kernel/linux.git/include/linux/kasan.h, branch v6.6.132

kasan: refactor pcpu kasan vmalloc unpoison

2026-01-11T14:22:17+00:00

commit 6f13db031e27e88213381039032a9cc061578ea6 upstream. A KASAN tag mismatch, possibly causing a kernel panic, can be observed on systems with a tag-based KASAN enabled and with multiple NUMA nodes. It was reported on arm64 and reproduced on x86. It can be explained in the following points: 1. There can be more than one virtual memory chunk. 2. Chunk's base address has a tag. 3. The base address points at the first chunk and thus inherits the tag of the first chunk. 4. The subsequent chunks will be accessed with the tag from the first chunk. 5. Thus, the subsequent chunks need to have their tag set to match that of the first chunk. Refactor code by reusing __kasan_unpoison_vmalloc in a new helper in preparation for the actual fix. Link: https://lkml.kernel.org/r/eb61d93b907e262eefcaa130261a08bcb6c5ce51.1764874575.git.m.wieczorretman@pm.me Fixes: 1d96320f8d53 ("kasan, vmalloc: add vmalloc tagging for SW_TAGS") Signed-off-by: Maciej Wieczor-Retman Reviewed-by: Andrey Konovalov Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Danilo Krummrich Cc: Dmitriy Vyukov Cc: Jiayuan Chen Cc: Kees Cook Cc: Marco Elver Cc: "Uladzislau Rezki (Sony)" Cc: Vincenzo Frascino Cc: [6.1+] Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

kasan: disable kasan_non_canonical_hook() for HW tags

2023-10-18T19:12:41+00:00

On arm64, building with CONFIG_KASAN_HW_TAGS now causes a compile-time error: mm/kasan/report.c: In function 'kasan_non_canonical_hook': mm/kasan/report.c:637:20: error: 'KASAN_SHADOW_OFFSET' undeclared (first use in this function) 637 | if (addr < KASAN_SHADOW_OFFSET) | ^~~~~~~~~~~~~~~~~~~ mm/kasan/report.c:637:20: note: each undeclared identifier is reported only once for each function it appears in mm/kasan/report.c:640:77: error: expected expression before ';' token 640 | orig_addr = (addr - KASAN_SHADOW_OFFSET) << KASAN_SHADOW_SCALE_SHIFT; This was caused by removing the dependency on CONFIG_KASAN_INLINE that used to prevent this from happening. Use the more specific dependency on KASAN_SW_TAGS || KASAN_GENERIC to only ignore the function for hwasan mode. Link: https://lkml.kernel.org/r/20231016200925.984439-1-arnd@kernel.org Fixes: 12ec6a919b0f ("kasan: print the original fault addr when access invalid shadow") Signed-off-by: Arnd Bergmann Cc: Alexander Potapenko Cc: Andrey Konovalov Cc: Andrey Ryabinin Cc: Dmitry Vyukov Cc: Haibo Li Cc: Kees Cook Cc: Vincenzo Frascino Cc: AngeloGioacchino Del Regno Cc: Matthias Brugger Signed-off-by: Andrew Morton

kasan: print the original fault addr when access invalid shadow

2023-10-18T19:12:41+00:00

when the checked address is illegal,the corresponding shadow address from kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow address causes kernel oops. Here is a sample about oops on arm64(VA 39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on: [ffffffb80aaaaaaa] pgd=000000005d3ce003, p4d=000000005d3ce003, pud=000000005d3ce003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __hwasan_load8_noabort+0x5c/0x90 lr : do_ib_ob+0xf4/0x110 ffffffb80aaaaaaa is the shadow address for efffff80aaaaaaaa. The problem is reading invalid shadow in kasan_check_range. The generic kasan also has similar oops. It only reports the shadow address which causes oops but not the original address. Commit 2f004eea0fc8("x86/kasan: Print original address on #GP") introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE. This patch extends it to KASAN_OUTLINE mode. Link: https://lkml.kernel.org/r/20231009073748.159228-1-haibo.li@mediatek.com Fixes: 2f004eea0fc8("x86/kasan: Print original address on #GP") Signed-off-by: Haibo Li Reviewed-by: Andrey Konovalov Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: AngeloGioacchino Del Regno Cc: Dmitry Vyukov Cc: Haibo Li Cc: Matthias Brugger Cc: Vincenzo Frascino Cc: Arnd Bergmann Cc: Kees Cook Signed-off-by: Andrew Morton

kasan: Cleanup the __HAVE_ARCH_SHADOW_MAP usage

2023-09-20T06:26:29+00:00

As Linus suggested, __HAVE_ARCH_XYZ is "stupid" and "having historical uses of it doesn't make it good". So migrate __HAVE_ARCH_SHADOW_MAP to separate macros named after the respective functions. Suggested-by: Linus Torvalds Reviewed-by: WANG Xuerui Reviewed-by: Andrey Konovalov Signed-off-by: Huacai Chen

kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping

2023-09-06T14:54:16+00:00

MIPS, LoongArch and some other architectures have many holes between different segments and the valid address space (256T available) is insufficient to map all these segments to kasan shadow memory with the common formula provided by kasan core. So we need architecture specific mapping formulas to ensure different segments are mapped individually, and only limited space lengths of those specific segments are mapped to shadow. Therefore, when the incoming address is converted to a shadow, we need to add a condition to determine whether it is valid. Reviewed-by: Andrey Konovalov Signed-off-by: Qing Zhang Signed-off-by: Huacai Chen

kasan: use internal prototypes matching gcc-13 builtins

2023-06-09T23:25:19+00:00

gcc-13 warns about function definitions for builtin interfaces that have a different prototype, e.g.: In file included from kasan_test.c:31: kasan.h:574:6: error: conflicting types for built-in function '__asan_register_globals'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch] 574 | void __asan_register_globals(struct kasan_global *globals, size_t size); kasan.h:577:6: error: conflicting types for built-in function '__asan_alloca_poison'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch] 577 | void __asan_alloca_poison(unsigned long addr, size_t size); kasan.h:580:6: error: conflicting types for built-in function '__asan_load1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch] 580 | void __asan_load1(unsigned long addr); kasan.h:581:6: error: conflicting types for built-in function '__asan_store1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch] 581 | void __asan_store1(unsigned long addr); kasan.h:643:6: error: conflicting types for built-in function '__hwasan_tag_memory'; expected 'void(void *, unsigned char, long int)' [-Werror=builtin-declaration-mismatch] 643 | void __hwasan_tag_memory(unsigned long addr, u8 tag, unsigned long size); The two problems are: - Addresses are passes as 'unsigned long' in the kernel, but gcc-13 expects a 'void *'. - sizes meant to use a signed ssize_t rather than size_t. Change all the prototypes to match these. Using 'void *' consistently for addresses gets rid of a couple of type casts, so push that down to the leaf functions where possible. This now passes all randconfig builds on arm, arm64 and x86, but I have not tested it on the other architectures that support kasan, since they tend to fail randconfig builds in other ways. This might fail if any of the 32-bit architectures expect a 'long' instead of 'int' for the size argument. The __asan_allocas_unpoison() function prototype is somewhat weird, since it uses a pointer for 'stack_top' and an size_t for 'stack_bottom'. This looks like it is meant to be 'addr' and 'size' like the others, but the implementation clearly treats them as 'top' and 'bottom'. Link: https://lkml.kernel.org/r/20230509145735.9263-2-arnd@kernel.org Signed-off-by: Arnd Bergmann Cc: Alexander Potapenko Cc: Andrey Konovalov Cc: Andrey Ryabinin Cc: Dmitry Vyukov Cc: Marco Elver Cc: Vincenzo Frascino Cc: Signed-off-by: Andrew Morton

mm/kasan: simplify and refine kasan_cache code

2023-01-19T01:12:55+00:00

struct 'kasan_cache' has a member 'is_kmalloc' indicating whether its host kmem_cache is a kmalloc cache. With newly introduced is_kmalloc_cache() helper, 'is_kmalloc' and its related function can be replaced and removed. Also 'kasan_cache' is only needed by KASAN generic mode, and not by SW/HW tag modes, so refine its protection macro accordingly, suggested by Andrey Konoval. Link: https://lkml.kernel.org/r/20230104060605.930910-2-feng.tang@intel.com Signed-off-by: Feng Tang Reviewed-by: Andrey Konovalov Acked-by: Vlastimil Babka Acked-by: David Rientjes Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Christoph Lameter Cc: Dmitry Vyukov Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim Cc: Pekka Enberg Cc: Roman Gushchin Cc: Vincenzo Frascino Signed-off-by: Andrew Morton

kasan: allow sampling page_alloc allocations for HW_TAGS

2023-01-19T01:12:45+00:00

As Hardware Tag-Based KASAN is intended to be used in production, its performance impact is crucial. As page_alloc allocations tend to be big, tagging and checking all such allocations can introduce a significant slowdown. Add two new boot parameters that allow to alleviate that slowdown: - kasan.page_alloc.sample, which makes Hardware Tag-Based KASAN tag only every Nth page_alloc allocation with the order configured by the second added parameter (default: tag every such allocation). - kasan.page_alloc.sample.order, which makes sampling enabled by the first parameter only affect page_alloc allocations with the order equal or greater than the specified value (default: 3, see below). The exact performance improvement caused by using the new parameters depends on their values and the applied workload. The chosen default value for kasan.page_alloc.sample.order is 3, which matches both PAGE_ALLOC_COSTLY_ORDER and SKB_FRAG_PAGE_ORDER. This is done for two reasons: 1. PAGE_ALLOC_COSTLY_ORDER is "the order at which allocations are deemed costly to service", which corresponds to the idea that only large and thus costly allocations are supposed to sampled. 2. One of the workloads targeted by this patch is a benchmark that sends a large amount of data over a local loopback connection. Most multi-page data allocations in the networking subsystem have the order of SKB_FRAG_PAGE_ORDER (or PAGE_ALLOC_COSTLY_ORDER). When running a local loopback test on a testing MTE-enabled device in sync mode, enabling Hardware Tag-Based KASAN introduces a ~50% slowdown. Applying this patch and setting kasan.page_alloc.sampling to a value higher than 1 allows to lower the slowdown. The performance improvement saturates around the sampling interval value of 10 with the default sampling page order of 3. This lowers the slowdown to ~20%. The slowdown in real scenarios involving the network will likely be better. Enabling page_alloc sampling has a downside: KASAN misses bad accesses to a page_alloc allocation that has not been tagged. This lowers the value of KASAN as a security mitigation. However, based on measuring the number of page_alloc allocations of different orders during boot in a test build, sampling with the default kasan.page_alloc.sample.order value affects only ~7% of allocations. The rest ~93% of allocations are still checked deterministically. Link: https://lkml.kernel.org/r/129da0614123bb85ed4dd61ae30842b2dd7c903f.1671471846.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Reviewed-by: Marco Elver Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Dmitry Vyukov Cc: Evgenii Stepanov Cc: Jann Horn Cc: Mark Brand Cc: Peter Collingbourne Signed-off-by: Andrew Morton

mm: kasan: Extend kasan_metadata_size() to also cover in-object size

2022-11-10T15:27:46+00:00

When kasan is enabled for slab/slub, it may save kasan' free_meta data in the former part of slab object data area in slab object's free path, which works fine. There is ongoing effort to extend slub's debug function which will redzone the latter part of kmalloc object area, and when both of the debug are enabled, there is possible conflict, especially when the kmalloc object has small size, as caught by 0Day bot [1]. To solve it, slub code needs to know the in-object kasan's meta data size. Currently, there is existing kasan_metadata_size() which returns the kasan's metadata size inside slub's metadata area, so extend it to also cover the in-object meta size by adding a boolean flag 'in_object'. There is no functional change to existing code logic. [1]. https://lore.kernel.org/lkml/YuYm3dWwpZwH58Hu@xsang-OptiPlex-9020/ Reported-by: kernel test robot Suggested-by: Andrey Konovalov Signed-off-by: Feng Tang Reviewed-by: Andrey Konovalov Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: Vincenzo Frascino Signed-off-by: Vlastimil Babka

kasan: only define kasan_cache_create for Generic mode

2022-10-03T21:02:59+00:00

Right now, kasan_cache_create() assigns SLAB_KASAN for all KASAN modes and then sets up metadata-related cache parameters for the Generic mode. SLAB_KASAN is used in two places: 1. In slab_ksize() to account for per-object metadata when calculating the size of the accessible memory within the object. 2. In slab_common.c via kasan_never_merge() to prevent merging of caches with per-object metadata. Both cases are only relevant when per-object metadata is present, which is only the case with the Generic mode. Thus, assign SLAB_KASAN and define kasan_cache_create() only for the Generic mode. Also update the SLAB_KASAN-related comment. Link: https://lkml.kernel.org/r/61faa2aa1906e2d02c97d00ddf99ce8911dda095.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Reviewed-by: Marco Elver Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Dmitry Vyukov Cc: Evgenii Stepanov Cc: Peter Collingbourne Signed-off-by: Andrew Morton