kernel/linux.git/include/linux/mmc/sdio_ids.h, branch v7.1

Merge tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2026-04-15T21:15:25+00:00

Pull MMC updates from Ulf Hansson: "MMC core: - Add NXP vendor and IW61x device IDs for WiFi chips over SDIO - Add quirk for incorrect manufacturing date - Add support for manufacturing date beyond 2025 - Optimize support for secure erase/trim for some Kingston eMMCs - Remove support for the legacy "enable-sdio-wakeup" DT property - Use single block writes in the retry path MMC host: - dw_mmc: - A great amount of cleanups/simplifications to improve the code - Add clk_phase_map support - Remove mshc DT alias support - dw_mmc-rockchip: - Fix runtime PM support for internal phase - Add support for the RV1103B variant - loongson2: - Add support for the Loongson-2K0300 SD/SDIO/eMMC controller - mtk-sd: - Add support for the MT8189 variant - renesas_sdhi_core: - Add support for selecting an optional mux - rtsx_pci_sdmmc: - Simplify voltage switch handling - sdhci: - Stop advertising the driver in dmesg - sdhci-esdhc-imx: - Add 1-bit bus width support - Add support for the NXP S32N79 variant - sdhci-msm: - Add support for the IPQ5210 and IPQ9650 variants - Add support for wrapped keys - Enable ICE for CQE-capable controllers with non-CQE cards - sdhci-of-arasan: - Add support for the Axiado AX3000 variant - sdhci-of-aspeed: - Add support for the AST2700 variant - sdhci-of-bst: - Add driver for the Black Sesame Technologies C1200 controller - sdhci-of-dwcmshc: - Add support for the Canaan K230 variant - Add support for the HPE GSC variant - Prevent clock glitches to avoid malfunction - sdhci-of-k1: - Add support for the K3 variant mux core/consumers: - core: - Add helper functions for getting optional and selected mux-state - i2c-omap: - Convert to devm_mux_state_get_optional_selected() - phy-renesas: - Convert to devm_mux_state_get_optional_selected() - phy-can-transceiver: - Convert to devm_mux_state_get_optional()" * tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (131 commits) mmc: sdhci-msm: Fix the wrapped key handling mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration mmc: core: Simplify with scoped for each OF child loop mmc: core: Optimize size of struct mmc_queue_req mmc: vub300: clean up module init mmc: vub300: rename probe error labels mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request() mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery mmc: mmc_test: Replace hard-coded values with macros and consolidate test parameters mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS() mmc: core: Replace the hard-coded shift value 9 with SECTOR_SHIFT mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions mmc: core: Switch to use pm_ptr() for mmc_host_class_dev_pm_ops mmc: core: Remove legacy 'enable-sdio-wakeup' DT property support mmc: mmc_test: use kzalloc_flex mmc: mtk-sd: disable new_tx/rx and modify related settings for mt8189 dt-bindings: mmc: hisilicon,hi3660-dw-mshc: Convert to DT schema dt-bindings: mmc: sdhci-msm: add IPQ9650 compatible mmc: block: use single block write in retry ...

mmc: sdio: add MediaTek MT7902 SDIO device ID

2026-04-10T14:24:21+00:00

Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h. Acked-by: Ulf Hansson Signed-off-by: Sean Wang Signed-off-by: Luiz Augusto von Dentz

mmc: sdio: add NXP vendor and IW61x device IDs

2026-02-23T11:06:54+00:00

Add NXP's SDIO vendor ID (0x0471) and IW61x device ID (0x0205) to sdio_ids.h for future support of NXP Wi-Fi chips over SDIO. Signed-off-by: Jeff Chen Signed-off-by: Ulf Hansson

wifi: brcmfmac: fix 43752 SDIO FWVID incorrectly labelled as Cypress (CYW)

2025-09-03T08:08:04+00:00

Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so has not officially released any firmware binary for it. It is incorrect to maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the chip's firmware Vendor ID as "WCC" as suggested by the maintainer. Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization") Fixes: f74f1ec22dc2 ("wifi: brcmfmac: add support for Cypress firmware api") Signed-off-by: Gokul Sivakumar Acked-by: Arend van Spriel Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg

wifi: brcmfmac: Add support for the SDIO 43751 device

2025-07-18T12:14:24+00:00

Add the SDIO ID and firmware matching for the 43751 device. Based on the previous work from Marc Gonzalez . Tested on an i.MX6DL board connected to an AP6398SV chip with the brcmfmac43752-sdio.bin firmware taken from: https://source.puri.sm/Librem5/firmware-brcm43752-nonfree Signed-off-by: Fabio Estevam Acked-by: Arend van Spriel > Link: https://patch.msgid.link/20250712215307.1310802-1-festevam@gmail.com Signed-off-by: Johannes Berg

wifi: rtw88: SDIO device driver for RTL8723CS

2024-03-14T08:59:30+00:00

This driver uses the new rtw8703b chip driver code. Acked-by: Ping-Ke Shih Acked-by: Ulf Hansson # For SDIO Tested-by: Pavel Machek Signed-off-by: Fiona Klute Signed-off-by: Kalle Valo Link: https://msgid.link/20240311103735.615541-10-fiona.klute@gmx.de

mmc: sdio: Add/rename SDIO ID of the RTL8723DS SDIO wifi cards

2023-05-25T16:09:39+00:00

RTL8723DS comes in two variant and each of them has their own SDIO ID: - 0xd723 can connect two antennas. The WiFi part is still 1x1 so the second antenna can be dedicated to Bluetooth - 0xd724 can only connect one antenna so it's shared between WiFi and Bluetooth Add a new entry for the single antenna RTL8723DS (0xd724) which can be found on the MangoPi MQ-Quad. Also rename the existing RTL8723DS entry (0xd723) so it's name reflects that it's the variant with support for two antennas. Reviewed-by: Ping-Ke Shih Signed-off-by: Martin Blumenstingl Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230522202425.1827005-4-martin.blumenstingl@googlemail.com

wifi: brcmfmac: add Cypress 43439 SDIO ids

2023-04-14T12:30:49+00:00

Add SDIO ids for use with the muRata 1YN (Cypress CYW43439). The odd thing about this is that the previous 1YN populated on M.2 card for evaluation purposes had BRCM SDIO vendor ID, while the chip populated on real hardware has a Cypress one. The device ID also differs between the two devices. But they are both 43439 otherwise, so add the IDs for both. On-device 1YN (43439), the new one, chip label reads "1YN": ``` /sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device 0x04b4 0xbd3d ``` EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4": ``` /sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device 0x02d0 0xa9a6 ``` Reviewed-by: Hans de Goede Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut Reviewed-by: Simon Horman Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230407203752.128539-1-marex@denx.de

mmc: sdio: add Realtek SDIO vendor ID and various wifi device IDs

2023-04-12T12:51:09+00:00

Add the SDIO vendor ID for Realtek and some device IDs extracted from their GPL vendor driver. This will be useful in the future when the rtw88 driver gains support for these chips. Acked-by: Ulf Hansson Reviewed-by: Ping-Ke Shih Reviewed-by: Pali Rohár Signed-off-by: Martin Blumenstingl Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230405200729.632435-7-martin.blumenstingl@googlemail.com

wifi: mwifiex: Support SD8978 chipset

2023-02-13T16:51:35+00:00

The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987, so reuse the existing mwifiex_reg_sd8987 definition. Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise identical, save for the fw_dump_ctrl register: They define it as 0xf0 whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that 0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses 0xf9 for all of them, so there's a chance that 0xf0 is not correct in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot test that for lack of hardware, hence am leaving it as is. NXP has only released a firmware which runs Bluetooth over UART. Perhaps Bluetooth over SDIO is unsupported by this chipset. Consequently, only an "sdiouart" firmware image is referenced, not an alternative "sdsd" image. Signed-off-by: Lukas Wunner Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de