixner Link: https://lore.kernel.org/r/20240423111021.1686144-1-nipun.gupta@amd.com Signed-off-by: Alex Williamson

genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV

2024-02-15T16:55:41+00:00

Some platform-MSI implementations require that power management is redirected to the underlying interrupt chip device. To make this work with per device MSI domains provide a new feature flag and let the core code handle the setup of dev->pm_dev when set during device MSI domain creation. Signed-off-by: Thomas Gleixner Signed-off-by: Anup Patel Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20240127161753.114685-14-apatel@ventanamicro.com

genirq/msi: Optionally use dev->fwnode for device domain

2024-02-15T16:55:41+00:00

To support wire to MSI domains via the MSI infrastructure it is required to use the firmware node of the device which implements this for creating the MSI domain. Otherwise the existing firmware match mechanisms to find the correct irqdomain for a wired interrupt which is connected to a wire to MSI bridge would fail. This cannot be used for the general case because not all devices provide firmware nodes and all regular per device MSI domains are directly associated to the device and have not be searched for. Signed-off-by: Thomas Gleixner Signed-off-by: Anup Patel Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20240127161753.114685-11-apatel@ventanamicro.com

genirq/msi: Provide optional translation op

2024-02-15T16:55:40+00:00

irq_create_fwspec_mapping() requires translation of the firmware spec to a hardware interrupt number and the trigger type information. Wired interrupts which are connected to a wire to MSI bridge, like MBIGEN are allocated that way. So far MBIGEN provides a regular irqdomain which then hooks backwards into the MSI infrastructure. That's an unholy mess and will be replaced with per device MSI domains which are regular MSI domains. Interrupts on MSI domains are not supported by irq_create_fwspec_mapping(), but for making the wire to MSI bridges sane it makes sense to provide a special allocation/free interface in the MSI infrastructure. That avoids the backdoors into the core MSI allocation code and just shares all the regular MSI infrastructure. Provide an optional translation callback in msi_domain_ops which can be utilized by these wire to MSI bridges. No other MSI domain should provide a translation callback. The default translation callback of the MSI irqdomains will warn when it is invoked on a non-prepared MSI domain. Signed-off-by: Thomas Gleixner Signed-off-by: Anup Patel Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20240127161753.114685-8-apatel@ventanamicro.com

platform-msi: Remove unused interfaces

2024-02-15T16:55:40+00:00

Signed-off-by: Thomas Gleixner

platform-msi: Prepare for real per device domains

2024-02-15T16:55:40+00:00

Provide functions to create and remove per device MSI domains which replace the platform-MSI domains. The new model is that each of the devices which utilize platform-MSI gets now its private MSI domain which is "customized" in size and with a device specific function to write the MSI message into the device. This is the same functionality as platform-MSI but it avoids all the down sides of platform MSI, i.e. the extra ID book keeping, the special data structure in the msi descriptor. Further the domains are only created when the devices are really in use, so the burden is on the usage and not on the infrastructure. Fill in the domain template and provide two functions to init/allocate and remove a per device MSI domain. Until all users and parent domain providers are converted, the init/alloc function invokes the original platform-MSI code when the irqdomain which is associated to the device does not provide MSI parent functionality yet. Signed-off-by: Thomas Gleixner Signed-off-by: Anup Patel Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20240127161753.114685-6-apatel@ventanamicro.com

genirq/msi: Extend msi_parent_ops

2024-02-15T16:55:40+00:00

Supporting per device MSI domains on ARM64, RISC-V and the zoo of interrupt mechanisms needs a bit more information than what the initial x86 implementation provides. Add the following fields: - required_flags: The flags which a parent domain requires to be set - bus_select_token: The bus token of the parent domain for select() - bus_select_mask: A bitmask of supported child domain bus types This allows to provide library functions which can be shared between various interrupt chip implementations and avoids replicating mostly similar code all over the place. Signed-off-by: Thomas Gleixner Signed-off-by: Anup Patel Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20240127161753.114685-4-apatel@ventanamicro.com

x86/apic/msi: Fix misconfigured non-maskable MSI quirk

2023-10-26T11:53:06+00:00

commit ef8dd01538ea ("genirq/msi: Make interrupt allocation less convoluted"), reworked the code so that the x86 specific quirk for affinity setting of non-maskable PCI/MSI interrupts is not longer activated if necessary. This could be solved by restoring the original logic in the core MSI code, but after a deeper analysis it turned out that the quirk flag is not required at all. The quirk is only required when the PCI/MSI device cannot mask the MSI interrupts, which in turn also prevents reservation mode from being enabled for the affected interrupt. This allows ot remove the NOMASK quirk bit completely as msi_set_affinity() can instead check whether reservation mode is enabled for the interrupt, which gives exactly the same answer. Even in the momentary non-existing case that the reservation mode would be not set for a maskable MSI interrupt this would not cause any harm as it just would cause msi_set_affinity() to go needlessly through the functionaly equivalent slow path, which works perfectly fine with maskable interrupts as well. Rework msi_set_affinity() to query the reservation mode and remove all NOMASK quirk logic from the core code. [ tglx: Massaged changelog ] Fixes: ef8dd01538ea ("genirq/msi: Make interrupt allocation less convoluted") Suggested-by: Thomas Gleixner Signed-off-by: Koichiro Den Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231026032036.2462428-1-den@valinux.co.jp