kernel/linux.git/include/linux/mlx4/device.h, branch v5.2.20

{net, IB}/mlx4: Initialize CQ buffers in the driver when possible

2018-11-22T19:38:36+00:00

Perform CQ initialization in the driver when the capability is supported by the FW. When passing the CQ to HW indicate that the CQ buffer has been pre-initialized. Doing so decreases CQ creation time. Testing on P8 showed a single 2048 entry CQ creation time was reduced from ~395us to ~170us, which is 2.3x faster. Signed-off-by: Daniel Jurgens Signed-off-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller

net/mlx4_core: Use devlink region_snapshot parameter

2018-07-13T00:37:13+00:00

This parameter enables capturing region snapshot of the crspace during critical errors. The default value of this parameter is disabled, it can be enabled using devlink param commands. It is possible to configure during runtime and also driver init. Signed-off-by: Alex Vesker Signed-off-by: Jiri Pirko Reviewed-by: Moshe Shemesh Signed-off-by: David S. Miller

net/mlx4_core: Add Crdump FW snapshot support

2018-07-13T00:37:13+00:00

Crdump allows the driver to create a snapshot of the FW PCI crspace and health buffer during a critical FW issue. In case of a FW command timeout, FW getting stuck or a non zero value on the catastrophic buffer, a snapshot will be taken. The snapshot is exposed using devlink, cr-space, fw-health address regions are registered on init and snapshots are attached once a new snapshot is collected by the driver. Signed-off-by: Alex Vesker Signed-off-by: Tariq Toukan Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net/mlx4_core: Add health buffer address capability

2018-07-13T00:37:13+00:00

Health buffer address is a 32 bit PCI address offset provided by the FW. This offset is used for reading FW health debug data located on the shared CR space. Cr space is accessible in both driver and FW and allows for different queries and configurations. Health buffer size is always 64B of readable data followed by a lock which is used to block volatile CR space access. Signed-off-by: Alex Vesker Signed-off-by: Tariq Toukan Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net/mlx4_core: Report driver version to FW

2018-05-10T20:08:25+00:00

If supported, write a driver version string to FW as part of the INIT_HCA command. Example of driver version: "Linux,mlx4_core,4.0-0" Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller

RDMA/mlx4: Move flag constants to uapi header

2018-03-15T21:58:03+00:00

MLX4_USER_DEV_CAP_LARGE_CQE (via mlx4_ib_alloc_ucontext_resp.dev_caps) and MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET (via mlx4_uverbs_ex_query_device_resp.comp_mask) are copied directly to userspace and form part of the uAPI. Move them to the uapi header where they belong. Signed-off-by: Jason Gunthorpe

drivers, net, mlx4: convert mlx4_srq.refcount from atomic_t to refcount_t

2017-10-22T01:22:38+00:00

atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_srq.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook Reviewed-by: David Windsor Reviewed-by: Hans Liljestrand Signed-off-by: Elena Reshetova Signed-off-by: David S. Miller

drivers, net, mlx4: convert mlx4_qp.refcount from atomic_t to refcount_t

2017-10-22T01:22:38+00:00

atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_qp.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook Reviewed-by: David Windsor Reviewed-by: Hans Liljestrand Signed-off-by: Elena Reshetova Signed-off-by: David S. Miller

drivers, net, mlx4: convert mlx4_cq.refcount from atomic_t to refcount_t

2017-10-22T01:22:38+00:00

atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_cq.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook Reviewed-by: David Windsor Reviewed-by: Hans Liljestrand Signed-off-by: Elena Reshetova Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2017-09-06T21:45:08+00:00

Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...