kernel/linux.git/include/linux/mlx4, branch v3.6.3

net/mlx4_core: Add security check / enforcement for flow steering rules set for VMs

2012-09-07T16:55:59+00:00

Since VFs may be mapped to VMs which aren't trusted entities, flow steering rules attached through the wrapper on behalf of VFs must be checked to make sure that their L2 specification relate to MAC address assigned to that VF, and add L2 specification if its missing. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4_core: Put Firmware flow steering structures in common header files

2012-09-07T16:55:59+00:00

To allow for usage of the flow steering Firmware structures in more locations over the driver, such as the resource tracker, move them from mcg.c to common header files. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

Merge tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2012-07-24T20:56:26+00:00

Pull InfiniBand/RDMA changes from Roland Dreier: - Updates to the qib low-level driver - First chunk of changes for SR-IOV support for mlx4 IB - RDMA CM support for IPv6-only binding - Other misc cleanups and fixes Fix up some add-add conflicts in include/linux/mlx4/device.h and drivers/net/ethernet/mellanox/mlx4/main.c * tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits) IB/qib: checkpatch fixes IB/qib: Add congestion control agent implementation IB/qib: Reduce sdma_lock contention IB/qib: Fix an incorrect log message IB/qib: Fix QP RCU sparse warnings mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them mlx4_core: Allow guests to have IB ports mlx4_core: Implement mechanism for reserved Q_Keys net/mlx4_core: Free ICM table in case of error IB/cm: Destroy idr as part of the module init error flow mlx4_core: Remove double function declarations IB/mlx4: Fill the masked_atomic_cap attribute in query device IB/mthca: Fill in sq_sig_type in query QP IB/mthca: Warning about event for non-existent QPs should show event type IB/qib: Fix sparse RCU warnings in qib_keys.c net/mlx4_core: Initialize IB port capabilities for all slaves mlx4: Use port management change event instead of smp_snoop IB/qib: RCU locking for MR validation IB/qib: Avoid returning EBUSY from MR deregister IB/qib: Fix UC MR refs for immediate operations ...

{NET,IB}/mlx4: Add rmap support to mlx4_assign_eq

2012-07-19T15:34:37+00:00

Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap. If supplied, the assigned IRQ is tracked using rmap infrastructure. Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4: Move MAC_MASK to a common place

2012-07-19T15:34:37+00:00

Define this macro is one common place instead of duplicating it over the code Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them

2012-07-11T18:52:23+00:00

To allow easy paravirtualization of P_Key and GID table sizes, keep paravirtualized sizes in mlx4_dev->caps, but save the actual physical sizes from FW in struct: mlx4_dev->phys_cap. In addition, in SR-IOV mode, do the following: 1. Reduce reported P_Key table size by 1. This is done to reserve the highest P_Key index for internal use, for declaring an invalid P_Key in P_Key paravirtualization. We require a P_Key index which always contain an invalid P_Key value for this purpose (i.e., one which cannot be modified by the subnet manager). The way to do this is to reduce the P_Key table size reported to the subnet manager by 1, so that it will not attempt to access the P_Key at index #127. 2. Paravirtualize the GID table size to 1. Thus, each guest sees only a single GID (at its paravirtualized index 0). In addition, since we are paravirtualizing the GID table size to 1, we add paravirtualization of the master GID event here (i.e., we do not do ib_dispatch_event() for the GUID change event on the master, since its (only) GUID never changes). Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

mlx4_core: Implement mechanism for reserved Q_Keys

2012-07-11T18:35:55+00:00

The SR-IOV special QP tunneling mechanism uses proxy special QPs (instead of the real special QPs) for MADs on guests. These proxy QPs send their packets to a "tunnel" QP owned by the master. The master then forwards the MAD (after any required paravirtualization) to the real special QP, which sends out the MAD. For security reasons (i.e., to prevent guests from sending MADs to tunnel QPs belonging to other guests), each proxy-tunnel QP pair is assigned a unique, reserved, Q_Key. These Q_Keys are available only for proxy and tunnel QPs -- if the guest tries to use these Q_Keys with other QPs, it will fail. This patch introduces a mechanism for reserving a block of 64K Q_Keys for proxy/tunneling use. The patch introduces also two new fields into mlx4_dev: base_sqpn and base_tunnel_sqpn. In SR-IOV mode, the QP numbers for the "real," proxy, and tunnel sqps are added to the reserved QPN area (so that they will not change). There are 8 special QPs per port in the HCA, and each of them is assigned both a proxy and a tunnel QP, for each VF and for the PF as well in SR-IOV mode. The QPNs for these QPs are arranged as follows: 1. The real SQP numbers (8) 2. The proxy SQPs (8 * (max number of VFs + max number of PFs) 3. The tunnel SQPs (8 * (max number of VFs + max number of PFs) To support these QPs, two new fields are added to struct mlx4_dev: base_sqp: this is the QP number of the first of the real SQPs base_tunnel_sqp: this is the qp number of the first qp in the tunnel sqp region. (On guests, this is the first tunnel sqp of the 8 which are assigned to that guest). In addition, in SR-IOV mode, sqp_start is the number of the first proxy SQP in the proxy SQP region. (In guests, this is the first proxy SQP of the 8 which are assigned to that guest) Note that in non-SR-IOV mode, there are no proxies and no tunnels. In this case, sqp_start is set to sqp_base -- which minimizes code changes. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

net/mlx4_core: Initialize IB port capabilities for all slaves

2012-07-10T16:57:06+00:00

With IB SR-IOV, each slave has its own separate copy of the port capabilities flags. For example, the master can run a subnet manager (which causes the IsSM bit to be set in the master's port capabilities) without affecting the port capabilities seen by the slaves (the IsSM bit will be seen as cleared in the slaves). Also add a static inline mlx4_master_func_num() to enhance readability of the code. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

mlx4: Use port management change event instead of smp_snoop

2012-07-10T16:47:10+00:00

The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

mlx4_core: Pass an invalid PCI id number to VFs

2012-07-09T01:05:05+00:00

Currently, VFs have 0 in their dev->caps.function field. This is a valid pci id (usually of the PF). Instead, pass an invalid PCI id to the VF via QUERY_FW, so that if the value gets accessed in the VF driver, we'll catch the problem. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier