kernel/linux.git/include/linux/mei_cl_bus.h, branch v6.12.80

mei: docs: fix spelling errors

2023-10-18T08:01:33+00:00

Fix spelling errors in the mei code base. Signed-off-by: Tomas Winkler Reviewed-by: Randy Dunlap Link: https://lore.kernel.org/r/20231011074301.223879-4-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman

mei: bus: add send and recv api with timeout

2023-10-18T08:01:33+00:00

Add variation of the send and recv functions on bus that define timeout. Caller can use such functions in flow that can stuck to bail out and not to put down the whole system. Signed-off-by: Alexander Usyskin Signed-off-by: Alan Previn Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20231011110157.247552-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman

mei: bus: extend bus API to support command streamer API

2022-10-03T18:29:10+00:00

Add mei bus API for sending gsc commands: mei_cldev_send_gsc_command() The GSC commands are originated in the graphics stack and are in form of SGL DMA buffers. The GSC commands are synchronous, the response is received in the same call on the out sg list buffers. The function setups pointers for in and out sg lists in the mei sgl extended header and sends it to the firmware. Signed-off-by: Vitaly Lubart Signed-off-by: Tomas Winkler Signed-off-by: Daniele Ceraolo Spurio Cc: Greg Kroah-Hartman Reviewed-by: Greg Kroah-Hartman Link: https://patchwork.freedesktop.org/patch/msgid/20220928004145.745803-5-daniele.ceraolospurio@intel.com

mei: bus: add client dma interface

2021-11-26T16:31:46+00:00

Expose the client dma mapping via mei client bus interface. The client dma has to be mapped before the device is enabled, therefore we need to create device linking already during mapping and we need to unmap after the client is disable hence we need to postpone the unlink and flush till unmapping or when destroying the device. Signed-off-by: Alexander Usyskin Co-developed-by: Tomas Winkler Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20210420172755.12178-1-emmanuel.grumbach@intel.com Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211112062814.7502-1-emmanuel.grumbach@intel.com

mei: constify passed buffers and structures

2021-07-29T15:08:04+00:00

Buffers and structures passed to MEI bus and client API can be made const for safer code and clear indication that it is not modified. Acked-by: Arnd Bergmann Acked-by: Tomas Winkler Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20210729102803.46289-1-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman

mei: bus: change remove callback to return void

2021-02-09T08:30:16+00:00

The driver core ignores the return value of mei_cl_device_remove() so passing an error value doesn't solve any problem. As most mei drivers' remove callbacks return 0 unconditionally and returning a different value doesn't have any effect, change this prototype to return void and return 0 unconditionally in mei_cl_device_remove(). The only driver that could return an error value is modified to emit an explicit warning in the error case. Acked-by: Guenter Roeck Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210208073705.428185-3-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman

mei: bus: add vtag support

2020-12-07T09:29:57+00:00

Add API to support vtag in communication on mei bus. Add mei_cldev_send_vtag, mei_cldev_recv_vtag and mei_cldev_recv_nonblock_vtag functions to allow sending a message with vtag set and to receive vtag of an incoming message. Cc: Sean Z Huang Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20201116125612.1660971-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman

mei: adjust the copyright notice in the files.

2019-03-27T17:07:54+00:00

Use unified version of the copyright notice in the files Update copyright years according the year the files were touched, except this patch and SPDX conversions. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: bus: export to_mei_cl_device for mei client devices drivers

2019-02-12T09:38:46+00:00

Export to_mei_cl_device macro, as it is needed also in the mei client drivers. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman