kernel/linux.git/include/linux/irqdomain.h, branch v6.1.168

irqdomain: Let irq_domain_set_{info,hwirq_and_chip} take a const irq_chip

2022-02-15T11:10:21+00:00

In order to let a const irqchip be fed to the irqchip layer, adjust the various prototypes. An extra cast in irq_domain_set_hwirq_and_chip() is required to avoid a warning. Signed-off-by: Marc Zyngier Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20220209162607.1118325-2-maz@kernel.org

genirq: Allow the PM device to originate from irq domain

2022-02-09T13:35:56+00:00

As a preparation to moving the reference to the device used for runtime power management, add a new 'dev' field to the irqdomain structure for that exact purpose. The irq_chip_pm_{get,put}() helpers are made aware of the dual location via a new private helper. No functional change intended. Signed-off-by: Marc Zyngier Reviewed-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Tested-by: Tony Lindgren Acked-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20220201120310.878267-2-maz@kernel.org

genirq/generic_chip: Constify irq_generic_chip_ops

2021-11-30T23:15:07+00:00

The only usage of irq_generic_chip_ops is to pass its address to irq_domain_add_linear() which takes a pointer to const struct irq_domain_ops. Make it const to allow the compiler to put it in read-only memory. [ tglx: Fixed subject prefix ] Signed-off-by: Rikard Falkeborn Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20211130214043.1257585-1-rikard.falkeborn@gmail.com

Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2021-11-06T21:36:12+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...

irqdomain: Make of_phandle_args_to_fwspec() generally available

2021-11-04T19:14:24+00:00

of_phandle_args_to_fwspec() can be generally useful to code extracting a DT of_phandle and using an irq_fwspec to use the hierarchical irqdomain API. Make it visible to the rest of the kernel, including modules. Link: https://lore.kernel.org/r/20210929163847.2807812-2-maz@kernel.org Tested-by: Alyssa Rosenzweig Signed-off-by: Marc Zyngier Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas

irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent

2021-09-22T13:29:32+00:00

The 'size' is used in struct_size(domain, revmap, size) and its input parameter type is 'size_t'(unsigned int). Changing the size to 'unsigned int' to make the type consistent. Signed-off-by: Bixuan Cui Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210916025203.44841-1-cuibixuan@huawei.com

irqdomain: Introduce irq_resolve_mapping()

2021-06-10T12:09:18+00:00

Rework irq_find_mapping() to return an both an irq_desc pointer, optionally the virtual irq number, and rename the result to __irq_resolve_mapping(). a new helper called irq_resolve_mapping() is provided for code that doesn't need the virtual irq number. irq_find_mapping() is also rewritten in terms of __irq_resolve_mapping(). Signed-off-by: Marc Zyngier

irqdomain: Protect the linear revmap with RCU

2021-06-10T12:09:18+00:00

It is pretty odd that the radix tree uses RCU while the linear portion doesn't, leading to potential surprises for the users, depending on how the irqdomain has been created. Fix this by moving the update of the linear revmap under the mutex, and the lookup under the RCU read-side lock. The mutex name is updated to reflect that it doesn't only cover the radix-tree anymore. Signed-off-by: Marc Zyngier

irqdomain: Cache irq_data instead of a virq number in the revmap

2021-06-10T12:09:18+00:00

Caching a virq number in the revmap is pretty inefficient, as it means we will need to convert it back to either an irq_data or irq_desc to do anything with it. It is also a bit odd, as the radix tree does cache irq_data pointers. Change the revmap type to be an irq_data pointer instead of an unsigned int, and preserve the current API for now. Signed-off-by: Marc Zyngier

irqdomain: Make normal and nomap irqdomains exclusive

2021-06-10T12:09:17+00:00

Direct mappings are completely exclusive of normal mappings, meaning that we can refactor the code slightly so that we can get rid of the revmap_direct_max_irq field and use the revmap_size field instead, reducing the size of the irqdomain structure. Signed-off-by: Marc Zyngier