kernel/linux.git/include/linux/iio, branch master

Merge tag 'v7.0-rc7' into char-misc-next

2026-04-06T07:04:53+00:00

We need the char/misc/iio/comedi fixes in here as well for testing Signed-off-by: Greg Kroah-Hartman

iio: st_sensors: correct kernel-doc issues

2026-03-22T11:53:19+00:00

Use the proper kernel-doc format and struct member names to avoid kernel-doc warnings: Warning: include/linux/iio/common/st_sensors.h:184 struct member 'int1' not described in 'st_sensor_data_ready_irq' Warning: ../include/linux/iio/common/st_sensors.h:184 struct member 'int2' not described in 'st_sensor_data_ready_irq' Warning: ../include/linux/iio/common/st_sensors.h:184 struct member 'stat_drdy' not described in 'st_sensor_data_ready_irq' Warning: ../include/linux/iio/common/st_sensors.h:184 struct member 'ig1' not described in 'st_sensor_data_ready_irq' Warning: ../include/linux/iio/common/st_sensors.h:219 struct member 'num_ch' not described in 'st_sensor_settings' Warning: ../include/linux/iio/common/st_sensors.h:263 struct member 'num_data_channels' not described in 'st_sensor_data' Signed-off-by: Randy Dunlap Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron

iio: add IIO_DECLARE_QUATERNION() macro

2026-03-02T20:52:21+00:00

Add a new IIO_DECLARE_QUATERNION() macro that is used to declare the field in an IIO buffer struct that contains a quaternion vector. Quaternions are currently the only IIO data type that uses the .repeat feature of struct iio_scan_type. This has an implicit rule that the element in the buffer must be aligned to the entire size of the repeated element. This macro will make that requirement explicit. Since this is the only user, we just call the macro IIO_DECLARE_QUATERNION() instead of something more generic. Signed-off-by: David Lechner Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron

iio: core: Add IIO_EV_INFO_SCALE to event info

2026-03-01T12:04:07+00:00

Implement support for IIO_EV_INFO_SCALE in the internal enum iio_event_info to allow proper ABI compliance. This allows drivers (like the ADXL345) to expose event scale attributes using the standard IIO ABI rather than manual device attributes. Signed-off-by: Taha Ed-Dafili <0rayn.dev@gmail.com> Reviewed-by: David Lechner Signed-off-by: Jonathan Cameron

Merge branch 'ib-iio-thermal-qcom-pmic5' into togreg

2026-02-23T21:03:25+00:00

Immutable branch to allow this base work to be merged into thermal.

iio: adc: Add support for QCOM PMIC5 Gen3 ADC

2026-02-23T20:23:32+00:00

The ADC architecture on PMIC5 Gen3 is similar to that on PMIC5 Gen2, with all SW communication to ADC going through PMK8550 which communicates with other PMICs through PBS. One major difference is that the register interface used here is that of an SDAM (Shared Direct Access Memory) peripheral present on PMK8550. There may be more than one SDAM used for ADC5 Gen3 and each has eight channels, which may be used for either immediate reads (same functionality as previous PMIC5 and PMIC5 Gen2 ADC peripherals) or recurring measurements (same as ADC_TM functionality). By convention, we reserve the first channel of the first SDAM for all immediate reads and use the remaining channels across all SDAMs for ADC_TM monitoring functionality. Add support for PMIC5 Gen3 ADC driver for immediate read functionality. ADC_TM is implemented as an auxiliary thermal driver under this ADC driver. Signed-off-by: Jishnu Prakash Signed-off-by: Jonathan Cameron

iio: industrialio-backend: support backend capabilities

2026-02-23T08:24:21+00:00

Not all backends support the full set of capabilities provided by the industrialio-backend framework. Capability bits can be used in frontends and backends for checking for a certain feature set, or if using related functions can be expected to fail. Capability bits should be set by a compatible backend and provided when registering the backend. Reviewed-by: Nuno Sá Reviewed-by: David Lechner Signed-off-by: Tomas Melin Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2026-02-02T16:08:30+00:00

Jonathan writes: IIO: New device support, features and cleanup for the 6.20/7.0 cycle. Slightly messier than normal unfortunately due to some conflicts and build config bugs related to I3C drivers. One last minute Kconfig fix right at the top after a linux-next report. I've simplified the Kconfig and made it match other instances in the kernel so that should be safe enough despite short soak time in front of build bots. Merge of an immutable branch from I3C to get some stubs that were missing and caused build issues with dual I2C / I3C drivers. This also brought in a drop of some deprecated interfaces so there is also one patch to update a new driver to not use those. We are having another go at using cleanup.h magic with the IIO mode claim functions after backing out last try at this. This time we have wrappers around the new ACQUIRE() and ACQUIRE_ERR() macros. Having been burnt once, we will be taking it a bit more slowly this time wrt to wide adoption of these! Thanks in particular to Kurt for taking on this core IIO work. New Device Support ================== adi,ad18113 - New driver to support the AD18113 amplifier - an interesting device due to the external bypass paths where we need to describe what gain those paths have in DT. Longer term it will be interesting to see if this simplistic description is enough for real deployments. adi,ad4062 - New driver for the AD4060 and AD4052 SAR ADCs including trigger, event and GPIO controller support. Follow up patch replaced use of some deprecated I3C interfaces prior to the I3C immutable branch merge as that includes dropping them. adi,ad4134 - New driver for the AD4134 24bit 4 channel simultaneous sampling ADC. adi,ad7768-1, - Add support for the ADAQ767-1, ADAQ7768-1 and ADAQ7769-1 ADCs after some rework to enable the driver to support multiple device types. adi,ad9467 - Add support for the similar ad9211 ADC to this existing driver. - Make the selection of 2s comp mode explicit for normal operation and switch to offset binary when entering calibration mode. honeywell,abp2 - New driver to support this huge family (100+) of board mount pressure and temperature sensors. maxim,max22007 - New drier for this 4 channel DAC. memsic,mmc5633 - New driver for this I2C/I3C magnetometer. Follow on patches fixed up issues related to single driver supporting both bus types. microchip,mcp747feb02 - New driver for the Microchip MCP47F(E/V)B(0/1/2)1, MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8 buffered voltage output DACs. nxp,sar-adc - New driver support ADCs found on s32g2 and s32g3 platforms. ti,ads1018 - New drier for the ADS1018 and ADS1118 SPI ADCs. ti,ads131m02 - New driver supporting ADS131M(02/03/04/06/08)24-bit simultaneous sampling ADCs. Features ======== iio-core - New IIO_DEV_ACQUIRE_DIRECT_MODE() / IIO_DEV_ACQUIRE_FAILED() + equivalents for the much rarer case where the mode needs pinning whether or not it is in direct mode. These use the ACQUIRE() / ACQUIRE_ERR() infrastructure underneath to provide both simple checks on whether we got the requested mode and to provide scope based release. Applied in a few initial drivers. adi,ad9467 - Support calibbias control adi,adf4377 - Add support to act as a clock provider. adi,adxl380 - Support low power 1KHz sampling frequency mode. Required rework of how events and filters were configured, plus applying of constraints when in this mode. rf-digital,rfd77402 - Add interrupt support as alternative to polling for completion. st,lsm6dsx - Tap event detection (after considerable driver rework) Cleanup and Minor Fixes ======================= More minor cleanup such as typos, white space etc not called out except where they were applied to a lot of drivers. Various drivers. - Use of dev_err_probe() to cleanup error handling. - Introduce local struct device and struct device_node variables to reduce duplication of getting them from containing structs. - Ensure uses of iio_trigger_generic_data_rdy_poll() set IRQF_NO_THREAD as that function calls non threaded child interrupt handlers. - Replace IRQF_ONESHOT in not thread interrupt handlers with IRQF_NO_THREAD to ensure they run as intended. Drop one unnecessary case. iio-sw-device/trigger. - Constify configs_group_operations structures. iio-buffer-dma / buffer-dma-engine - Use lockdep_assert_held() to replace WARN_ON() to check lock is correctly held. - Make use of cleanup.h magic to simplify various code paths. - Make iio_dma_buffer_init() return void rather than always success. adi,ad7766 - Replace custom interrupt handler with iio_trigger_generic_data_rdy_poll() adi,ad9832 - Drop legacy platform_data support. adi,ade9000 - Add a maintainer entry. adi,adt7316 - Move to EXPORT_GPL_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() so the compiler can cleanly drop unused pm structures and callbacks. adi,adxl345 - Relax build constraint vs the driver that is in input so both may be built as modules and selection made at runtime. adi,adxl380 - Make sure we don't read tail entries in the hardware fifo if a partial new scan has been written. - Move to a single larger regmap_noinc_read() to read the hardware fifo. aspeed,ast2600 - Add missing interrupts property to DT binding. bosch,bmi270_i2c - Add missing MODULE_DEVICE_TABLE() macros so auto probing of modules can work. bosch,smi330 - Drop duplicate assignment of IIO_TYPE in smi330_read_avail() - Use new common field_get() and field_prep() helpers to replace local version. honeywell,mprls0025pa Fixes delayed to merge window as late in cycle and we didn't want to delay the rest of the series. - Allow Kconfig selection of specific bus sub-drivers rather than tying that to the buses themselves being supported. - Zero spi_transfer structure to avoid chance of unintentionally set fields effecting transfer. - Fix a potential timing violation wrt to the chip select to first clock edge timing. - As recent driver, take risk inherent in dropping interrupt direction from driver as that should be set by firmware. - Fix wrong reported number of data bits for channel. - Fix a pressure channel calculation bug. - Rework to allow embedding the tx buffer in the iio_priv() structure rather than requiring separate allocation. - Move the buffer clearing to the shared core bringing it into affect for SPI as well as I2C. - Stricter checks for status byte. - Greatly simplify the measurement sequence. - Add a copyright entry to reflect Petre's continued work on this driver. intersil,isl29018 - Switch from spritnf to sysfs_emit_at() to make it clear overflow can't occur. invensense,icm42600 - Allow sysfs access to temperature when buffered capture in use as it does not impact other sensor data paths. invensense,itg3200 - Check unused return value in read_raw() callback. men,z188 - Drop now duplicated module alias. rf-digital,rfd77402 - Add DT binding doc and explicit of_device_id table. - Poll for timeout with times as on datasheet, then replace opencoded version with read_poll_timeout(). sensiron,scd4x - Add missing timestamp channel. The code to push it to the buffer was there but there was no way to turn it on. vti,sca3000 - Fix resource leak if iio_device_register() fails. * tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (144 commits) iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin iio: sca3000: Fix a resource leak in sca3000_probe() iio: proximity: rfd77402: Add interrupt handling support iio: proximity: rfd77402: Document device private data structure iio: proximity: rfd77402: Use devm-managed mutex initialization iio: proximity: rfd77402: Use kernel helper for result polling iio: proximity: rfd77402: Align polling timeout with datasheet iio: cros_ec: Allow enabling/disabling calibration mode iio: frequency: ad9523: correct kernel-doc bad line warning iio: buffer: buffer_impl.h: fix kernel-doc warnings iio: gyro: itg3200: Fix unchecked return value in read_raw MAINTAINERS: add entry for ADE9000 driver iio: accel: sca3000: remove unused last_timestamp field iio: accel: adxl372: remove unused int2_bitmask field iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll() iio: magnetometer: Remove IRQF_ONESHOT iio: Replace IRQF_ONESHOT with IRQF_NO_THREAD iio: Use IRQF_NO_THREAD iio: dac: Add MAX22007 DAC driver support dt-bindings: iio: dac: Add max22007 ...

iio: frequency: ad9523: correct kernel-doc bad line warning

2026-01-29T17:10:44+00:00

Insert a "*" in the kernel-doc line to resolve a warning: Warning: include/linux/iio/frequency/ad9523.h:47 bad line: LSB = 1/2 of a period of the divider input clock. Signed-off-by: Randy Dunlap Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron

iio: buffer: buffer_impl.h: fix kernel-doc warnings

2026-01-29T17:09:30+00:00

Resolve all kernel-doc warnings in buffer_impl.h: Warning: include/linux/iio/buffer_impl.h:172 struct member 'direction' not described in 'iio_buffer' Warning: include/linux/iio/buffer_impl.h:184 No description found for return value of 'iio_update_buffers' Also correct one typo (word order switch) and remove one stray space in a kernel-doc comment. Signed-off-by: Randy Dunlap Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron