kernel/linux.git/include/linux/mmc/sdio_ids.h, branch v6.6.131

mmc: sdio: Add/rename SDIO ID of the RTL8723DS SDIO wifi cards

2023-05-25T16:09:39+00:00

RTL8723DS comes in two variant and each of them has their own SDIO ID: - 0xd723 can connect two antennas. The WiFi part is still 1x1 so the second antenna can be dedicated to Bluetooth - 0xd724 can only connect one antenna so it's shared between WiFi and Bluetooth Add a new entry for the single antenna RTL8723DS (0xd724) which can be found on the MangoPi MQ-Quad. Also rename the existing RTL8723DS entry (0xd723) so it's name reflects that it's the variant with support for two antennas. Reviewed-by: Ping-Ke Shih Signed-off-by: Martin Blumenstingl Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230522202425.1827005-4-martin.blumenstingl@googlemail.com

wifi: brcmfmac: add Cypress 43439 SDIO ids

2023-04-14T12:30:49+00:00

Add SDIO ids for use with the muRata 1YN (Cypress CYW43439). The odd thing about this is that the previous 1YN populated on M.2 card for evaluation purposes had BRCM SDIO vendor ID, while the chip populated on real hardware has a Cypress one. The device ID also differs between the two devices. But they are both 43439 otherwise, so add the IDs for both. On-device 1YN (43439), the new one, chip label reads "1YN": ``` /sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device 0x04b4 0xbd3d ``` EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4": ``` /sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device 0x02d0 0xa9a6 ``` Reviewed-by: Hans de Goede Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut Reviewed-by: Simon Horman Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230407203752.128539-1-marex@denx.de

mmc: sdio: add Realtek SDIO vendor ID and various wifi device IDs

2023-04-12T12:51:09+00:00

Add the SDIO vendor ID for Realtek and some device IDs extracted from their GPL vendor driver. This will be useful in the future when the rtw88 driver gains support for these chips. Acked-by: Ulf Hansson Reviewed-by: Ping-Ke Shih Reviewed-by: Pali Rohár Signed-off-by: Martin Blumenstingl Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230405200729.632435-7-martin.blumenstingl@googlemail.com

wifi: mwifiex: Support SD8978 chipset

2023-02-13T16:51:35+00:00

The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987, so reuse the existing mwifiex_reg_sd8987 definition. Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise identical, save for the fw_dump_ctrl register: They define it as 0xf0 whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that 0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses 0xf9 for all of them, so there's a chance that 0xf0 is not correct in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot test that for lack of hardware, hence am leaving it as is. NXP has only released a firmware which runs Bluetooth over UART. Perhaps Bluetooth over SDIO is unsupported by this chipset. Consequently, only an "sdiouart" firmware image is referenced, not an alternative "sdsd" image. Signed-off-by: Lukas Wunner Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de

wifi: brcmfmac: add 43439 SDIO ids and initialization

2022-09-07T08:01:15+00:00

Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439). Add the firmware mapping structures for the CYW43439 chipset. The 43439 needs some things setup similar to the 43430 chipset. Signed-off-by: Marek Vasut Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220827024903.617294-1-marex@denx.de

mmc: add MT7921 SDIO identifiers for MediaTek Bluetooth devices

2021-10-25T13:36:24+00:00

The MT7961 SDIO identifier for MediaTek Bluetooth devices were being referred in the MediaTek Bluetooth driver. Co-developed-by: Mark-yw Chen Signed-off-by: Mark-yw Chen Signed-off-by: Sean Wang Signed-off-by: Marcel Holtmann

brcmfmac: add 43752 SDIO ids and initialization

2021-08-21T16:59:28+00:00

Add HW and SDIO ids for use with the SparkLan AP6275S Add the firmware mapping structures for the BRCM43752 chipset. The 43752 needs some things setup similar to the 43012 chipset. The WATERMARK shows better performance when initialized to the 4373 value. Signed-off-by: Angus Ainslie Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210812165218.2508258-2-angus@akkea.ca

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-08-06T03:13:21+00:00

Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...

wilc1000: Move wilc1000 SDIO ID's from driver source to common header file

2020-08-02T15:12:23+00:00

Moved macros used for Vendor/Device ID from wilc1000 driver to common header file and changed macro name for consistency with other macros. Signed-off-by: Ajay Singh Acked-by: Ulf Hansson Acked-by: Pali Rohár Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200717051134.19160-1-ajay.kathat@microchip.com

mmc: sdio: Move SDIO IDs from rsi_sdio driver to common include file

2020-07-13T10:18:24+00:00

Define appropriate macro names for consistency with other macros. Signed-off-by: Pali Rohár Link: https://lore.kernel.org/r/20200629072144.24351-1-pali@kernel.org Signed-off-by: Ulf Hansson