kernel/linux.git/include/linux/interrupt.h, branch v4.5.3

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2016-01-24T02:45:06+00:00

Pull rdma updates from Doug Ledford: "Initial roundup of 4.5 merge window patches - Remove usage of ib_query_device and instead store attributes in ib_device struct - Move iopoll out of block and into lib, rename to irqpoll, and use in several places in the rdma stack as our new completion queue polling library mechanism. Update the other block drivers that already used iopoll to use the new mechanism too. - Replace the per-entry GID table locks with a single GID table lock - IPoIB multicast cleanup - Cleanups to the IB MR facility - Add support for 64bit extended IB counters - Fix for netlink oops while parsing RDMA nl messages - RoCEv2 support for the core IB code - mlx4 RoCEv2 support - mlx5 RoCEv2 support - Cross Channel support for mlx5 - Timestamp support for mlx5 - Atomic support for mlx5 - Raw QP support for mlx5 - MAINTAINERS update for mlx4/mlx5 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates - Add support for remote invalidate to the iSER driver (pushed through the RDMA tree due to dependencies, acknowledged by nab) - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies, acknowledged by Bruce)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits) IB/mlx5: Unify CQ create flags check IB/mlx5: Expose Raw Packet QP to user space consumers {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib IB/mlx5: Support setting Ethernet priority for Raw Packet QPs IB/mlx5: Add Raw Packet QP query functionality IB/mlx5: Add create and destroy functionality for Raw Packet QP IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types IB/mlx5: Allocate a Transport Domain for each ucontext net/mlx5_core: Warn on unsupported events of QP/RQ/SQ net/mlx5_core: Add RQ and SQ event handling net/mlx5_core: Export transport objects IB/mlx5: Expose CQE version to user-space IB/mlx5: Add CQE version 1 support to user QPs and SRQs IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext IB/sa: Fix netlink local service GFP crash IB/srpt: Remove redundant wc array IB/qib: Improve ipoib UD performance IB/mlx4: Advertise RoCE v2 support IB/mlx4: Create and use another QP1 for RoCEv2 IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers ...

irq_poll: make blk-iopoll available outside the block layer

2015-12-11T19:52:24+00:00

The new name is irq_poll as iopoll is already taken. Better suggestions welcome. Signed-off-by: Christoph Hellwig Reviewed-by: Bart Van Assche

genirq: Implement irq_percpu_is_enabled()

2015-12-08T11:53:29+00:00

Certain interrupt controller drivers have a register set that does not make it easy to save/restore the mask of enabled/disabled interrupts at suspend/resume time. At resume time, such drivers rely on the core kernel irq subsystem to tell whether such or such interrupt is enabled or not, in order to restore the proper state in the interrupt controller register. While the irqd_irq_disabled() provides the relevant information for global interrupts, there is no similar function to query the enabled/disabled state of a per-CPU interrupt. Therefore, this commit complements the percpu_irq API with an irq_percpu_is_enabled() function. [ tglx: Simplified the implementation and added kerneldoc ] Signed-off-by: Thomas Petazzoni Cc: linux-arm-kernel@lists.infradead.org Cc: Tawfik Bayouk Cc: Nadav Haklai Cc: Lior Amsalem Cc: Andrew Lunn Cc: Sebastian Hesselbarth Cc: Gregory Clement Cc: Jason Cooper Cc: Marc Zyngier Link: http://lkml.kernel.org/r/1445347435-2333-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Thomas Gleixner

genirq: Handle force threading of irqs with primary and thread handler

2015-09-22T10:39:57+00:00

Force threading of interrupts does not really deal with interrupts which are requested with a primary and a threaded handler. The current policy is to leave them alone and let the primary handler run in interrupt context, but we set the ONESHOT flag for those interrupts as well. Kohji Okuno debugged a problem with the SDHCI driver where the interrupt thread waits for a hardware interrupt to trigger, which can't work well because the hardware interrupt is masked due to the ONESHOT flag being set. He proposed to set the ONESHOT flag only if the interrupt does not provide a thread handler. Though that does not work either because these interrupts can be shared. So the other interrupt would rightfully get the ONESHOT flag set and therefor the same situation would happen again. To deal with this proper, we need to force thread the primary handler of such interrupts as well. That means that the primary interrupt handler is treated as any other primary interrupt handler which is not marked IRQF_NO_THREAD. The threaded handler becomes a separate thread so the SDHCI flow logic can be handled gracefully. The same issue was reported against 4.1-rt. Reported-and-tested-by: Kohji Okuno Reported-By: Michal Smucr Reported-and-tested-by: Nathan Sullivan Signed-off-by: Thomas Gleixner Cc: Sebastian Andrzej Siewior Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1509211058080.5606@nanos Signed-off-by: Thomas Gleixner

hrtimer: Remove hrtimer_start() return value

2015-04-22T15:06:52+00:00

No user was ever interested whether the timer was active or not when it was started. All abusers of the return value are gone, so get rid of it. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Cc: Preeti U Murthy Cc: Viresh Kumar Cc: Marcelo Tosatti Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/20150414203503.483556394@linutronix.de Signed-off-by: Thomas Gleixner

hrtimer: Get rid of hrtimer softirq

2015-04-22T15:06:50+00:00

hrtimer softirq is a leftover from the initial implementation and serves only the purpose to handle the enqueueing of already expired timers in the high resolution timer mode. We discussed whether we change the return value and force all start sites to handle that the timer is already expired, but that would be a Herculean task and I'm not sure whether its a good idea to enforce that handling on everyone. A simpler solution is to enforce a timer interrupt instead of raising and scheduling a softirq. Just use the existing infrastructure to do so and remove all the softirq leftovers. The HRTIMER softirq enum is now unused, but kept around because trace parsers rely on the existing numbering. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Cc: Preeti U Murthy Cc: Viresh Kumar Cc: Marcelo Tosatti Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/20150414203501.840834708@linutronix.de Signed-off-by: Thomas Gleixner

genirq: Allow the irqchip state of an IRQ to be save/restored

2015-04-08T21:28:28+00:00

There is a number of cases where a kernel subsystem may want to introspect the state of an interrupt at the irqchip level: - When a peripheral is shared between virtual machines, its interrupt state becomes part of the guest's state, and must be switched accordingly. KVM on arm/arm64 requires this for its guest-visible timer - Some GPIO controllers seem to require peeking into the interrupt controller they are connected to to report their internal state This seem to be a pattern that is common enough for the core code to try and support this without too many horrible hacks. Introduce a pair of accessors (irq_get_irqchip_state/irq_set_irqchip_state) to retrieve the bits that can be of interest to another subsystem: pending, active, and masked. - irq_get_irqchip_state returns the state of the interrupt according to a parameter set to IRQCHIP_STATE_PENDING, IRQCHIP_STATE_ACTIVE, IRQCHIP_STATE_MASKED or IRQCHIP_STATE_LINE_LEVEL. - irq_set_irqchip_state similarly sets the state of the interrupt. Signed-off-by: Marc Zyngier Reviewed-by: Bjorn Andersson Tested-by: Bjorn Andersson Cc: linux-arm-kernel@lists.infradead.org Cc: Abhijeet Dharmapurikar Cc: Stephen Boyd Cc: Phong Vo Cc: Linus Walleij Cc: Tin Huynh Cc: Y Vo Cc: Toan Le Cc: Bjorn Andersson Cc: Jason Cooper Cc: Arnd Bergmann Link: http://lkml.kernel.org/r/1426676484-21812-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner

Merge branch 'linus' into irq/core to get the GIC updates which

2015-04-08T21:26:21+00:00

conflict with pending GIC changes. Conflicts: drivers/usb/isp1760/isp1760-core.c

genirq: Remove the deprecated 'IRQF_DISABLED' request_irq() flag entirely

2015-03-05T19:53:06+00:00

The IRQF_DISABLED flag is a NOOP and has been scheduled for removal since Linux v2.6.36 by commit 6932bf37bed4 ("genirq: Remove IRQF_DISABLED from core code"). According to commit e58aa3d2d0cc ("genirq: Run irq handlers with interrupts disabled"), running IRQ handlers with interrupts enabled can cause stack overflows when the interrupt line of the issuing device is still active. This patch ends the grace period for IRQF_DISABLED (i.e., SA_INTERRUPT in older versions of Linux) and removes the definition and all remaining usages of this flag. There's still a few non-functional references left in the kernel source: - The bigger hunk in Documentation/scsi/ncr53c8xx.txt is removed entirely as IRQF_DISABLED is gone now; the usage in older kernel versions (including the old SA_INTERRUPT flag) should be discouraged. The trouble of using IRQF_SHARED is a general problem and not specific to any driver. - I left the reference in Documentation/PCI/MSI-HOWTO.txt untouched since it has already been removed in linux-next. - All remaining references are changelogs that I suggest to keep. Signed-off-by: Valentin Rothberg Cc: Afzal Mohammed Cc: Arnd Bergmann Cc: Brian Norris Cc: Christoph Hellwig Cc: Dan Carpenter Cc: David Woodhouse Cc: Ewan Milne Cc: Eyal Perry Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: H. Peter Anvin Cc: Hannes Reinecke Cc: Hongliang Tao Cc: Huacai Chen Cc: Jiri Kosina Cc: Jonathan Corbet Cc: Keerthy Cc: Laurent Pinchart Cc: Linus Torvalds Cc: Nishanth Menon Cc: Paul Bolle Cc: Peter Ujfalusi Cc: Peter Zijlstra Cc: Quentin Lambert Cc: Rajendra Nayak Cc: Ralf Baechle Cc: Santosh Shilimkar Cc: Sricharan R Cc: Thomas Gleixner Cc: Tony Lindgren Cc: Zhou Wang Cc: iss_storagedev@hp.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Link: http://lkml.kernel.org/r/1425565425-12604-1-git-send-email-valentinrothberg@gmail.com Signed-off-by: Ingo Molnar

genirq / PM: Add flag for shared NO_SUSPEND interrupt lines

2015-03-04T20:42:19+00:00

It currently is required that all users of NO_SUSPEND interrupt lines pass the IRQF_NO_SUSPEND flag when requesting the IRQ or the WARN_ON_ONCE() in irq_pm_install_action() will trigger. That is done to warn about situations in which unprepared interrupt handlers may be run unnecessarily for suspended devices and may attempt to access those devices by mistake. However, it may cause drivers that have no technical reasons for using IRQF_NO_SUSPEND to set that flag just because they happen to share the interrupt line with something like a timer. Moreover, the generic handling of wakeup interrupts introduced by commit 9ce7a25849e8 (genirq: Simplify wakeup mechanism) only works for IRQs without any NO_SUSPEND users, so the drivers of wakeup devices needing to use shared NO_SUSPEND interrupt lines for signaling system wakeup generally have to detect wakeup in their interrupt handlers. Thus if they happen to share an interrupt line with a NO_SUSPEND user, they also need to request that their interrupt handlers be run after suspend_device_irqs(). In both cases the reason for using IRQF_NO_SUSPEND is not because the driver in question has a genuine need to run its interrupt handler after suspend_device_irqs(), but because it happens to share the line with some other NO_SUSPEND user. Otherwise, the driver would do without IRQF_NO_SUSPEND just fine. To make it possible to specify that condition explicitly, introduce a new IRQ action handler flag for shared IRQs, IRQF_COND_SUSPEND, that, when set, will indicate to the IRQ core that the interrupt user is generally fine with suspending the IRQ, but it also can tolerate handler invocations after suspend_device_irqs() and, in particular, it is capable of detecting system wakeup and triggering it as appropriate from its interrupt handler. That will allow us to work around a problem with a shared timer interrupt line on at91 platforms. Link: http://marc.info/?l=linux-kernel&m=142252777602084&w=2 Link: http://marc.info/?t=142252775300011&r=1&w=2 Link: https://lkml.org/lkml/2014/12/15/552 Reported-by: Boris Brezillon Signed-off-by: Rafael J. Wysocki Acked-by: Peter Zijlstra (Intel) Acked-by: Mark Rutland