kernel/linux.git/include/linux/lsm_audit.h, branch v6.12.80

selinux: log anon inode class name

2022-05-03T20:09:03+00:00

Log the anonymous inode class name in the security hook inode_init_security_anon. This name is the key for name based type transitions on the anon_inode security class on creation. Example: type=AVC msg=audit(02/16/22 22:02:50.585:216) : avc: granted \ { create } for pid=2136 comm=mariadbd anonclass=[io_uring] \ scontext=system_u:system_r:mysqld_t:s0 \ tcontext=system_u:system_r:mysqld_iouring_t:s0 tclass=anon_inode Add a new LSM audit data type holding the inode and the class name. Signed-off-by: Christian Göttsche [PM: adjusted 'anonclass' to be a trusted string, cgzones approved] Signed-off-by: Paul Moore

lsm_audit,selinux: pass IB device name by reference

2021-05-14T20:38:19+00:00

While trying to address a Coverity warning that the dev_name string might end up unterminated when strcpy'ing it in selinux_ib_endport_manage_subnet(), I realized that it is possible (and simpler) to just pass the dev_name pointer directly, rather than copying the string to a buffer. The ibendport variable goes out of scope at the end of the function anyway, so the lifetime of the dev_name pointer will never be shorter than that of ibendport, thus we can safely just pass the dev_name pointer and be done with it. Signed-off-by: Ondrej Mosnacek Acked-by: Richard Guy Briggs Signed-off-by: Paul Moore

security: add const qualifier to struct sock in various places

2020-12-03T20:56:03+00:00

A followup change to tcp_request_sock_op would have to drop the 'const' qualifier from the 'route_req' function as the 'security_inet_conn_request' call is moved there - and that function expects a 'struct sock *'. However, it turns out its also possible to add a const qualifier to security_inet_conn_request instead. Signed-off-by: Florian Westphal Acked-by: James Morris Signed-off-by: Jakub Kicinski

smack: Implement the watch_key and post_notification hooks

2020-05-19T14:47:38+00:00

Implement the watch_key security hook in Smack to make sure that a key grants the caller Read permission in order to set a watch on a key. Also implement the post_notification security hook to make sure that the notification source is granted Write permission by the watch queue. For the moment, the watch_devices security hook is left unimplemented as it's not obvious what the object should be since the queue is global and didn't previously exist. Signed-off-by: David Howells Acked-by: Casey Schaufler

security,lockdown,selinux: implement SELinux lockdown

2019-12-09T22:53:58+00:00

Implement a SELinux hook for lockdown. If the lockdown module is also enabled, then a denial by the lockdown module will take precedence over SELinux, so SELinux can only further restrict lockdown decisions. The SELinux hook only distinguishes at the granularity of integrity versus confidentiality similar to the lockdown module, but includes the full lockdown reason as part of the audit record as a hint in diagnosing what triggered the denial. To support this auditing, move the lockdown_reasons[] string array from being private to the lockdown module to the security framework so that it can be used by the lsm audit code and so that it is always available even when the lockdown module is disabled. Note that the SELinux implementation allows the integrity and confidentiality reasons to be controlled independently from one another. Thus, in an SELinux policy, one could allow operations that specify an integrity reason while blocking operations that specify a confidentiality reason. The SELinux hook implementation is stricter than the lockdown module in validating the provided reason value. Sample AVC audit output from denials: avc: denied { integrity } for pid=3402 comm="fwupd" lockdown_reason="/dev/mem,kmem,port" scontext=system_u:system_r:fwupd_t:s0 tcontext=system_u:system_r:fwupd_t:s0 tclass=lockdown permissive=0 avc: denied { confidentiality } for pid=4628 comm="cp" lockdown_reason="/proc/kcore access" scontext=unconfined_u:unconfined_r:test_lockdown_integrity_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:test_lockdown_integrity_t:s0-s0:c0.c1023 tclass=lockdown permissive=0 Signed-off-by: Stephen Smalley Reviewed-by: James Morris [PM: some merge fuzz do the the perf hooks] Signed-off-by: Paul Moore

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

lsm_audit: update my email address

2017-08-17T19:33:39+00:00

Update my email address since epoch.ncsc.mil no longer exists. MAINTAINERS and CREDITS are already correct. Signed-off-by: Stephen Smalley Signed-off-by: Paul Moore

selinux: Add IB Port SMP access vector

2017-05-23T16:28:02+00:00

Add a type for Infiniband ports and an access vector for subnet management packets. Implement the ib_port_smp hook to check that the caller has permission to send and receive SMPs on the end port specified by the device name and port. Add interface to query the SID for a IB port, which walks the IB_PORT ocontexts to find an entry for the given name and port. Signed-off-by: Daniel Jurgens Reviewed-by: James Morris Acked-by: Doug Ledford Signed-off-by: Paul Moore

selinux: Implement Infiniband PKey "Access" access vector

2017-05-23T16:27:50+00:00

Add a type and access vector for PKeys. Implement the ib_pkey_access hook to check that the caller has permission to access the PKey on the given subnet prefix. Add an interface to get the PKey SID. Walk the PKey ocontexts to find an entry for the given subnet prefix and pkey. Signed-off-by: Daniel Jurgens Reviewed-by: James Morris Acked-by: Doug Ledford Signed-off-by: Paul Moore

lsm,audit,selinux: Introduce a new audit data type LSM_AUDIT_DATA_FILE

2016-09-19T17:42:38+00:00

Right now LSM_AUDIT_DATA_PATH type contains "struct path" in union "u" of common_audit_data. This information is used to print path of file at the same time it is also used to get to dentry and inode. And this inode information is used to get to superblock and device and print device information. This does not work well for layered filesystems like overlay where dentry contained in path is overlay dentry and not the real dentry of underlying file system. That means inode retrieved from dentry is also overlay inode and not the real inode. SELinux helpers like file_path_has_perm() are doing checks on inode retrieved from file_inode(). This returns the real inode and not the overlay inode. That means we are doing check on real inode but for audit purposes we are printing details of overlay inode and that can be confusing while debugging. Hence, introduce a new type LSM_AUDIT_DATA_FILE which carries file information and inode retrieved is real inode using file_inode(). That way right avc denied information is given to user. For example, following is one example avc before the patch. type=AVC msg=audit(1473360868.399:214): avc: denied { read open } for pid=1765 comm="cat" path="/root/.../overlay/container1/merged/readfile" dev="overlay" ino=21443 scontext=unconfined_u:unconfined_r:test_overlay_client_t:s0:c10,c20 tcontext=unconfined_u:object_r:test_overlay_files_ro_t:s0 tclass=file permissive=0 It looks as follows after the patch. type=AVC msg=audit(1473360017.388:282): avc: denied { read open } for pid=2530 comm="cat" path="/root/.../overlay/container1/merged/readfile" dev="dm-0" ino=2377915 scontext=unconfined_u:unconfined_r:test_overlay_client_t:s0:c10,c20 tcontext=unconfined_u:object_r:test_overlay_files_ro_t:s0 tclass=file permissive=0 Notice that now dev information points to "dm-0" device instead of "overlay" device. This makes it clear that check failed on underlying inode and not on the overlay inode. Signed-off-by: Vivek Goyal [PM: slight tweaks to the description to make checkpatch.pl happy] Signed-off-by: Paul Moore