kernel/linux.git/include/linux/mlx4/qp.h, branch v4.0.8

net/mlx4_core: Fix wrong mask and error flow for the update-qp command

2015-03-02T20:27:19+00:00

The bit mask for currently supported driver features (MLX4_UPDATE_QP_SUPPORTED_ATTRS) of the update-qp command was defined twice (using enum value and pre-processor define directive) and wrong. The return value of the call to mlx4_update_qp() from within the SRIOV resource-tracker was wrongly voided down. Fix both issues. issue: none Fixes: 09e05c3f78e9 ('net/mlx4: Set vlan stripping policy by the right command') Fixes: ce8d9e0d6746 ('net/mlx4_core: Add UPDATE_QP SRIOV wrapper support') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4_core: Port aggregation low level interface

2015-02-05T00:14:24+00:00

Implement the hardware interface required for port aggregation. 1. Disable RX port check on receive - don't perform a validity check that matches to QP's port and the port where the packet is received. 2. Virtual to physical port remap - configure virtual to physical port mapping. Port remap capability for virtual functions. Signed-off-by: Moni Shoua Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

mlx4: use netdev_rss_key_fill() helper

2014-11-16T20:59:13+00:00

Use of well known RSS key increases attack surface. Switch to a random one, using generic helper so that all ports share a common key. Also provide ethtool -x support to fetch RSS key Signed-off-by: Eric Dumazet Cc: Amir Vadai Signed-off-by: David S. Miller

net/mlx4: Set vlan stripping policy by the right command

2014-09-10T22:21:34+00:00

Changing the vlan stripping policy of the QP isn't supported by older firmware versions for the INIT2RTR command. Nevertheless, we've used it. Fix that by doing this policy change using INIT2RTR only if the firmware supports it, otherwise, we call UPDATE_QP command to do the task. Fixes: 7677fc9 ('net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4_core: Add UPDATE_QP SRIOV wrapper support

2014-05-16T19:12:45+00:00

This patch adds UPDATE_QP SRIOV wrapper support. The mechanism is a general one, but currently only source MAC index changes are allowed for VFs. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4_en: Use union for BlueFlame WQE

2014-03-03T01:04:01+00:00

When BlueFlame is turned on, control segment of the TX WQE is changed, and the second line of it is used for QPN. Changed code to use a union in the mlx4_wqe_ctrl_seg instead of casting. This makes the code clearer and solves the static checker warning: drivers/net/ethernet/mellanox/mlx4/en_tx.c:839 mlx4_en_xmit() warn: potential memory corrupting cast 4 vs 2 bytes CC: Dan Carpenter Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

net/mlx4_core: Add basic support for TCP/IP offloads under tunneling

2013-12-31T19:31:43+00:00

Add the low-level device commands and definitions used for TCP/IP HW offloads of tunneled/vxlan traffic which are supported by the ConnectX3-pro NIC. This is done through the following elements: - read tunneling device caps in QUERY_DEV_CAP - add helper function to do SET_PORT for tunneling - add DMFS VXLAN steering rule definitions - add CQE and WQE checksum offload field definitions Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

include: Convert ethernet mac address declarations to use ETH_ALEN

2013-08-02T19:33:54+00:00

It's convenient to have ethernet mac addresses use ETH_ALEN to be able to grep for them a bit easier and also to ensure that the addresses are __aligned(2). Add #include as necessary. Signed-off-by: Joe Perches Acked-by: Mauro Carvalho Chehab Signed-off-by: David S. Miller

net/mlx4_core: Add HW enforcement to VF link state

2013-07-01T20:10:57+00:00

When the firmware supports the UPDATE_QP command, if the VF link is disabled, block all QPs opened by the VF, by programming the UPDATE_QP command to drop all RX & TX traffic to/from these QPs. Operates only in VST mode. Signed-off-by: Rony Efraim Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4_core: Dynamic VST to VST vlan/qos changes

2013-07-01T20:10:22+00:00

Within VST mode, enable modifying the vlan and/or qos for a VF without requiring unbind/rebind. This requires firmware which supports the UPDATE_QP command. (If the command is not available, we fall back to requiring unbind/bind to activate these changes). To avoid race conditions with modify-qp on QPs that are affected by update-qp, this operation is performed on the comm_wq. If the update operation succeeds for all the necessary QPs, a vlan_unregister is performed for the abandoned vlan id. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller