Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v5.7.4 2020-05-23T00:28:38+00:00 2020-05-23T00:28:38+00:00 Eran Ben Elisha eranbe@mellanox.com 2020-03-19T19:43:13+00:00 urn:sha1:f7936ddd35d8b849daf0372770c7c9dbe7910fca When driver is reloading during recovery flow, it can't get new commands till command interface is up again. Otherwise we may get to null pointer trying to access non initialized command structures. Add cmdif state to avoid processing commands while cmdif is not ready. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 2020-05-23T00:28:36+00:00 Eran Ben Elisha eranbe@mellanox.com 2020-03-18T19:44:32+00:00 urn:sha1:d43b7007dbd1195a5b6b83213e49b1516aaf6f5e After driver creates (via FW command) an EQ for commands, the driver will be informed on new commands completion by EQE. However, due to a race in driver's internal command mode metadata update, some new commands will still be miss-handled by driver as if we are in polling mode. Such commands can get two non forced completion, leading to already freed command entry access. CREATE_EQ command, that maps EQ to the command queue must be posted to the command queue while it is empty and no other command should be posted. Add SW mechanism that once the CREATE_EQ command is about to be executed, all other commands will return error without being sent to the FW. Allow sending other commands only after successfully changing the driver's internal command mode metadata. We can safely return error to all other commands while creating the command EQ, as all other commands might be sent from the user/application during driver load. Application can rerun them later after driver's load was finished. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 2020-05-23T00:28:34+00:00 Moshe Shemesh moshe@mellanox.com 2019-12-27T05:01:53+00:00 urn:sha1:17d00e839d3b592da9659c1977d45f85b77f986a When FW response to commands is very slow and all command entries in use are waiting for completion we can have a race where commands can get timeout before they get out of the queue and handled. Timeout completion on uninitialized command will cause releasing command's buffers before accessing it for initialization and then we will get NULL pointer exception while trying access it. It may also cause releasing buffers of another command since we may have timeout completion before even allocating entry index for this command. Add entry handling completion to avoid this race. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 2020-04-02T01:18:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-04-02T01:18:18+00:00 urn:sha1:919dce24701f7b34681a6a1d3ef95c9f6c4fb1cc Pull rdma updates from Jason Gunthorpe: "The majority of the patches are cleanups, refactorings and clarity improvements. This cycle saw some more activity from Syzkaller, I think we are now clean on all but one of those bugs, including the long standing and obnoxious rdma_cm locking design defect. Continue to see many drivers getting cleanups, with a few new user visible features. Summary: - Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1 - Lots of cleanup patches for hns - Convert more places to use refcount - Aggressively lock the RDMA CM code that syzkaller says isn't working - Work to clarify ib_cm - Use the new ib_device lifecycle model in bnxt_re - Fix mlx5's MR cache which seems to be failing more often with the new ODP code - mlx5 'dynamic uar' and 'tx steering' user interfaces" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits) RDMA/bnxt_re: make bnxt_re_ib_init static IB/qib: Delete struct qib_ivdev.qp_rnd RDMA/hns: Fix uninitialized variable bug RDMA/hns: Modify the mask of QP number for CQE of hip08 RDMA/hns: Reduce the maximum number of extend SGE per WQE RDMA/hns: Reduce PFC frames in congestion scenarios RDMA/mlx5: Add support for RDMA TX flow table net/mlx5: Add support for RDMA TX steering IB/hfi1: Call kobject_put() when kobject_init_and_add() fails IB/hfi1: Fix memory leaks in sysfs registration and unregistration IB/mlx5: Move to fully dynamic UAR mode once user space supports it IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib IB/mlx5: Extend QP creation to get uar page index from user space IB/mlx5: Extend CQ creation to get uar page index from user space IB/mlx5: Expose UAR object and its alloc/destroy commands IB/hfi1: Get rid of a warning RDMA/hns: Remove redundant judgment of qp_type RDMA/hns: Remove redundant assignment of wc->smac when polling cq RDMA/hns: Remove redundant qpc setup operations RDMA/hns: Remove meaningless prints ... 2020-03-30T06:42:11+00:00 Saeed Mahameed saeedm@mellanox.com 2020-03-30T06:41:50+00:00 urn:sha1:e999a7343da734f24643fcfcfa821e214126480f * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: mlx5: Remove uninitialized use of key in mlx5_core_create_mkey {IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib {IB,net}/mlx5: Assign mkey variant in mlx5_ib only {IB,net}/mlx5: Setup mkey variant before mr create command invocation Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 2020-03-27T15:59:04+00:00 Leon Romanovsky leonro@mellanox.com 2020-03-24T06:01:42+00:00 urn:sha1:2152862298fbfd237d37c231dfca8ae8f3ed0e48 struct mlx5_bfreg_info is used by mlx5_ib only but is exposed to both RDMA and netdev parts of mlx5 driver. Move that struct to mlx5_ib namespace, clean vertical space alignment and convert lib_uar_4k from bool to bitfield. Link: https://lore.kernel.org/r/20200324060143.1569116-5-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 2020-03-13T13:48:10+00:00 Michael Guralnik michaelgur@mellanox.com 2020-03-10T08:22:30+00:00 urn:sha1:a3cfdd3928113012d0f2c5353277f4e27878a663 As mlx5_ib is the only user of the mlx5_core_create_mkey_cb, move the logic inside mlx5_ib and cleanup the code in mlx5_core. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> 2020-03-13T13:48:04+00:00 Saeed Mahameed saeedm@mellanox.com 2020-03-10T08:22:28+00:00 urn:sha1:fc6a9f86f08acd3665f788619afae0d2b2d5a480 mkey variant is not required for mlx5_core use, move the mkey variant counter to mlx5_ib. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> 2020-03-09T23:58:26+00:00 Saeed Mahameed saeedm@mellanox.com 2020-03-09T20:01:26+00:00 urn:sha1:a70ed9d8ecf395ca7d15c2d13782cc0055398ed5 This series adds some HW bits and definitions for mlx5 driver, to be used by downstream features in both rdma and netdev branches. * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: HW bit for goto chain offload support net/mlx5: Expose link speed directly net/mlx5: Introduce TLS and IPSec objects enums net/mlx5: Introduce egress acl forward-to-vport capability net/mlx5: Expose raw packet pacing APIs net/mlx5e: Replace zero-length array with flexible-array member net/mlx5: fix spelling mistake "reserverd" -> "reserved" Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 2020-03-05T12:18:09+00:00 Yishai Hadas yishaih@mellanox.com 2020-02-19T19:05:17+00:00 urn:sha1:1326034b3ce7073e3ed74bd0f4d24afee96a9e07 Expose raw packet pacing APIs to be used by DEVX based applications. The existing code was refactored to have a single flow with the new raw APIs. The new raw APIs considered the input of 'pp_rate_limit_context', uid, 'dedicated', upon looking for an existing entry. This raw mode enables future device specification data in the raw context without changing the existing logic and code. The ability to ask for a dedicated entry gives control for application to allocate entries according to its needs. A dedicated entry may not be used by some other process and it also enables the process spreading its resources to some different entries for use different hardware resources as part of enforcing the rate. The counter per entry was changed to be u64 to prevent any option to overflow. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>