kernel/linux.git/include/linux/mlx5/device.h, branch v4.6.3

IB/mlx5: Expose correct max_sge_rd limit

2016-04-28T14:49:17+00:00

mlx5 devices (Connect-IB, ConnectX-4, ConnectX-4-LX) has a limitation where rdma read work queue entries cannot exceed 512 bytes. A rdma_read wqe needs to fit in 512 bytes: - wqe control segment (16 bytes) - rdma segment (16 bytes) - scatter elements (16 bytes each) So max_sge_rd should be: (512 - 16 - 16) / 16 = 30. Cc: linux-stable@vger.kernel.org Reported-by: Christoph Hellwig Tested-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2016-03-22T22:48:44+00:00

Pull more rdma updates from Doug Ledford: "Round two of 4.6 merge window patches. This is a monster pull request. I held off on the hfi1 driver updates (the hfi1 driver is intimately tied to the qib driver and the new rdmavt software library that was created to help both of them) in my first pull request. The hfi1/qib/rdmavt update is probably 90% of this pull request. The hfi1 driver is being left in staging so that it can be fixed up in regards to the API that Al and yourself didn't like. Intel has agreed to do the work, but in the meantime, this clears out 300+ patches in the backlog queue and brings my tree and their tree closer to sync. This also includes about 10 patches to the core and a few to mlx5 to create an infrastructure for configuring SRIOV ports on IB devices. That series includes one patch to the net core that we sent to netdev@ and Dave Miller with each of the three revisions to the series. We didn't get any response to the patch, so we took that as implicit approval. Finally, this series includes Intel's new iWARP driver for their x722 cards. It's not nearly the beast as the hfi1 driver. It also has a linux-next merge issue, but that has been resolved and it now passes just fine. Summary: - A few minor core fixups needed for the next patch series - The IB SRIOV series. This has bounced around for several versions. Of note is the fact that the first patch in this series effects the net core. It was directed to netdev and DaveM for each iteration of the series (three versions total). Dave did not object, but did not respond either. I've taken this as permission to move forward with the series. - The new Intel X722 iWARP driver - A huge set of updates to the Intel hfi1 driver. Of particular interest here is that we have left the driver in staging since it still has an API that people object to. Intel is working on a fix, but getting these patches in now helps keep me sane as the upstream and Intel's trees were over 300 patches apart" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (362 commits) IB/ipoib: Allow mcast packets from other VFs IB/mlx5: Implement callbacks for manipulating VFs net/mlx5_core: Implement modify HCA vport command net/mlx5_core: Add VF param when querying vport counter IB/ipoib: Add ndo operations for configuring VFs IB/core: Add interfaces to control VF attributes IB/core: Support accessing SA in virtualized environment IB/core: Add subnet prefix to port info IB/mlx5: Fix decision on using MAD_IFC net/core: Add support for configuring VF GUIDs IB/{core, ulp} Support above 32 possible device capability flags IB/core: Replace setting the zero values in ib_uverbs_ex_query_device net/mlx5_core: Introduce offload arithmetic hardware capabilities net/mlx5_core: Refactor device capability function net/mlx5_core: Fix caching ATOMIC endian mode capability ib_srpt: fix a WARN_ON() message i40iw: Replace the obsolete crypto hash interface with shash IB/hfi1: Add SDMA cache eviction algorithm IB/hfi1: Switch to using the pin query function IB/hfi1: Specify mm when releasing pages ...

net/mlx5_core: Introduce offload arithmetic hardware capabilities

2016-03-21T20:32:35+00:00

Define the necessary hardware structures for the offload arithmetic capabilities and read/cache them on driver load. Signed-off-by: Sagi Grimberg Signed-off-by: Leon Romanovsky Reviewed-by: Saeed Mahameed Signed-off-by: Doug Ledford

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2016-03-19T17:05:34+00:00

Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...

Merge branches 'mlx4', 'mlx5' and 'ocrdma' into k.o/for-4.6

2016-03-16T17:38:28+00:00

IB/mlx5: Add support for don't trap rules

2016-03-10T14:22:06+00:00

Each bypass flow steering priority will be split into two priorities: 1. Priority for don't trap rules. 2. Priority for normal rules. When user creates a flow using IB_FLOW_ATTR_FLAGS_DONT_TRAP flag, the driver creates two flow rules, one used for receiving the traffic and the other one for forwarding the packet to continue matching in lower or equal priorities. Signed-off-by: Maor Gottlieb Reviewed-by: Matan Barak Signed-off-by: Doug Ledford

IB/mlx5: Modify MAD reading counters method to use counter registers

2016-03-01T15:57:15+00:00

Modify mlx5_ib_process_mad to use PPCNT and query_vport commands instead of MAD_IFC, as MAD_IFC is deprecated on new firmware versions (and doesn't support RoCE anyway). Traffic counters exist in both 32-bit and 64-bit forms. Declaring support of extended coutners results in traffic counters to be read in their 64-bit form only via the query_vport command. Error counters exist only in 32-bit form and read via PPCNT command. This commit also adds counters support in RoCE. Signed-off-by: Meny Yossefi Signed-off-by: Majd Dibbiny Reviewed-by: Matan Barak Signed-off-by: Doug Ledford

net/mlx5_core: Add helper function to read IB error counters

2016-03-01T15:57:15+00:00

Added helper function to read IB standard error counters via the PPCNT register. The PPCNT register read command provides the 32-bit error counters of both IB/RoCE link layer and transport layer. Signed-off-by: Meny Yossefi Signed-off-by: Majd Dibbiny Reviewed-by: Matan Barak Signed-off-by: Doug Ledford

net/mlx5e: Wake On LAN support

2016-02-24T18:50:21+00:00

Implement set/get WOL by ethtool and added the needed device commands and structures to mlx5_ifc. Signed-off-by: Tariq Toukan Signed-off-by: Rana Shahout Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

net/mlx5e: Implement DCBNL IEEE max rate

2016-02-24T18:50:21+00:00

Add support for DCBNL IEEE get/set max rate. Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller