kernel/linux.git/include/linux/mlx5, branch v5.18.12

net/mlx5: correct ECE offset in query qp output

2022-06-14T16:44:58+00:00

[ Upstream commit 3fc2a9e89b3508a5cc0c324f26d7b4740ba8c456 ] ECE field should be after opt_param_mask in query qp output. Fixes: 6b646a7e4af6 ("net/mlx5: Add ability to read and write ECE options") Signed-off-by: Changcheng Liu Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-03-24T20:13:26+00:00

Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...

Merge tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio

2022-03-24T19:35:59+00:00

Pull VFIO updates from Alex Williamson: - Introduce new device migration uAPI and implement device specific mlx5 vfio-pci variant driver supporting new protocol (Jason Gunthorpe, Yishai Hadas, Leon Romanovsky) - New HiSilicon acc vfio-pci variant driver, also supporting migration interface (Shameer Kolothum, Longfang Liu) - D3hot fixes for vfio-pci-core (Abhishek Sahu) - Document new vfio-pci variant driver acceptance criteria (Alex Williamson) - Fix UML build unresolved ioport_{un}map() functions (Alex Williamson) - Fix MAINTAINERS due to header movement (Lukas Bulwahn) * tag 'vfio-v5.18-rc1' of https://github.com/awilliam/linux-vfio: (31 commits) vfio-pci: Provide reviewers and acceptance criteria for variant drivers MAINTAINERS: adjust entry for header movement in hisilicon qm driver hisi_acc_vfio_pci: Use its own PCI reset_done error handler hisi_acc_vfio_pci: Add support for VFIO live migration crypto: hisilicon/qm: Set the VF QM state register hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driver hisi_acc_vfio_pci: Restrict access to VF dev BAR2 migration region hisi_acc_vfio_pci: add new vfio_pci driver for HiSilicon ACC devices hisi_acc_qm: Move VF PCI device IDs to common header crypto: hisilicon/qm: Move few definitions to common header crypto: hisilicon/qm: Move the QM header to include/linux vfio/mlx5: Fix to not use 0 as NULL pointer PCI/IOV: Fix wrong kernel-doc identifier vfio/mlx5: Use its own PCI reset_done error handler vfio/pci: Expose vfio_pci_core_aer_err_detected() vfio/mlx5: Implement vfio_pci driver for mlx5 devices vfio/mlx5: Expose migration commands over mlx5 device vfio: Remove migration protocol v1 documentation vfio: Extend the device migration protocol with RUNNING_P2P vfio: Define device migration protocol v2 ...

net/mlx5e: Fix build warning, detected write beyond size of field

2022-03-22T23:48:56+00:00

When merged with Linus tree, the cited patch below will cause the following build warning: In function 'fortify_memset_chk', inlined from 'mlx5e_xmit_xdp_frame' at drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c:438:3: include/linux/fortify-string.h:242:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix that by grouping the fields to memeset in struct_group() to avoid the false alarm. Fixes: 9ded70fa1d81 ("net/mlx5e: Don't prefill WQEs in XDP SQ in the multi buffer mode") Reported-by: Stephen Rothwell Suggested-by: Stephen Rothwell Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20220322172224.31849-1-saeed@kernel.org Signed-off-by: Jakub Kicinski

net/mlx5: Remove unused fill page array API function

2022-03-17T18:51:58+00:00

mlx5_fill_page_array API function is not used. Remove it, reduce the number of exported functions. Signed-off-by: Tariq Toukan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Remove unused exported contiguous coherent buffer allocation API

2022-03-17T18:51:58+00:00

All WQ types moved to using the fragmented allocation API for coherent memory. Contiguous API is not used anymore. Remove it, reduce the number of exported functions. Signed-off-by: Tariq Toukan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Parse module mapping using mlx5_ifc

2022-03-11T07:38:25+00:00

The assumption that the first byte in the module mapping dword is the module number shouldn't be hard-coded in the driver, but come from mlx5_ifc structs. While at it, fix the incorrect width for the 'rx_lane' and 'tx_lane' fields. Signed-off-by: Gal Pressman Reviewed-by: Maxim Mikityanskiy Signed-off-by: Saeed Mahameed

net/mlx5: Query the maximum MCIA register read size from firmware

2022-03-11T07:38:24+00:00

The MCIA register supports either 12 or 32 dwords, use the correct value by querying the capability from the MCAM register. Signed-off-by: Gal Pressman Reviewed-by: Maxim Mikityanskiy Signed-off-by: Saeed Mahameed

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-03-11T01:16:56+00:00

net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

net/mlx5: DR, Add support for ConnectX-7 steering

2022-03-09T21:33:04+00:00

Add support for a new SW format version that is implemented by ConnectX-7. Except for several differences, the STEv2 is identical to STEv1, so for most callbacks the STEv2 context struct will call STEv1 functions. Signed-off-by: Yevgeny Kliteynik Reviewed-by: Alex Vesker Signed-off-by: Saeed Mahameed