kernel/linux.git/include/linux/irqchip, branch v3.13-rc5

Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

2013-11-13T23:51:29+00:00

Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...

irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro

2013-11-07T09:37:37+00:00

This patch converts irq-bcm2835 driver to use the new IRQCHIP_DECLARE and irqchip_init. Signed-off-by: Axel Lin Tested-by: Stephen Warren Cc: Simon Arlott Cc: Olof Johansson Cc: Arnd Bergmann Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Thomas Gleixner

ARM: GIC: interface to send a SGI directly

2013-09-23T22:47:28+00:00

The regular gic_raise_softirq() takes as input a CPU mask which is not adequate when we need to send an IPI to a CPU which is not represented in the kernel to GIC mapping. That is the case with the b.L switcher when GIC migration to the inbound CPU has not yet occurred. Signed-off-by: Nicolas Pitre

ARM: GIC: function to retrieve the physical address of the SGIR

2013-09-23T22:47:28+00:00

In order to have early assembly code signal other CPUs in the system, we need to get the physical address for the SGIR register used to send IPIs. Because the register will be used with a precomputed CPU interface ID number, there is no need for any locking in the assembly code where this register is written to. Signed-off-by: Nicolas Pitre

Merge branch 'iks_for_rmk' of git://git.linaro.org/people/nico/linux into devel-stable

2013-09-17T14:14:07+00:00

Nicolas Pitre writes: This is the first part of the patch series adding IKS (In-Kernel Switcher) support for big.LITTLE system architectures. This consists of the core patches only. Extra patches to come later will introduce various optimizations and tracing support. Those patches were posted on the list a while ago here: http://news.gmane.org/group/gmane.linux.ports.arm.kernel/thread=253942

Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-09-09T23:35:29+00:00

Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: dts: vexpress: Add CCI node to TC2 device-tree ARM: EXYNOS: Skip C1 cpuidle state for exynos5440 ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 ARM: highbank: clean-up some unused includes ARM: sun7i: Enable the A20 clocks in the DTSI ARM: sun6i: Enable clock support in the DTSI ARM: sun5i: dt: Use the A10s gates in the DTSI ARM: at91: at91_dt_defconfig: enable rm9200 support ARM: dts: add ADC device tree node for exynos5420/5250 ARM: dts: Add RTC DT node to Exynos5420 SoC ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC ARM: dts: Fix the RTC DT node name for Exynos5250 irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ...

drivers: irq-chip: irq-gic: introduce gic_cpu_if_down()

2013-08-28T18:28:43+00:00

When processors are about to hit low power states, the assertion of standbywfi signal, triggered by the wfi instruction, is essential to entering low power modes. If an IRQ is pending on the processor at the time wfi is issued, the wfi instruction completes and the processor restarts execution without asserting the standbywfi signal. Depending on the platform power controller HW this behaviour can be acceptable or not; if this behaviour must be prevented software should be provided with a way to disable the routing of interrupts to the core IRQ pins. On systems where raw GIC distributor interrupts are connected to the power controller as wake-up events (hence the power controller still senses IRQs and can wake up cores upon IRQ pending), the GIC CPU interface can be disabled on power down, so that the GIC CPU IF output is gated and wfi cannot complete, thereby preventing the standbywfi issue. This patch adds a simple function to the GIC driver that allows to disable the GIC CPU IF from power down procedures. Signed-off-by: Nicolas Pitre Signed-off-by: Lorenzo Pieralisi [rewrote commit log] Signed-off-by: Olof Johansson

ARM: mmp: avoid to include head file in mach-mmp

2013-08-24T09:44:45+00:00

pxa910_set_wake() & mmp2_set_wake() are both declared in head files of arch/arm/mach-mmp/include/mach directory. If we include these head files in irq-mmp driver, it blocks the multiplatform build. So adjust the code. Signed-off-by: Haojian Zhuang

ARM: bL_switcher: do not hardcode GIC IDs in the code

2013-07-30T13:02:16+00:00

Currently, GIC IDs are hardcoded making the code dependent on the 4+4 b.L configuration. Let's allow for GIC IDs to be discovered upon switcher initialization to support other b.L configurations such as the 1+1 one, or 2+3 as on the VExpress TC2. Signed-off-by: Nicolas Pitre

ARM: gic: add CPU migration support

2013-07-30T13:02:12+00:00

This is required by the big.LITTLE switcher code. The gic_migrate_target() changes the CPU interface mapping for the current CPU to redirect SGIs to the specified interface, and it also updates the target CPU for each interrupts to that CPU interface if they were targeting the current interface. Finally, pending SGIs for the current CPU are forwarded to the new interface. Because Linux does not use it, the SGI source information for the forwarded SGIs is not preserved. Neither is the source information for the SGIs sent by the current CPU to other CPUs adjusted to match the new CPU interface mapping. The required registers are banked so only the target CPU could do it. Signed-off-by: Nicolas Pitre