kernel/linux.git/include/linux/mmc/host.h, branch v5.2.20

mmc: core: Add helper function to indicate if SDIO IRQs is enabled

2019-10-05T11:13:56+00:00

[ Upstream commit bd880b00697befb73eff7220ee20bdae4fdd487b ] To avoid each host driver supporting SDIO IRQs, from keeping track internally about if SDIO IRQs has been claimed, let's introduce a common helper function, sdio_irq_claimed(). The function returns true if SDIO IRQs are claimed, via using the information about the number of claimed irqs. This is safe, even without any locks, as long as the helper function is called only from runtime/system suspend callbacks of the host driver. Tested-by: Matthias Kaehlcke Signed-off-by: Ulf Hansson Reviewed-by: Douglas Anderson Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2019-06-21T16:58:42+00:00

Pull still more SPDX updates from Greg KH: "Another round of SPDX updates for 5.2-rc6 Here is what I am guessing is going to be the last "big" SPDX update for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that were "easy" to determine by pattern matching. The ones after this are going to be a bit more difficult and the people on the spdx list will be discussing them on a case-by-case basis now. Another 5000+ files are fixed up, so our overall totals are: Files checked: 64545 Files with SPDX: 45529 Compared to the 5.1 kernel which was: Files checked: 63848 Files with SPDX: 22576 This is a huge improvement. Also, we deleted another 20000 lines of boilerplate license crud, always nice to see in a diffstat" * tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

mmc: core: API to temporarily disable retuning for SDIO CRC errors

2019-06-18T11:30:21+00:00

Normally when the MMC core sees an "-EILSEQ" error returned by a host controller then it will trigger a retuning of the card. This is generally a good idea. However, if a command is expected to sometimes cause transfer errors then these transfer errors shouldn't cause a re-tuning. This re-tuning will be a needless waste of time. One example case where a transfer is expected to cause errors is when transitioning between idle (sometimes referred to as "sleep" in Broadcom code) and active state on certain Broadcom WiFi SDIO cards. Specifically if the card was already transitioning between states when the command was sent it could cause an error on the SDIO bus. Let's add an API that the SDIO function drivers can call that will temporarily disable the auto-tuning functionality. Then we can add a call to this in the Broadcom WiFi driver and any other driver that might have similar needs. NOTE: this makes the assumption that the card is already tuned well enough that it's OK to disable the auto-retuning during one of these error-prone situations. Presumably the driver code performing the error-prone transfer knows how to recover / retry from errors. ...and after we can get back to a state where transfers are no longer error-prone then we can enable the auto-retuning again. If we truly find ourselves in a case where the card needs to be retuned sometimes to handle one of these error-prone transfers then we can always try a few transfers first without auto-retuning and then re-try with auto-retuning if the first few fail. Without this change on rk3288-veyron-minnie I periodically see this in the logs of a machine just sitting there idle: dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson Acked-by: Adrian Hunter Acked-by: Kalle Valo Signed-off-by: Ulf Hansson

mmc: core: Convert mmc_regulator_get_ocrmask() to static

2019-02-25T14:20:58+00:00

The only left user of mmc_regulator_get_ocrmask() is the mmc core itself. Therefore, let's drop the export and turn it into static. Signed-off-by: Ulf Hansson

mmc: core: Move regulator helpers to separate file

2019-02-25T14:20:58+00:00

The mmc regulator helper functions, are placed in the extensive core.c file. In a step towards trying to create a better structure of files, avoiding too many lines of code per file, let's move these helpers to a new file, regulator.c. Moreover, this within this context it makes sense to also drop the export of mmc_vddrange_to_ocrmask(), but instead let's make it internal to the mmc core. Signed-off-by: Ulf Hansson

mmc: bcm2835: Drop pointer to mmc_host from bcm2835_host

2019-02-25T07:40:58+00:00

The BCM2835 MMC host driver uses a pointer to get from the private bcm2835_host structure to the generic mmc_host structure. However the latter is always immediately preceding the former in memory, so compute its address with a subtraction (which is cheaper than a dereference) and drop the superfluous pointer. No functional change intended. Signed-off-by: Lukas Wunner Cc: Frank Pavlic Cc: Alexander Graf Reviewed-by: Alexander Graf Signed-off-by: Ulf Hansson

mmc: core: Introduce MMC_CAP_SYNC_RUNTIME_PM

2018-12-17T07:26:24+00:00

To allow mmc host drivers to inform the mmc core about rather using pm_runtime_put_sync_suspend() instead of pm_runtime_put_autosuspend(), let's introduce MMC_CAP_SYNC_RUNTIME_PM. This is especially useful for those mmc host drivers that don't benefit from using the runtime PM autosuspend feature. Typically this is those that relies on parent devices to power the card via runtime PM, like some USB host drivers for example. Signed-off-by: Ulf Hansson Tested-by: Kai-Heng Feng Tested-by: Oleksandr Natalenko

mmc: core: Add ->hs400_prepare_ddr() callback

2018-12-17T07:26:24+00:00

Some eMMC controllers need specific settings for HS400 mode before the speed mode can be switched to DDR mode, during the HS400 initialization sequence. For that reason, let's introduce a new host callback, ->hs400_prepare_ddr() and invoked it just before switching to DDR mode. Signed-off-by: Yinbo Zhu Signed-off-by: Ulf Hansson

mmc: core: add helper to see if a host is doing a retune

2018-10-08T09:40:43+00:00

Add a helper to allow host drivers checking if a retune is in progress. Signed-off-by: Niklas Söderlund Reviewed-by: Wolfram Sang Tested-by: Wolfram Sang Signed-off-by: Ulf Hansson