kernel/linux.git/include/linux/ioprio.h, branch v5.15.209

block: fix default IO priority handling again

2022-08-11T11:07:50+00:00

commit e589f46445960c274cc813a1cc8e2fc73b2a1849 upstream. Commit e70344c05995 ("block: fix default IO priority handling") introduced an inconsistency in get_current_ioprio() that tasks without IO context return IOPRIO_DEFAULT priority while tasks with freshly allocated IO context will return 0 (IOPRIO_CLASS_NONE/0) IO priority. Tasks without IO context used to be rare before 5a9d041ba2f6 ("block: move io_context creation into where it's needed") but after this commit they became common because now only BFQ IO scheduler setups task's IO context. Similar inconsistency is there for get_task_ioprio() so this inconsistency is now exposed to userspace and userspace will see different IO priority for tasks operating on devices with BFQ compared to devices without BFQ. Furthemore the changes done by commit e70344c05995 change the behavior when no IO priority is set for BFQ IO scheduler which is also documented in ioprio_set(2) manpage: "If no I/O scheduler has been set for a thread, then by default the I/O priority will follow the CPU nice value (setpriority(2)). In Linux kernels before version 2.6.24, once an I/O priority had been set using ioprio_set(), there was no way to reset the I/O scheduling behavior to the default. Since Linux 2.6.24, specifying ioprio as 0 can be used to reset to the default I/O scheduling behavior." So make sure we default to IOPRIO_CLASS_NONE as used to be the case before commit e70344c05995. Also cleanup alloc_io_context() to explicitely set this IO priority for the allocated IO context to avoid future surprises. Note that we tweak ioprio_best() to maintain ioprio_get(2) behavior and make this commit easily backportable. CC: stable@vger.kernel.org Fixes: e70344c05995 ("block: fix default IO priority handling") Reviewed-by: Damien Le Moal Tested-by: Damien Le Moal Signed-off-by: Jan Kara Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220623074840.5960-1-jack@suse.cz Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

block: fix default IO priority handling

2021-08-18T13:23:15+00:00

The default IO priority is the best effort (BE) class with the normal priority level IOPRIO_NORM (4). However, get_task_ioprio() returns IOPRIO_CLASS_NONE/IOPRIO_NORM as the default priority and get_current_ioprio() returns IOPRIO_CLASS_NONE/0. Let's be consistent with the defined default and have both of these functions return the default priority IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_NORM) when the user did not define another default IO priority for the task. In include/uapi/linux/ioprio.h, introduce the IOPRIO_BE_NORM macro as an alias to IOPRIO_NORM to clarify that this default level applies to the BE priotity class. In include/linux/ioprio.h, define the macro IOPRIO_DEFAULT as IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_BE_NORM) and use this new macro when setting a priority to the default. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20210811033702.368488-7-damien.lemoal@wdc.com [axboe: drop unnecessary lightnvm change] Signed-off-by: Jens Axboe

block: change ioprio_valid() to an inline function

2021-08-18T13:21:11+00:00

Change the ioprio_valid() macro in include/usapi/linux/ioprio.h to an inline function declared on the kernel side in include/linux/ioprio.h. Also improve checks on the class value by checking the upper bound value. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20210811033702.368488-4-damien.lemoal@wdc.com Signed-off-by: Jens Axboe

ioprio: move user space relevant ioprio bits to UAPI includes

2021-08-02T19:37:27+00:00

systemd added a modified copy of include/linux/ioprio.h into its code to get the relevant content definitions for the exposed ioprio_[get|set] system calls. Move the user space relevant ioprio bits to the UAPI includes to be able to use the ioprio_[get|set] syscalls as intended. Cc: Kay Sievers Cc: Greg Kroah-Hartman Cc: Jens Axboe Cc: linux-block@vger.kernel.org Signed-off-by: Oliver Hartkopp Link: https://lore.kernel.org/r/20210714195655.181943-1-socketcan@hartkopp.net Signed-off-by: Jens Axboe

block: Introduce get_current_ioprio()

2018-11-20T02:03:46+00:00

Define get_current_ioprio() as an inline helper to obtain the caller I/O priority from its task I/O context. Use this helper in blk_init_request_from_bio() to set a request ioprio. Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe

fs: aio ioprio add explicit block layer dependence

2018-06-04T18:20:39+00:00

Previously, the ioprio_check_cap function was only defined when CONFIG_BLOCK was set. Make this relationship explicit and add a stub for !CONFIG_BLOCK. Signed-off-by: Adam Manzanares Signed-off-by: Al Viro

block: add ioprio_check_cap function

2018-05-31T14:50:54+00:00

Aio per command iopriority support introduces a second interface between userland and the kernel capable of passing iopriority. The aio interface also needs the ability to verify that the submitting context has sufficient privileges to submit IOPRIO_RT commands. This patch creates the ioprio_check_cap function to be used by the ioprio_set system call and also by the aio interface. Signed-off-by: Adam Manzanares Reviewed-by: Christoph Hellwig Reviewed-by: Jeff Moyer Signed-off-by: Al Viro

Merge branch 'linus' into sched/core, to pick up fixes

2017-11-08T09:17:15+00:00

Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

block/ioprio: Use a helper to check for RT prio

2017-10-10T09:45:39+00:00

A side-effect to the old code is that now SCHED_DEADLINE is also recognized. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Peter Zijlstra (Intel) Cc: Jens Axboe Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20171004154901.26904-2-bigeasy@linutronix.de Signed-off-by: Ingo Molnar