kernel/linux.git/include/linux/libata.h, branch v3.13-rc5

libata: Add support for queued DSM TRIM

2013-08-25T13:39:12+00:00

Some new SSDs support the queued version of the DSM TRIM command. Let the driver use the new command if supported. Signed-off-by: Marc Carino Signed-off-by: Tejun Heo

libata: Add support for SEND/RECEIVE FPDMA QUEUED

2013-08-25T13:39:12+00:00

Add support for the following ATA opcodes, which are present in SATA 3.1 and T13 ATA ACS-3: SEND FPDMA QUEUED RECEIVE FPDMA QUEUED Signed-off-by: Marc Carino Signed-off-by: Tejun Heo

libata: Add H2D FIS "auxiliary" port flag

2013-08-25T13:39:12+00:00

Add a new port flag, ATA_FLAG_FPDMA_AUX, used to indicate support for transmission of the H2D FIS 'auxiliary' field. Signed-off-by: Marc Carino Signed-off-by: Tejun Heo

libata: Populate host-to-device FIS "auxiliary" field

2013-08-25T13:39:11+00:00

SATA 3.1 added an "auxiliary" field to the host-to-device FIS. Populate the host-to-device FIS with the new field via the taskfile struct. Signed-off-by: Marc Carino Signed-off-by: Tejun Heo

ata: acpi: rework the ata acpi bind support

2013-08-23T16:09:23+00:00

Binding ACPI handle to SCSI device has several drawbacks, namely: 1 During ATA device initialization time, ACPI handle will be needed while SCSI devices are not created yet. So each time ACPI handle is needed, instead of retrieving the handle by ACPI_HANDLE macro, a namespace scan is performed to find the handle for the corresponding ATA device. This is inefficient, and also expose a restriction on calling path not holding any lock. 2 The binding to SCSI device tree makes code complex, while at the same time doesn't bring us any benefit. All ACPI handlings are still done in ATA module, not in SCSI. Rework the ATA ACPI binding code to bind ACPI handle to ATA transport devices(ATA port and ATA device). The binding needs to be done only once, since the ATA transport devices do not go away with hotplug. And due to this, the flush_work call in hotplug handler for ATA bay is no longer needed. Tested on an Intel test platform for binding and runtime power off for ODD(ZPODD) and hard disk; on an ASUS S400C for binding and normal boot and S3, where its SATA port node has _SDD and _GTF control methods when configured as an AHCI controller and its PATA device node has _GTF control method when configured as an IDE controller. SATA PMP binding and ATA hotplug is not tested. Signed-off-by: Aaron Lu Tested-by: Dirk Griesbach Signed-off-by: Tejun Heo

libata: move 'struct ata_taskfile' and friends from ata.h to libata.h

2013-07-16T11:46:56+00:00

Move 'struct ata_taskfile', ata_prot_flags() and their friends from to . They were misplaced from the beginning, as should cover ATA/ATAPI and related standards only -- to which the aforementioned structure and function have only remote relation. I would have moved 'enum ata_tf_protocols' closely related to 'struct ata_taskfile' but it unfortunately gets used by 'drivers/ide/ide-ioctls.c'... Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo

ahci: make ahci_transmit_led_message into a function pointer

2013-06-06T21:05:23+00:00

Create a new ata_port_operations function pointer called transmit_led_message and give it the default value of ahci_transmit_led_message. This allows AHCI controllers with non-standard LED interfaces to use the existing em_ interface. Signed-off-by: Mark Langsdorf Signed-off-by: Tejun Heo

libata: Add atapi_dmadir force flag

2013-05-21T23:34:34+00:00

Some device require DMADIR to be enabled, but are not detected as such by atapi_id_dmadir. One such example is "Asus Serillel 2" SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR, even if the bridged device does not. As atapi_dmadir module parameter can cause problems with some devices (as per Tejun Heo's memory), enabling it globally may not be possible depending on the hardware. This patch adds atapi_dmadir in the form of a "force" horkage value, allowing global, per-bus and per-device control. Signed-off-by: Vincent Pelletier Signed-off-by: Tejun Heo

libata: export ata_port port_no attribute via /sys

2013-05-14T18:44:07+00:00

While registering host controller track port number based upon number of ports available on the controller, export port_no attribute through /sys. This patch is needed by udev for composing persistent links in /dev/disk/by-path. /sys/devices/pci0000:00/0000:00:1f.2/ata8/ata_port/ata8 total 0 lrwxrwxrwx. 1 root root 0 Mar 6 12:43 device -> ../../../ata8 -r--r--r--. 1 root root 4096 Mar 6 12:43 idle_irq -r--r--r--. 1 root root 4096 Mar 6 12:43 nr_pmp_links -r--r--r--. 1 root root 4096 Mar 6 12:43 port_no drwxr-xr-x. 2 root root 0 Mar 6 12:42 power lrwxrwxrwx. 1 root root 0 Mar 6 12:41 subsystem -> ../../../../../../class/ata_port -rw-r--r--. 1 root root 4096 Mar 6 12:40 uevent 1 Signed-off-by: David Milburn Signed-off-by: Tejun Heo

libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive

2013-04-03T23:33:43+00:00

The Slimtype DVD A DS8A8SH drive locks up when max sector is smaller than 65535, and the blow backtrace is observed on locking up: INFO: task flush-8:32:1130 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-8:32 D ffffffff8180cf60 0 1130 2 0x00000000 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000 Call Trace: [] schedule+0x5d/0x70 [] io_schedule+0x8c/0xd0 [] get_request+0x731/0x7d0 [] ? cfq_allow_merge+0x50/0x90 [] ? wake_up_bit+0x40/0x40 [] ? bio_attempt_back_merge+0x33/0x110 [] blk_queue_bio+0x23a/0x3f0 [] generic_make_request+0xc6/0x120 [] submit_bio+0x138/0x160 [] ? bio_alloc_bioset+0x96/0x120 [] submit_bh+0x1f1/0x220 [] __block_write_full_page+0x228/0x340 [] ? attach_nobh_buffers+0xc0/0xc0 [] ? I_BDEV+0x10/0x10 [] ? I_BDEV+0x10/0x10 [] block_write_full_page_endio+0xe6/0x100 [] block_write_full_page+0x15/0x20 [] blkdev_writepage+0x18/0x20 [] __writepage+0x17/0x40 [] write_cache_pages+0x34a/0x4a0 [] ? set_page_dirty+0x70/0x70 [] generic_writepages+0x51/0x80 [] do_writepages+0x20/0x50 [] __writeback_single_inode+0xa6/0x2b0 [] writeback_sb_inodes+0x311/0x4d0 [] __writeback_inodes_wb+0x86/0xd0 [] wb_writeback+0x1a3/0x330 [] ? _raw_spin_lock_irqsave+0x3f/0x50 [] ? get_nr_inodes+0x52/0x70 [] wb_do_writeback+0x1dc/0x260 [] ? schedule_timeout+0x204/0x240 [] bdi_writeback_thread+0x102/0x2b0 [] ? wb_do_writeback+0x260/0x260 [] kthread+0xc0/0xd0 [] ? kthread_worker_fn+0x1b0/0x1b0 [] ret_from_fork+0x7c/0xb0 [] ? kthread_worker_fn+0x1b0/0x1b0 The above trace was triggered by "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768" It was previously working by accident, since another bug introduced by 4dce8ba94c7 (libata: Use 'bool' return value for ata_id_XXX) caused all drives to use maxsect=65535. Cc: stable@vger.kernel.org Signed-off-by: Shan Hai Signed-off-by: Jeff Garzik