kernel/linux.git/include/linux/mlx4, branch linux-4.3.y

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2015-09-09T15:33:31+00:00

Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...

IB/mlx4: Implement ib_device callbacks

2015-08-30T22:12:20+00:00

get_netdev: get the net_device on the physical port of the IB transport port. In port aggregation mode it is required to return the netdev of the active port. modify_gid: note for a change in the RoCE gid cache. Handle this by writing to the harsware GID table. It is possible that indexes in cahce and hardware tables won't match so a translation is required when modifying a QP or creating an address handle. Signed-off-by: Moni Shoua Signed-off-by: Doug Ledford

net/mlx4: Postpone the registration of net_device

2015-08-30T22:12:20+00:00

The mlx4 network driver was registered in the context of the 'add' function of the core driver (called when HW should be registered). This makes the netdev event NETDEV_REGISTER to be sent in a context where the answer to get_protocol_dev() callback returns NULL. This may be confusing to listeners of netdev events. This patch is a preparation to the patch that implements the get_netdev() callback in the IB/mlx4 driver. Signed-off-by: Moni Shoua Signed-off-by: Doug Ledford

net/mlx4_en: Add support for hardware accelerated 802.1ad vlan

2015-07-27T22:00:37+00:00

To enable device support in accelerated 802.1ad vlan, the port capability "packet has vlan enable" (phv_en) should be set. Firmware won't work properly, in case phv_en is not set. The user can enable "phv_en" port capability with the new ethtool private flag phv-bit. The phv-bit private flag default value is OFF, users who are interested in 802.1ad hardware acceleration should turn ON the phv-bit private flag: $ ethtool --set-priv-flags eth1 phv-bit on Once the private flag is set, the device is ready for 802.1ad vlan acceleration. The user should also change the interface device features and turn on "tx-vlan-stag-hw-insert" which is off by default: $ ethtool -K eth1 tx-vlan-stag-hw-insert on "phv-bit" private flag setting is available only for Physical Functions(PF), the Virtual Function (VF) will be able to use the feature by setting "tx-vlan-stag-hw-insert" ethtool device feature only if the feature was enabled by the Hypervisor. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

net/mlx4: Prepare VLAN macros for 802.1ad Hardware accelerated support

2015-07-27T22:00:37+00:00

To add Hardware accelerated support in 802.1ad vlan, replace Current VLAN macros to CVLAN. Replace: MLX4_WQE_CTRL_INS_VLAN MLX4_CQE_VLAN_PRESENT_MASK With: MLX4_WQE_CTRL_INS_CVLAN MLX4_CQE_CVLAN_PRESENT_MASK Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

net/mlx4_core: Preparations for 802.1ad VLAN support

2015-07-27T22:00:36+00:00

mlx4_core preparation to support hardware accelerated 802.1ad VLAN device. To allow 802.1ad accelerated device, "packet has vlan" (phv) Firmware capability should be available. Firmware without the phv capability won't behave properly and can't support 802.1ad device acceleration. The driver checks the Firmware capability and sets the phv bit accordingly in SET_PORT command. Signed-off-by: Hadar Hen Zion Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2015-06-24T23:49:49+00:00

Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...

net/mlx4_en: Support ndo_get_vf_stats

2015-06-16T00:23:03+00:00

Implement the ndo to gather VF statistics through the PF. All counters related to this VF are stored in a per slave list, run over the slave's list and collect all statistics. Signed-off-by: Eran Ben Elisha Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4_core: Add helper to query counters

2015-06-16T00:23:02+00:00

This is an infrastructure step for querying VF and PF counters. This code was in the IB driver, move it to the mlx4 core driver so it will be accessible for more use cases. Signed-off-by: Eran Ben Elisha Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4_core: Allocate default counter per port

2015-06-16T00:23:02+00:00

Default counter per port will be allocated at the mlx4 core driver load. Every QP opened by the Ethernet driver will be attached to the port's default counter. This is an infrastructure step to collect VF statistics from the PF. Signed-off-by: Eran Ben Elisha Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller