kernel/linux.git/include/linux/mmc/host.h, branch linux-2.6.35.y

mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume

2010-09-20T20:36:36+00:00

commit 4c2ef25fe0b847d2ae818f74758ddb0be1c27d8e upstream. If you don't use CONFIG_MMC_UNSAFE_RESUME, as soon as you attempt to suspend, the card will be removed, therefore this patch doesn't change the behavior of this option. However the removal will be done by pm notifier, which runs while userspace is still not frozen and thus can freely use del_gendisk, without the risk of deadlock which would happen otherwise. Card detect workqueue is now disabled while userspace is frozen, Therefore if you do use CONFIG_MMC_UNSAFE_RESUME, and remove the card during suspend, the removal will be detected as soon as userspace is unfrozen, again at the moment it is safe to call del_gendisk. Tested with and without CONFIG_MMC_UNSAFE_RESUME with suspend and hibernate. [akpm@linux-foundation.org: clean up function prototype] [akpm@linux-foundation.org: fix CONFIG_PM-n linkage, small cleanups] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Maxim Levitsky Cc: David Brownell Cc: Alan Stern Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Lee Jones Signed-off-by: Greg Kroah-Hartman

mmc: remove the "state" argument to mmc_suspend_host()

2010-05-27T16:12:40+00:00

Even though many mmc host drivers pass a pm_message_t argument to mmc_suspend_host() that argument isn't used the by MMC core. As host drivers are converted to dev_pm_ops they'll have to construct pm_message_t's (as they won't be passed by the PM subsystem any more) just to appease the mmc suspend interface. We might as well just delete the unused paramter. Signed-off-by: Matt Fleming Acked-by: Anton Vorontsov Acked-by: Michal Miroslaw ZZ Acked-by: Sascha Sommer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ARM: MXC: mxcmmc: work around a bug in the SDHC busy line handling

2010-04-14T07:18:07+00:00

MX3 SoCs have a silicon bug which corrupts CRC calculation of multi-block transfers when connected SDIO peripheral doesn't drive the BUSY line as required by the specs. One way to prevent this is to only allow 1-bit transfers. Another way is playing tricks with the DMA engine, but this isn't mainline yet. So for now, we live with the performance drawback of 1-bit transfers until a nicer solution is found. This patch introduces a new host controller callback 'init_card' which is for now only called from mmc_sdio_init_card(). Signed-off-by: Daniel Mack Cc: Sascha Hauer Cc: Dan Williams Cc: Volker Ernst Cc: Jiri Kosina Cc: Michał Mirosław Signed-off-by: Sascha Hauer

sdio: introduce API for special power management features

2010-03-06T19:26:36+00:00

This patch series provides the core changes needed to allow SDIO cards to remain powered and active while the host system is suspended, and let them wake up the host system when needed. This is used to implement wake-on-lan with SDIO wireless cards at the moment. Patches to add that support to the libertas driver will be posted separately. This patch: Some SDIO cards have the ability to keep on running autonomously when the host system is suspended, and wake it up when needed. This however requires that the host controller preserve power to the card, and configure itself appropriately for wake-up. There is however 4 layers of abstractions involved: the host controller driver, the MMC core code, the SDIO card management code, and the actual SDIO function driver. To make things simple and manageable, host drivers must advertise their PM capabilities with a feature bitmask, then function drivers can query and set those features from their suspend method. Then each layer in the suspend call chain is expected to act upon those bits accordingly. [akpm@linux-foundation.org: fix typo in comment] Signed-off-by: Nicolas Pitre Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

headers: remove sched.h from interrupt.h

2009-10-11T18:20:58+00:00

After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan

mmc: add mmc card sleep and awake support

2009-09-23T14:39:33+00:00

Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: add ability to save power by powering off cards

2009-09-23T14:39:33+00:00

Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: add MMC_CAP_NONREMOVABLE host capability

2009-09-23T14:39:33+00:00

eMMC's are not removable, so unsafe resume is OK always. To permit this a new host capability MMC_CAP_NONREMOVABLE has been added and suspend / resume updated accordingly. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: allow host claim / release nesting

2009-09-23T14:39:33+00:00

This change allows the MMC host to be claimed in situations where the host may or may not have already been claimed. Also 'mmc_try_claim_host()' is now exported. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: add 'enable' and 'disable' methods to mmc host

2009-09-23T14:39:33+00:00

MMC hosts that support power saving can use the 'enable' and 'disable' methods to exit and enter power saving states. An explanation of their use is provided in the comments added to include/linux/mmc/host.h. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds