kernel/linux.git/include/linux/irqchip, branch linux-4.3.y

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2015-09-10T23:42:49+00:00

Pull more kvm updates from Paolo Bonzini: "ARM: - Full debug support for arm64 - Active state switching for timer interrupts - Lazy FP/SIMD save/restore for arm64 - Generic ARMv8 target PPC: - Book3S: A few bug fixes - Book3S: Allow micro-threading on POWER8 x86: - Compiler warnings Generic: - Adaptive polling for guest halt" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits) kvm: irqchip: fix memory leak kvm: move new trace event outside #ifdef CONFIG_KVM_ASYNC_PF KVM: trace kvm_halt_poll_ns grow/shrink KVM: dynamic halt-polling KVM: make halt_poll_ns per-vCPU Silence compiler warning in arch/x86/kvm/emulate.c kvm: compile process_smi_save_seg_64() only for x86_64 KVM: x86: avoid uninitialized variable warning KVM: PPC: Book3S: Fix typo in top comment about locking KVM: PPC: Book3S: Fix size of the PSPB register KVM: PPC: Book3S HV: Exit on H_DOORBELL if HOST_IPI is set KVM: PPC: Book3S HV: Fix race in starting secondary threads KVM: PPC: Book3S: correct width in XER handling KVM: PPC: Book3S HV: Fix preempted vcore stolen time calculation KVM: PPC: Book3S HV: Fix preempted vcore list locking KVM: PPC: Book3S HV: Implement H_CLEAR_REF and H_CLEAR_MOD KVM: PPC: Book3S HV: Fix bug in dirty page tracking KVM: PPC: Book3S HV: Fix race in reading change bit when removing HPTE KVM: PPC: Book3S HV: Implement dynamic micro-threading on POWER8 KVM: PPC: Book3S HV: Make use of unused threads when running guests ...

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-09-08T18:36:56+00:00

Pull more irq updates from Thomas Gleixner: "The second part of irq related updates: - Provide EOImode for GIC[V3] irq chips, which is a prerequisite for direct interrupt handling in [KVM] guests" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/GIC: Fix EOImode setting for non-DT/ACPI systems irqchip/GIC: Don't deactivate interrupts forwarded to a guest irqchip/GIC: Convert to EOImode == 1 irqchip/GICv3: Don't deactivate interrupts forwarded to a guest irqchip/GICv3: Convert to EOImode == 1

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2015-09-03T23:55:55+00:00

Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...

irqchip/GIC: Convert to EOImode == 1

2015-08-27T15:13:49+00:00

So far, GICv2 has been used with EOImode == 0. The effect of this mode is to perform the priority drop and the deactivation of the interrupt at the same time. While this works perfectly for Linux (we only have a single priority), it causes issues when an interrupt is forwarded to a guest, and when we want the guest to perform the EOI itself. For this case, the GIC architecture provides EOImode == 1, where: - A write to the EOI register drops the priority of the interrupt and leaves it active. Other interrupts at the same priority level can now be taken, but the active interrupt cannot be taken again - A write to the DIR marks the interrupt as inactive, meaning it can now be taken again. We only enable this feature when booted in HYP mode and that the device-tree reported a suitable CPU interface. Observable behaviour should remain unchanged. Signed-off-by: Marc Zyngier Reviewed-and-tested-by: Eric Auger Cc: Christoffer Dall Cc: Jiang Liu Cc: Cc: kvmarm@lists.cs.columbia.edu Cc: Jason Cooper Link: http://lkml.kernel.org/r/1440604845-28229-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner

irqchip/GICv3: Convert to EOImode == 1

2015-08-27T15:13:49+00:00

So far, GICv3 has been used in with EOImode == 0. The effect of this mode is to perform the priority drop and the deactivation of the interrupt at the same time. While this works perfectly for Linux (we only have a single priority), it causes issues when an interrupt is forwarded to a guest, and when we want the guest to perform the EOI itself. For this case, the GIC architecture provides EOImode == 1, where: - A write to ICC_EOIR1_EL1 drops the priority of the interrupt and leaves it active. Other interrupts at the same priority level can now be taken, but the active interrupt cannot be taken again - A write to ICC_DIR_EL1 marks the interrupt as inactive, meaning it can now be taken again. This patch converts the driver to be able to use this new mode, depending on whether or not the kernel can behave as a hypervisor. No feature change. Signed-off-by: Marc Zyngier Reviewed-and-tested-by: Eric Auger Cc: Christoffer Dall Cc: Jiang Liu Cc: Cc: kvmarm@lists.cs.columbia.edu Cc: Jason Cooper Link: http://lkml.kernel.org/r/1440604845-28229-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner

IRQCHIP: irq-mips-gic: Add support for CM3 64-bit timer irqs

2015-08-26T13:23:17+00:00

CM3 uses a 64-bit counter and compare registers so add support for them in the GIC counter interrupt. Signed-off-by: Markos Chandras Cc: Thomas Gleixner Cc: Jason Cooper Cc: Andrew Bresticker Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10648/ Signed-off-by: Ralf Baechle

IRQCHIP: irq-mips-gic: Extend GIC accessors for 64-bit CMs

2015-08-26T13:23:17+00:00

Previously, the GIC accessors were only accessing u32 registers but newer CMs may actually be 64-bit on MIPS64 cores. As a result of which, extended these accessors to support 64-bit reads and writes. Signed-off-by: Markos Chandras Cc: Thomas Gleixner Cc: Jason Cooper Cc: Andrew Bresticker Cc: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10709/ Signed-off-by: Ralf Baechle

KVM: arm/arm64: vgic: Allow HW irq to be encoded in LR

2015-08-12T10:28:24+00:00

Now that struct vgic_lr supports the LR_HW bit and carries a hwirq field, we can encode that information into the list registers. This patch provides implementations for both GICv2 and GICv3. Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier

irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance

2015-08-04T12:14:06+00:00

Commit 3228950621d9 ("irqchip: gic: Preserve gic V2 bypass bits in cpu ctrl register") added a new function, gic_cpu_if_up(), to program the GIC CPU_CTRL register. This function assumes that there is only one GIC instance present and hence always uses the chip data for the primary GIC controller. Although it is not common for there to be a secondary, some devices do support a secondary. Therefore, fix this by passing gic_cpu_if_up() a pointer to the appropriate chip data structure. Similarly, the function gic_cpu_if_down() only assumes that there is a single GIC instance present. Update this function so that an instance number is passed for the appropriate GIC and return an error code on failure. The vexpress TC2 (which has a single GIC) is currently the only user of this function and so update it accordingly. Note that because the TC2 only has a single GIC, the call to gic_cpu_if_down() should always be successful. Signed-off-by: Jon Hunter Reviewed-by: Marc Zyngier Cc: Cc: Russell King Cc: Nicolas Pitre Cc: Jason Cooper Link: http://lkml.kernel.org/r/1438332252-25248-2-git-send-email-jonathanh@nvidia.com Signed-off-by: Thomas Gleixner

irqchip/gicv3-its: Make the PCI/MSI code standalone

2015-07-29T22:14:38+00:00

We can now lookup the base ITS domain, making it possible to initialize the PCI/MSI code independently from the main ITS subsystem. This allows us to remove all the previously add hooks. Signed-off-by: Marc Zyngier Cc: Cc: Yijing Wang Cc: Ma Jun Cc: Lorenzo Pieralisi Cc: Duc Dang Cc: Hanjun Guo Cc: Bjorn Helgaas Cc: Jiang Liu Cc: Jason Cooper Link: http://lkml.kernel.org/r/1438091186-10244-15-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner