kernel/linux.git/include/linux/mfd, branch v6.18.21

mfd: tps65219: Implement LOCK register handling for TPS65214

2026-03-04T12:21:12+00:00

[ Upstream commit d3fcf276b501a82d4504fd5b1ed40249546530d1 ] The TPS65214 PMIC variant has a LOCK_REG register that prevents writes to nearly all registers when locked. Unlock the registers at probe time and leave them unlocked permanently. This approach is justified because: - Register locking is very uncommon in typical system operation - No code path is expected to lock the registers during runtime - Adding a custom regmap write function would add overhead to every register write, including voltage changes triggered by CPU OPP transitions from the cpufreq governor which could happen quite frequently Cc: stable@vger.kernel.org Fixes: 7947219ab1a2d ("mfd: tps65219: Add support for TI TPS65214 PMIC") Reviewed-by: Andrew Davis Signed-off-by: Kory Maincent (TI.com) Link: https://patch.msgid.link/20251218-fix_tps65219-v5-1-8bb511417f3a@bootlin.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: wm8350-core: Use IRQF_ONESHOT

2026-02-26T22:59:05+00:00

[ Upstream commit 553b4999cbe231b5011cb8db05a3092dec168aca ] Using a threaded interrupt without a dedicated primary handler mandates the IRQF_ONESHOT flag to mask the interrupt source while the threaded handler is active. Otherwise the interrupt can fire again before the threaded handler had a chance to run. Mark explained that this should not happen with this hardware since it is a slow irqchip which is behind an I2C/ SPI bus but the IRQ-core will refuse to accept such a handler. Set IRQF_ONESHOT so the interrupt source is masked until the secondary handler is done. Fixes: 1c6c69525b40e ("genirq: Reject bogus threaded irq requests") Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Reviewed-by: Charles Keepax Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20260128095540.863589-16-bigeasy@linutronix.de Signed-off-by: Sasha Levin

Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2025-10-04T23:26:32+00:00

Pull Char/Misc/IIO/Binder updates from Greg KH: "Here is the big set of char/misc/iio and other driver subsystem changes for 6.18-rc1. Loads of different stuff in here, it was a busy development cycle in lots of different subsystems, with over 27k new lines added to the tree. Included in here are: - IIO updates including new drivers, reworking of existing apis, and other goodness in the sensor subsystems - MEI driver updates and additions - NVMEM driver updates - slimbus removal for an unused driver and some other minor updates - coresight driver updates and additions - MHI driver updates - comedi driver updates and fixes - extcon driver updates - interconnect driver additions - eeprom driver updates and fixes - minor UIO driver updates - tiny W1 driver updates But the majority of new code is in the rust bindings and additions, which includes: - misc driver rust binding updates for read/write support, we can now write "normal" misc drivers in rust fully, and the sample driver shows how this can be done. - Initial framework for USB driver rust bindings, which are disabled for now in the build, due to limited support, but coming in through this tree due to dependencies on other rust binding changes that were in here. I'll be enabling these back on in the build in the usb.git tree after -rc1 is out so that developers can continue to work on these in linux-next over the next development cycle. - Android Binder driver implemented in Rust. This is the big one, and was driving a huge majority of the rust binding work over the past years. Right now there are two binder drivers in the kernel, selected only at build time as to which one to use as binder wants to be included in the system at boot time. The binder C maintainers all agreed on this, as eventually, they want the C code to be removed from the tree, but it will take a few releases to get there while both are maintained to ensure that the rust implementation is fully stable and compliant with the existing userspace apis. All of these have been in linux-next for a while" * tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits) rust: usb: keep usb::Device private for now rust: usb: don't retain device context for the interface parent USB: disable rust bindings from the build for now samples: rust: add a USB driver sample rust: usb: add basic USB abstractions coresight: Add label sysfs node support dt-bindings: arm: Add label in the coresight components coresight: tnoc: add new AMBA ID to support Trace Noc V2 coresight: Fix incorrect handling for return value of devm_kzalloc coresight: tpda: fix the logic to setup the element size coresight: trbe: Return NULL pointer for allocation failures coresight: Refactor runtime PM coresight: Make clock sequence consistent coresight: Refactor driver data allocation coresight: Consolidate clock enabling coresight: Avoid enable programming clock duplicately coresight: Appropriately disable trace bus clocks coresight: Appropriately disable programming clocks coresight: etm4x: Support atclk coresight: catu: Support atclk ...

mfd: bd71828, bd71815: Prepare for power-supply support

2025-10-01T09:28:47+00:00

Add core support for ROHM BD718(15/28/78) PMIC's charger blocks. Signed-off-by: Matti Vaittinen Signed-off-by: Andreas Kemnade Link: https://lore.kernel.org/r/20250821-bd71828-charger-v3-1-cc74ac4e0fb9@kemnade.info Signed-off-by: Lee Jones

mfd: arizona: Make legacy gpiolib interface optional

2025-10-01T09:28:24+00:00

The only machine that still uses the old gpio number based interface is the wlf_cragg_6410 board file. In order to remove the dependency on the interfaces, add #ifdef blocks here. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20250808151822.536879-13-arnd@kernel.org Signed-off-by: Lee Jones

mfd: qnap-mcu: Include linux/types.h in qnap-mcu.h shared header

2025-10-01T09:28:13+00:00

Relying on other components to include those basic types is unreliable and may cause compile errors like: ../include/linux/mfd/qnap-mcu.h:13:9: error: unknown type name ‘u32’ 13 | u32 baud_rate; | ^~~ ../include/linux/mfd/qnap-mcu.h:17:9: error: unknown type name ‘bool’ 17 | bool usb_led; | ^~~~ So make sure, the types used in the header are available. Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20250804130726.3180806-2-heiko@sntech.de Signed-off-by: Lee Jones

Merge branches 'ib-mfd-char-crypto-6.18', 'ib-mfd-gpio-6.18', 'ib-mfd-gpio-hwmon-i2c-can-rtc-watchdog-6.18', 'ib-mfd-gpio-input-pinctrl-pwm-6.18', 'ib-mfd-input-6.18', 'ib-mfd-input-rtc-6.18' and 'ib-mfd-power-regulator-6.18' into ibs-for-mfd-merged

2025-10-01T09:27:35+00:00

mfd: Add max7360 support

2025-09-16T14:24:48+00:00

Add core driver to support MAX7360 i2c chip, multi function device with keypad, GPIO, PWM, GPO and rotary encoder submodules. Signed-off-by: Kamel Bouhara Co-developed-by: Mathieu Dubois-Briand Signed-off-by: Mathieu Dubois-Briand Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-2-435cfda2b1ea@bootlin.com Signed-off-by: Lee Jones

mfd: Add core driver for Nuvoton NCT6694

2025-09-16T13:41:57+00:00

The Nuvoton NCT6694 provides an USB interface to the host to access its features. Sub-devices can use the USB functions nct6694_read_msg() and nct6694_write_msg() to issue a command. They can also request interrupt that will be called when the USB device receives its interrupt pipe. Signed-off-by: Ming Yu Link: https://lore.kernel.org/r/20250912091952.1169369-2-a0282524688@gmail.com Signed-off-by: Lee Jones

iio: adc: Add driver for Marvell 88PM886 PMIC ADC

2025-09-13T13:47:14+00:00

Marvell's 88PM886 PMIC has a so-called General Purpose ADC used for monitoring various system voltages and temperatures. Add the relevant register definitions to the MFD header and a driver for the ADC. Acked-by: Karel Balej # for the PMIC Signed-off-by: Duje Mihanović Signed-off-by: Jonathan Cameron