kernel/linux.git/include/linux/mlx5/driver.h, branch v5.18.16

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-03-24T20:13:26+00:00

Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...

net/mlx5: Remove unused fill page array API function

2022-03-17T18:51:58+00:00

mlx5_fill_page_array API function is not used. Remove it, reduce the number of exported functions. Signed-off-by: Tariq Toukan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Remove unused exported contiguous coherent buffer allocation API

2022-03-17T18:51:58+00:00

All WQ types moved to using the fragmented allocation API for coherent memory. Contiguous API is not used anymore. Remove it, reduce the number of exported functions. Signed-off-by: Tariq Toukan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Add debugfs counters for page commands failures

2022-03-09T21:33:02+00:00

Add the following new debugfs counters for debug and verbosity: fw_pages_alloc_failed - number of pages FW requested but driver failed to allocate. give_pages_dropped - number of pages given to FW, but command give pages failed by FW. reclaim_pages_discard - number of pages which were about to reclaim back and FW failed the command. Signed-off-by: Moshe Shemesh Reviewed-by: Leon Romanovsky Signed-off-by: Saeed Mahameed

net/mlx5: Add pages debugfs

2022-03-09T21:33:02+00:00

Add pages debugfs to expose the following counters for debuggability: fw_pages_total - How many pages were given to FW and not returned yet. vfs_pages - For SRIOV, how many pages were given to FW for virtual functions usage. host_pf_pages - For ECPF, how many pages were given to FW for external hosts physical functions usage. Signed-off-by: Moshe Shemesh Reviewed-by: Leon Romanovsky Signed-off-by: Saeed Mahameed

net/mlx5: Move debugfs entries to separate struct

2022-03-09T21:33:02+00:00

Move the debugfs entry pointers under priv to their own struct. Add get function for device debugfs root. Signed-off-by: Moshe Shemesh Reviewed-by: Leon Romanovsky Signed-off-by: Saeed Mahameed

net/mlx5: Add command failures data to debugfs

2022-03-09T21:33:00+00:00

Add new counters to command interface debugfs to count command failures. The following counters added: total_failed - number of times command failed (any kind of failure). failed_mbox_status - number of times command failed on bad status returned by FW. In addition, add data about last command failure to command interface debugfs: last_failed_errno - last command failed returned errno. last_failed_mbox_status - last bad status returned by FW. Signed-off-by: Moshe Shemesh Reviewed-by: Leon Romanovsky Signed-off-by: Saeed Mahameed

net/mlx5: Expose APIs to get/put the mlx5 core device

2022-02-27T09:41:21+00:00

Expose an API to get the mlx5 core device from a given VF PCI device if mlx5_core is its driver. Upon the get API we stay with the intf_state_mutex locked to make sure that the device can't be gone/unloaded till the caller will complete its job over the device, this expects to be for a short period of time for any flow that the lock is taken. Upon the put API we unlock the intf_state_mutex. The use case for those APIs is the migration flow of a VF over VFIO PCI. In that case the VF doesn't ride on mlx5_core, because the device is driving *two* different PCI devices, the PF owned by mlx5_core and the VF owned by the vfio driver. The mlx5_core of the PF is accessed only during the narrow window of the VF's ioctl that requires its services. This allows the PF driver to be more independent of the VF driver, so long as it doesn't reset the FW. Link: https://lore.kernel.org/all/20220224142024.147653-6-yishaih@nvidia.com Signed-off-by: Yishai Hadas Signed-off-by: Leon Romanovsky

net/mlx5: Add clarification on sync reset failure

2022-02-23T23:21:59+00:00

In case devlink reload action fw_activate failed in sync reset stage, use the new MFRL field reset_state to find why it failed and share this clarification with the user. Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: cmdif, Refactor error handling and reporting of async commands

2022-02-23T23:21:59+00:00

Same as the new mlx5_cmd_do API, report all information to callers and let them handle the error values and outbox parsing. The user callback status "work->user_callback(status)" is now similar to the error rc code returned from the blocking mlx5_cmd_do() version, and now is defined as follows: -EREMOTEIO : Command executed by FW, outbox.status != MLX5_CMD_STAT_OK. Caller must check FW outbox status. 0 : Command execution successful, outbox.status == MLX5_CMD_STAT_OK. < 0 : Command couldn't execute, FW or driver induced error. Signed-off-by: Saeed Mahameed Signed-off-by: Saeed Mahameed