kernel/linux.git/include/linux/kdb.h, branch v6.6.132

kdb: move kdb_send_sig() declaration to a better header file

2023-07-03T08:27:12+00:00

kdb_send_sig() is defined in the signal code and called from kdb, but the declaration is part of the kdb internal code. Move the declaration to the shared header to avoid the warning: kernel/signal.c:4789:6: error: no previous prototype for 'kdb_send_sig' [-Werror=missing-prototypes] Reported-by: Arnd Bergmann Closes: https://lore.kernel.org/lkml/20230517125423.930967-1-arnd@kernel.org/ Signed-off-by: Daniel Thompson Link: https://lore.kernel.org/r/20230630201206.2396930-1-daniel.thompson@linaro.org

module: Move kdb module related code out of main kdb code

2022-04-05T15:43:04+00:00

No functional change. This patch migrates the kdb 'lsmod' command support out of main kdb code into its own file under kernel/module. In addition to the above, a minor style warning i.e. missing a blank line after declarations, was resolved too. The new file was added to MAINTAINERS. Finally we remove linux/module.h as it is entirely redundant. Reviewed-by: Daniel Thompson Acked-by: Daniel Thompson Signed-off-by: Aaron Tomlin Signed-off-by: Luis Chamberlain

kdb: Rename members of struct kdbtab_t

2021-07-27T16:05:06+00:00

Remove redundant prefix "cmd_" from name of members in struct kdbtab_t for better readibility. Suggested-by: Doug Anderson Signed-off-by: Sumit Garg Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20210712134620.276667-5-sumit.garg@linaro.org Signed-off-by: Daniel Thompson

kdb: Get rid of redundant kdb_register_flags()

2021-07-27T16:03:16+00:00

Commit e4f291b3f7bb ("kdb: Simplify kdb commands registration") allowed registration of pre-allocated kdb commands with pointer to struct kdbtab_t. Lets switch other users as well to register pre- allocated kdb commands via: - Changing prototype for kdb_register() to pass a pointer to struct kdbtab_t instead. - Embed kdbtab_t structure in kdb_macro_t rather than individual params. With these changes kdb_register_flags() becomes redundant and hence removed. Also, since we have switched all users to register pre-allocated commands, "is_dynamic" flag in struct kdbtab_t becomes redundant and hence removed as well. Suggested-by: Daniel Thompson Signed-off-by: Sumit Garg Acked-by: Steven Rostedt (VMware) Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20210712134620.276667-3-sumit.garg@linaro.org Signed-off-by: Daniel Thompson

kdb: Remove the misfeature 'KDBFLAGS'

2020-06-02T14:15:46+00:00

Currently, 'KDBFLAGS' is an internal variable of kdb, it is combined by 'KDBDEBUG' and state flags. It will be shown only when 'KDBDEBUG' is set, and the user can define an environment variable named 'KDBFLAGS' too. These are puzzling indeed. After communication with Daniel, it seems that 'KDBFLAGS' is a misfeature. So let's replace 'KDBFLAGS' with 'KDBDEBUG' to just show the value we wrote into. After this modification, we can use `md4c1 kdb_flags` instead, to observe the state flags. Suggested-by: Daniel Thompson Signed-off-by: Wei Li Link: https://lore.kernel.org/r/20200521072125.21103-1-liwei391@huawei.com [daniel.thompson@linaro.org: Make kdb_flags unsigned to avoid arithmetic right shift] Signed-off-by: Daniel Thompson

kdb: kdb_current_regs should be private

2020-01-31T17:33:54+00:00

As of the patch ("MIPS: kdb: Remove old workaround for backtracing on other CPUs") there is no reason for kdb_current_regs to be in the public "kdb.h". Let's move it next to kdb_current_task. Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20191109111623.2.Iadbfb484e90b557cc4b5ac9890bfca732cd99d77@changeid Signed-off-by: Daniel Thompson

kdb: call vkdb_printf() from vprintk_default() only when wanted

2016-12-15T00:04:08+00:00

kdb_trap_printk allows to pass normal printk() messages to kdb via vkdb_printk(). For example, it is used to get backtrace using the classic show_stack(), see kdb_show_stack(). vkdb_printf() tries to avoid a potential infinite loop by disabling the trap. But this approach is racy, for example: CPU1 CPU2 vkdb_printf() // assume that kdb_trap_printk == 0 saved_trap_printk = kdb_trap_printk; kdb_trap_printk = 0; kdb_show_stack() kdb_trap_printk++; Problem1: Now, a nested printk() on CPU0 calls vkdb_printf() even when it should have been disabled. It will not cause a deadlock but... // using the outdated saved value: 0 kdb_trap_printk = saved_trap_printk; kdb_trap_printk--; Problem2: Now, kdb_trap_printk == -1 and will stay like this. It means that all messages will get passed to kdb from now on. This patch removes the racy saved_trap_printk handling. Instead, the recursion is prevented by a check for the locked CPU. The solution is still kind of racy. A non-related printk(), from another process, might get trapped by vkdb_printf(). And the wanted printk() might not get trapped because kdb_printf_cpu is assigned. But this problem existed even with the original code. A proper solution would be to get_cpu() before setting kdb_trap_printk and trap messages only from this CPU. I am not sure if it is worth the effort, though. In fact, the race is very theoretical. When kdb is running any of the commands that use kdb_trap_printk there is a single active CPU and the other CPUs should be in a holding pen inside kgdb_cpu_enter(). The only time this is violated is when there is a timeout waiting for the other CPUs to report to the holding pen. Finally, note that the situation is a bit schizophrenic. vkdb_printf() explicitly allows recursion but only from KDB code that calls kdb_printf() directly. On the other hand, the generic printk() recursion is not allowed because it might cause an infinite loop. This is why we could not hide the decision inside vkdb_printf() easily. Link: http://lkml.kernel.org/r/1480412276-16690-4-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek Cc: Daniel Thompson Cc: Jason Wessel Cc: Peter Zijlstra Cc: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kdb: remove unused kdb_event handling

2016-12-15T00:04:08+00:00

kdb_event state variable is only set but never checked in the kernel code. http://www.spinics.net/lists/kdb/msg01733.html suggests that this variable affected WARN_CONSOLE_UNLOCKED() in the original implementation. But this check never went upstream. The semantic is unclear and racy. The value is updated after the kdb_printf_lock is acquired and after it is released. It should be symmetric at minimum. The value should be manipulated either inside or outside the locked area. Fortunately, it seems that the original function is gone and we could simply remove the state variable. Link: http://lkml.kernel.org/r/1480412276-16690-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek Suggested-by: Daniel Thompson Cc: Jason Wessel Cc: Peter Zijlstra Cc: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kdb: use task_cpu() instead of task_thread_info()->cpu

2016-07-28T23:07:41+00:00

We'll need this cleanup to make the cpu field in thread_info be optional. Link: http://lkml.kernel.org/r/da298328dc77ea494576c2f20a934218e758a6fa.1468523549.git.luto@kernel.org Signed-off-by: Andy Lutomirski Cc: Jason Wessel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kdb: Avoid printing KERN_ levels to consoles

2015-02-19T18:39:02+00:00

Currently when kdb traps printk messages then the raw log level prefix (consisting of '\001' followed by a numeral) does not get stripped off before the message is issued to the various I/O handlers supported by kdb. This causes annoying visual noise as well as causing problems grepping for ^. It is also a change of behaviour compared to normal usage of printk() usage. For example -h ends up with different output to that of kdb's "sr h". This patch addresses the problem by stripping log levels from messages before they are issued to the I/O handlers. printk() which can also act as an i/o handler in some cases is special cased; if the caller provided a log level then the prefix will be preserved when sent to printk(). The addition of non-printable characters to the output of kdb commands is a regression, albeit and extremely elderly one, introduced by commit 04d2c8c83d0e ("printk: convert the format for KERN_ to a 2 byte pattern"). Note also that this patch does *not* restore the original behaviour from v3.5. Instead it makes printk() from within a kdb command display the message without any prefix (i.e. like printk() normally does). Signed-off-by: Daniel Thompson Cc: Joe Perches Cc: stable@vger.kernel.org Signed-off-by: Jason Wessel