kernel/linux.git/include/linux/libata.h, branch v3.6.8

Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstream

2012-07-25T19:58:48+00:00

Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h

[SCSI] libata, libsas: introduce sched_eh and end_eh port ops

2012-07-20T07:58:45+00:00

When managing shost->host_eh_scheduled libata assumes that there is a 1:1 shost-to-ata_port relationship. libsas creates a 1:N relationship so it needs to manage host_eh_scheduled cumulatively at the host level. The sched_eh and end_eh port port ops allow libsas to track when domain devices enter/leave the "eh-pending" state under ha->lock (previously named ha->state_lock, but it is no longer just a lock for ha->state changes). Since host_eh_scheduled indicates eh without backing commands pinning the device it can be deallocated at any time. Move the taking of the domain_device reference under the port_lock to guarantee that the ata_port stays around for the duration of eh. Reviewed-by: Jacek Danecki Acked-by: Jeff Garzik Signed-off-by: Dan Williams Signed-off-by: James Bottomley

libata: detect Device Attention support

2012-06-29T15:38:17+00:00

Add a new flag ATA_DFLAG_DA to indicate that device supports "Device Attention". Acked-by: Aaron Lu Signed-off-by: Lin Ming Signed-off-by: Jeff Garzik

libata: migrate ACPI code over to new bindings

2012-06-29T15:38:11+00:00

Now that we have the ability to directly glue the ACPI namespace to the driver model in libata, we don't need the custom code to handle the same thing. Remove it and migrate the functions over to the new code. Signed-off-by: Matthew Garrett Signed-off-by: Holger Macht Signed-off-by: Lin Ming Signed-off-by: Jeff Garzik

libata: add a host flag to ignore detected ATA devices

2012-05-07T19:32:23+00:00

Where devices are visible via more than one host we sometimes wish to indicate that cirtain devices should be ignored on a specific host. Add a host flag indicating that this host wishes to ignore ATA specific devices. Signed-off-by: Andy Whitcroft Signed-off-by: Jeff Garzik

[SCSI] libsas, libata: fix start of life for a sas ata_port

2012-04-23T11:11:47+00:00

This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [] sas_ata_end_eh+0x12/0x5e [libsas] ... [] sas_unregister_common_dev+0x78/0xc9 [libsas] [] sas_unregister_dev+0x4f/0xad [libsas] [] sas_unregister_domain_devices+0x7f/0xbf [libsas] [] sas_deform_port+0x61/0x1b8 [libsas] [] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski Signed-off-by: Dan Williams Acked-by: Jeff Garzik Signed-off-by: James Bottomley

[SCSI] libsas: async ata scanning

2012-02-29T21:35:41+00:00

libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang Acked-by: Jeff Garzik Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] libsas: execute transport link resets with libata-eh via host workqueue

2012-02-19T20:13:51+00:00

Link resets leave ata affiliations intact, so arrange for libsas to make an effort to avoid dropping the device due to a slow-to-recover link. Towards this end carry out reset in the host workqueue so that it can check for ata devices and kick the reset request to libata. Hard resets, in contrast, bypass libata since they are meant for associating an ata device with another initiator in the domain (tears down affiliations). Need to add a new transport_sas_phy_reset() since the current sas_phy_reset() is a utility function to libsas lldds. They are not prepared for it to loop back into eh. Signed-off-by: Dan Williams Signed-off-by: James Bottomley

treewide: use printf not attribute__((format(printf,...)))

2011-11-01T00:30:54+00:00

Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*$\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*$\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches Cc: "Kirill A. Shutemov" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[SCSI] libsas,libata: fix ->change_queue_{depth|type} for sata devices

2011-10-02T17:30:30+00:00

Pass queue_depth change requests to libata, and prevent queue_type changes for ATA devices. Otherwise: 1/ we do not honor the libata specific restrictions on the queue depth 2/ libsas drivers that do not set sdev->tagged_supported are unable to change the queue_depth of ata devices via sysfs Signed-off-by: Dan Williams Acked-by: Jeff Garzik Signed-off-by: James Bottomley