kernel/linux.git/include/linux/mlx4/device.h, branch v4.7.4

net/mlx4_en: Avoid unregister_netdev at shutdown flow

2016-06-22T20:38:11+00:00

This allows a clean shutdown, even if some netdev clients do not release their reference from this netdev. It is enough to release the HW resources only as the kernel is shutting down. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Eran Ben Elisha Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller

net/mlx4: Avoid wrong virtual mappings

2016-05-06T03:23:05+00:00

The dma_alloc_coherent() function returns a virtual address which can be used for coherent access to the underlying memory. On some architectures, like arm64, undefined behavior results if this memory is also accessed via virtual mappings that are not coherent. Because of their undefined nature, operations like virt_to_page() return garbage when passed virtual addresses obtained from dma_alloc_coherent(). Any subsequent mappings via vmap() of the garbage page values are unusable and result in bad things like bus errors (synchronous aborts in ARM64 speak). The mlx4 driver contains code that does the equivalent of: vmap(virt_to_page(dma_alloc_coherent)), this results in an OOPs when the device is opened. Prevent Ethernet driver to run this problematic code by forcing it to allocate contiguous memory. As for the Infiniband driver, at first we are trying to allocate contiguous memory, but in case of failure roll back to work with fragmented memory. Signed-off-by: Haggai Abramovsky Signed-off-by: Yishai Hadas Reported-by: David Daney Tested-by: Sinan Kaya Signed-off-by: David S. Miller

net/mlx4_core: Avoid repeated calls to pci enable/disable

2016-04-21T19:02:40+00:00

Maintain the PCI status and provide wrappers for enabling and disabling the PCI device. Performing the actions more than once without doing its opposite results in warning logs. This occurred when EEH hotplugged the device causing a warning for disabling an already disabled device. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

IB/mlx4: Add support for the don't trap rule

2016-02-29T22:11:40+00:00

Add support for receiving multicast/unicast traffic with the don't trap rule. Sniffing these packets requires a flow steering rule of type NORMAL at priority 0 with flag IB_FLOW_ATTR_FLAGS_DONT_TRAP set. Choosing between multicast or unicast is done via ethernet L2 dest_mac mask and value: - If mask is all zeros - unicast and multicast are set. - If mask non zero - only mask with multicast bit 1 and rest 0 is supported, the mac value will choose if it is multicast or unicast rule. If the mask multicast bit is on and some other bits are on too, it means a request for specific multicast or unicast, this is not supported, either receive all multicast or all unicast. Only when limitations are met registered QP will receive requested type but other QPs can receive same traffic if registered for it. Otherwise, if limitations are not met, an error will be returned. Limitations: - Rule must be with priority 0. - A0 mode is not supported. - Sniffer QP cannot appear in any other flow steering rule. Signed-off-by: Marina Varshaver Reviewed-by: Matan Barak Reviewed-by: Yishai Hadas Signed-off-by: Doug Ledford

net/mlx4_core: Set UAR page size to 4KB regardless of system page size

2016-02-17T15:29:27+00:00

problem description: The current code sets UAR page size equal to system page size. The ConnectX-3 and ConnectX-3 Pro HWs require minimum 128 UAR pages. The mlx4 kernel drivers are not loaded if there is less than 128 UAR pages. solution: Always set UAR page to 4KB. This allows more UAR pages if the OS has PAGE_SIZE larger than 4KB. For example, PowerPC kernel use 64KB system page size, with 4MB uar region, there are 4MB/2/64KB = 32 uars (half for uar, half for blueflame). This does not meet minimum 128 UAR pages requirement. With 4KB UAR page, there are 4MB/2/4KB = 512 uars which meet the minimum requirement. Note that only codes in mlx4_core that deal with firmware know that uar page size is 4KB. Codes that deal with usr page in cq and qp context (mlx4_ib, mlx4_en and part of mlx4_core) still have the same assumption that uar page size equals to system page size. Note that with this implementation, on 64KB system page size kernel, there are 16 uars per system page but only one uars is used. The other 15 uars are ignored because of the above assumption. Regarding SR-IOV, mlx4_core in hypervisor will set the uar page size to 4KB and mlx4_core code in virtual OS will obtain the uar page size from firmware. Regarding backward compatibility in SR-IOV, if hypervisor has this new code, the virtual OS must be updated. If hypervisor has old code, and the virtual OS has this new code, the new code will be backward compatible with the old code. If the uar size is big enough, this new code in VF continues to work with 64 KB uar page size (on PowerPc kernel). If the uar size does not meet 128 uars requirement, this new code not loaded in VF and print the same error message as the old code in Hypervisor. Signed-off-by: Huy Nguyen Reviewed-by: Yishai Hadas Signed-off-by: David S. Miller

net/mlx4_core: Add support for configuring RoCE v2 UDP port

2016-01-19T20:35:00+00:00

In order to support RoCE v2, the hardware needs to be configured to classify certain UDP packets as RoCE v2 packets and pass it through its RoCE pipeline. This patch enables configuring this UDP port. Signed-off-by: Moni Shoua Signed-off-by: Matan Barak Signed-off-by: Doug Ledford

net/mlx4: Query RoCE support

2016-01-19T20:35:00+00:00

Query the RoCE support from firmware using the appropriate firmware commands. Downstream patches will read these capabilities and act accordingly. Signed-off-by: Moni Shoua Signed-off-by: Doug Ledford

net/mlx4: Remove unused macro

2016-01-19T20:24:53+00:00

The macro mlx4_foreach_non_ib_transport_port() is not used anywhere. Remove it. Fixes: aa9a2d51a3e7 ("mlx4: Activate RoCE/SRIOV") Signed-off-by: Moni Shoua Signed-off-by: Doug Ledford

mlx4: Expose correct max_sge_rd limit

2015-12-08T17:42:44+00:00

mlx4 devices (ConnectX-2, ConnectX-3) has a limitation where rdma read work queue entries cannot exceed 512 bytes. A rdma_read wqe needs to fit in 512 bytes: - wqe control segment (16 bytes) - rdma segment (16 bytes) - scatter elements (16 bytes each) So max_sge_rd should be: (512 - 16 - 16) / 16 = 30. Signed-off-by: Sagi Grimberg Reviewed-by: Steve Wise Signed-off-by: Doug Ledford

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2015-11-07T21:33:07+00:00

Pull rdma updates from Doug Ledford: "This is my initial round of 4.4 merge window patches. There are a few other things I wish to get in for 4.4 that aren't in this pull, as this represents what has gone through merge/build/run testing and not what is the last few items for which testing is not yet complete. - "Checksum offload support in user space" enablement - Misc cxgb4 fixes, add T6 support - Misc usnic fixes - 32 bit build warning fixes - Misc ocrdma fixes - Multicast loopback prevention extension - Extend the GID cache to store and return attributes of GIDs - Misc iSER updates - iSER clustering update - Network NameSpace support for rdma CM - Work Request cleanup series - New Memory Registration API" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (76 commits) IB/core, cma: Make __attribute_const__ declarations sparse-friendly IB/core: Remove old fast registration API IB/ipath: Remove fast registration from the code IB/hfi1: Remove fast registration from the code RDMA/nes: Remove old FRWR API IB/qib: Remove old FRWR API iw_cxgb4: Remove old FRWR API RDMA/cxgb3: Remove old FRWR API RDMA/ocrdma: Remove old FRWR API IB/mlx4: Remove old FRWR API support IB/mlx5: Remove old FRWR API support IB/srp: Dont allocate a page vector when using fast_reg IB/srp: Remove srp_finish_mapping IB/srp: Convert to new registration API IB/srp: Split srp_map_sg RDS/IW: Convert to new memory registration API svcrdma: Port to new memory registration API xprtrdma: Port to new memory registration API iser-target: Port to new memory registration API IB/iser: Port to new fast registration API ...