kernel/linux.git/include/linux/mlx4/device.h, branch v3.15.2

net/mlx4: Implement vxlan ndo calls

2014-03-28T20:29:35+00:00

Add implementation for the add/del vxlan port ndo calls, using the CONFIG_DEV firmware command. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

mlx4: Add support for CONFIG_DEV command

2014-03-28T20:29:35+00:00

Introduce the CONFIG_DEV firmware command which we will use to configure the UDP port assumed by the firmware for the VXLAN offloads. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4: Adapt code for N-Port VF

2014-03-20T20:18:30+00:00

Adds support for N-Port VFs, this includes: 1. Adding support in the wrapped FW command In wrapped commands, we need to verify and convert the slave's port into the real physical port. Furthermore, when sending the response back to the slave, a reverse conversion should be made. 2. Adjusting sqpn for QP1 para-virtualization The slave assumes that sqpn is used for QP1 communication. If the slave is assigned to a port != (first port), we need to adjust the sqpn that will direct its QP1 packets into the correct endpoint. 3. Adjusting gid[5] to modify the port for raw ethernet In B0 steering, gid[5] contains the port. It needs to be adjusted into the physical port. 4. Adjusting number of ports in the query / ports caps in the FW commands When a slave queries the hardware, it needs to view only the physical ports it's assigned to. 5. Adjusting the sched_qp according to the port number The QP port is encoded in the sched_qp, thus in modify_qp we need to encode the correct port in sched_qp. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4: Add utils for N-Port VFs

2014-03-20T20:18:29+00:00

This patch adds the following utils: 1. Convert slave_id -> VF 2. Get the active ports by slave_id 3. Convert slave's port to real port 4. Get the slave's port from real port 5. Get all slaves that uses the i'th real port 6. Get all slaves that uses the i'th real port exclusively Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4: Add data structures to support N-Ports per VF

2014-03-20T20:18:29+00:00

Adds the required data structures to support VFs with N (1 or 2) ports instead of always using the number of physical ports. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

mlx4: Implement IP based gids support for RoCE/SRIOV

2014-03-12T19:57:16+00:00

Since there is no connection between the MAC/VLAN and the GID when using IP-based addressing, the proxy QP1 (running on the slave) must pass the source-mac, destination-mac, and vlan_id information separately from the GID. Additionally, the Host must pass the remote source-mac and vlan_id back to the slave, This is achieved as follows: Outgoing MADs: 1. Source MAC: obtained from the CQ completion structure (struct ib_wc, smac field). 2. Destination MAC: obtained from the tunnel header 3. vlan_id: obtained from the tunnel header. Incoming MADs 1. The source (i.e., remote) MAC and vlan_id are passed in the tunnel header to the proxy QP1. VST mode support: For outgoing MADs, the vlan_id obtained from the header is discarded, and the vlan_id specified by the Hypervisor is used instead. For incoming MADs, the incoming vlan_id (in the wc) is discarded, and the "invalid" vlan (0xffff) is substituted when forwarding to the slave. Signed-off-by: Moni Shoua Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

mlx4: In RoCE allow guests to have multiple GIDS

2014-03-12T19:57:14+00:00

The GIDs are statically distributed, as follows: PF: gets 16 GIDs VFs: Remaining GIDS are divided evenly between VFs activated by the driver. If the division is not even, lower-numbered VFs get an extra GID. For an IB interface, the number of gids per guest remains as before: one gid per guest. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

mlx4_core: For RoCE, allow slaves to set the GID entry at that slave's index

2014-03-12T19:57:13+00:00

For IB transport, the host determines the slave GIDs. For ETH (RoCE), however, the slave's GID is determined by the IP address that the slave itself assigns to the ETH device used by RoCE. In this case, the slave must be able to write its GIDs to the HCA gid table (at the GID indices that slave "owns"). This commit adds processing for the SET_PORT_GID_TABLE opcode modifier for the SET_PORT command wrapper (so that slaves may modify their GIDS for RoCE). Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

mlx4: Adjust QP1 multiplexing for RoCE/SRIOV

2014-03-12T19:57:12+00:00

This requires the following modifications: 1. Fix build_mlx4_header to properly fill in the ETH fields 2. Adjust mux and demux QP1 flow to support RoCE. This commit still assumes only one GID per slave for RoCE. The commit enabling multiple GIDs is a subsequent commit, and is done separately because of its complexity. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2014-01-25T19:17:34+00:00

Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...