kernel/linux.git/include/linux/iio, branch v7.3-rc1

Merge tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2026-08-26T21:21:30+00:00

Pull more thermal control updates from Rafael Wysocki: "This mostly consists of assorted updates of thermal drivers, including new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of recent cosmetic thermal core updates that went against driver core plans to eliminate class_create(): - Fix missing bitfield include headers in Armada and QCom SPM BMG drivers (Daniel Lezcano) - Fix missed file when manually applying a change after a conflict resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano) - Move thermal_zone_device_enable() to the right place in order to prevent calling it if the thermal zone registration failed (Dan Carpenter) - Improve bitfield manipulations on Armada (Bryan B. Lima) - Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang) - Fix wrong boundary when clamping the low values in the set_trips() callback and fix wrong mask when setting the temperature interval on Airoha (Christian Marangi) - Make use of the regmap API to support Airoha AN7583 (Christian Marangi) - Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC sensor (Rakesh Kota) - Fix unbalanced clock enablement when the resume fails on the iMX driver (Can Peng) - Add Qualcomm Master BandGap thermal monitor support (Satya Priya Kakitapalli) - Add Maili Temperature bindings compatible (Haritha S K) - Add a devm action to clean hardware interrupts, sampling, and control registers on Spacemit K1 (Pei Xiao) - Fix trivial typo in a thermal OF code comment (Marek Vasut) - Remove unnecessary print on Qcom SPMI ADC driver when a call to devm_request_threaded_irq() fails as this one already prints a message (Jishnu Prakash) - Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and shared interrupt with the IIO driver (Jishnu Prakash) - Make resets optional on MT8196 and add the corresponding property in the DT bindings (AngeloGioacchino Del Regno) - Fix clock staying enabled on failing resume operation on Qoriq (Can Peng) - Fix wrong closing brace position in thermal library header (Andreas Haufler) - Fix low and high trip point validation by moving the check after the clamp on the spacemit driver (surendra) - Remove redundant error messages on IRQ request failure (Pan Chuang) - Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal driver to avoid modpost warnings that would appear after merging the iio tree against the thermal updates (Nathan Chancellor) - Revert two recent cosmetic updates of the thermal core conflicting with driver core plans to eliminate class_create() (Rafael Wysocki)" * tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER Revert "thermal/core: Allocate the thermal class dynamically" Revert "thermal/core: Use the thermal class pointer as init guard" thermal/drivers/armada: Fix missing bitfields include thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file thermal/drivers: Remove redundant error messages on IRQ request failure thermal/drivers/spacemit: Validate clamped trip thresholds tools/lib/thermal: Fix misplaced extern "C" closing brace thermal/drivers/qoriq: Disable clock on resume failure thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196 dt-bindings: thermal: mediatek: Make resets optional for MT8196 thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print thermal/of: Fix trivial enabled typo thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring dt-bindings: thermal: Add Qualcomm MBG thermal monitor support ...

iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver

2026-08-07T15:18:44+00:00

The SDAM0 IRQ can be triggered for both EOC (end of conversion) events for immediate ADC reads done in this driver and for threshold violation events, based on ADC_TM thresholds configured from the auxiliary ADC_TM driver on TM channels on the first SDAM. At present, this interrupt is handled only in the ISR in the main ADC driver. When the ISR is triggered for an ADC_TM event, this driver notifies the ADC_TM driver by calling a notifier callback exposed from it for this purpose. To simplify the interrupt handling in both drivers, share the interrupt between the drivers. With this, ADC_TM interrupts on SDAM0 will be handled directly in the ADC_TM driver, so remove the notifier callback and all TM interrupt handling in the main ADC ISR. Signed-off-by: Jishnu Prakash Signed-off-by: Daniel Lezcano Reviewed-by: Jonathan Cameron Link: https://patch.msgid.link/20260722-gen3_adc_tm-v4-2-011981f756c8@oss.qualcomm.com

iio: core: add IIO_VAL_DECIMAL64_FEMTO format type

2026-08-04T23:03:28+00:00

Extend the IIO_VAL_DECIMAL64_* family with a femto-scaled variant (scale 15), following the existing MILLI/MICRO/NANO/PICO pattern. Both the read formatting path in __iio_format_value() and the write parsing path in iio_write_channel_info() (via kstrtodec64()) already derive their scale from "type - IIO_VAL_DECIMAL64_BASE", so the new type only needs to be added to the respective switch cases. This is needed by drivers reporting very small SI quantities where the existing pico scale loses precision. For example the Sensirion SLF3S liquid flow sensor reports its volume-flow scale in m^3/s, where the SLF3S-0600F scale is ~1.667e-12 m^3/s: at pico scale only a single significant digit survives, whereas femto scale preserves the full sensor resolution. Signed-off-by: Wadim Mueller Reviewed-by: Rodrigo Alencar Signed-off-by: Jonathan Cameron

iio: inv_sensors: improve period measurement by using a longer delay

2026-07-24T00:01:01+00:00

Period measurement can be difficult when using high sampling frequency where the jitter criteria is hard to meet because of the system jitter. This new version is using the delta time between 2 distant interrupts to measure an interval of at least 20ms. 20ms is a good compromise between the mitigation of system jitter and the delay to update period. This way we decorrelate the period measurement from the interrupt timestamps syncing using only the 2 last interrupts. Signed-off-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron

iio: inv_sensors: convert to kernel types

2026-07-24T00:00:48+00:00

Convert standard types (u)intXX_t to kernel type u/sXX. Suggested-by: Andy Shevchenko Signed-off-by: Jean-Baptiste Maneyrol Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron

iio: core: add decimal value formatting into 64-bit value

2026-06-29T23:15:52+00:00

Create new format types for iio values (IIO_VAL_DECIMAL64_*), which defines the representation of fixed decimal point values into a single 64-bit number. This new format increases the range of represented values, allowing for integer parts greater than 2^32, as bits are not "wasted" in the fractional part, which can be seen in IIO_VAL_INT_PLUS_MICRO and IIO_VAL_INT_PLUS_NANO. Helpers are created to compose and decompose 64-bit decimals into integer values used in IIO formatting interfaces, which creates consistency and avoid error-prone manual assignments when using wordpart macros. When doing the parsing, kstrtodec64() is used with the scale defined by the specific decimal format type. Signed-off-by: Rodrigo Alencar Reviewed-by: Nuno Sá Signed-off-by: Jonathan Cameron

iio: Convert IIO_CHAN_SOFT_TIMESTAMP() to be compound literal

2026-05-31T10:01:48+00:00

Currently IIO_CHAN_SOFT_TIMESTAMP() can only be used to fill the static data. In some cases it would be convenient to use it as right value in the assignment operation. But it can't be done as is, because compiler has no clue about the data layout. Converting it to be a compound literal allows the above mentioned usage. While at it, tidy up the indentation. We also have to change existing uses of compound literal at the same time to avoid compiler errors. Signed-off-by: Andy Shevchenko Signed-off-by: David Lechner Signed-off-by: Jonathan Cameron

iio: buffer: Move from int64_t to s64 for timestamp

2026-05-31T09:59:32+00:00

iio_push_to_buffers_with_ts_unaligned() uses int64_t for timestamp. Move it from int64_t to s64 to make consistent with: - iio_push_to_buffers_with_ts() - all current users that supply s64 anyway This will reduce potential of wrong type being chosen when using this API. Signed-off-by: Andy Shevchenko Signed-off-by: Jonathan Cameron

iio: backend: add devm_iio_backend_get_by_index()

2026-05-31T09:59:32+00:00

Add a new function to get an IIO backend by its index in the io-backends device tree property. This is useful for multi-channel devices that have multiple backends, where looking up by index is more straightforward than using named backends. Extract __devm_iio_backend_fwnode_get_by_index() from the existing __devm_iio_backend_fwnode_get(), taking the index directly as a parameter. The new public API devm_iio_backend_get_by_index() uses the index to find the backend reference in the io-backends property, avoiding the need for io-backend-names. Reviewed-by: David Lechner Reviewed-by: Nuno Sá Signed-off-by: Antoniu Miclaus Signed-off-by: Jonathan Cameron

iio: ABI: Add support for floating-point numbers in buffer scan elements

2026-04-27T08:58:16+00:00

In the data storage description of a scan element, the first character after the colon can have the values 's' and 'u' to specify signed and unsigned integers, respectively. Add 'f' as an allowed value to specify floating-point numbers formatted according to the IEEE 754 standard. Signed-off-by: Francesco Lavra Signed-off-by: Jonathan Cameron