kernel/linux.git/include/linux/hid-sensor-ids.h, branch v6.6.132

HID: hid-sensor-custom: Allow more custom iio sensors

2022-12-20T14:24:57+00:00

The known LUID table for established/known custom HID sensors was limited to sensors with "INTEL" as manufacturer. But some vendors such as Lenovo also include fairly standard iio sensors (e.g. ambient light) in their custom sensors. Expand the known custom sensors table by a tag used for the platform device name and match sensors based on the LUID as well as optionally on model and manufacturer properties. Signed-off-by: Philipp Jungkamp Reviewed-by: Jonathan Cameron Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina

iio: Add relative sensitivity support

2021-03-11T20:47:09+00:00

Some hid sensors may use relative sensitivity such as als sensor. This patch adds relative sensitivity checking for all hid sensors. Signed-off-by: Ye Xiang Acked-by: Jiri Kosina Link: https://lore.kernel.org/r/20210207070048.23935-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron

HID: hid-sensor-custom: Add custom sensor iio support

2021-01-22T08:52:02+00:00

Currently custom sensors properties are not decoded and it is up to user space to interpret. Some manufacturers already standardized the meaning of some custom sensors. They can be presented as a proper IIO sensor. We can identify these sensors based on manufacturer and serial number property in the report. This change is identifying hinge sensor when the manufacturer is "INTEL". This creates a platform device so that a sensor driver can be loaded to process these sensors. Signed-off-by: Ye Xiang Acked-by: Jiri Kosina Link: https://lore.kernel.org/r/20201215054444.9324-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335

2019-06-05T15:37:06+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman

iio: hid-sensor-hub: Implement batch mode

2017-05-16T18:44:01+00:00

HID sensor hubs using Integrated Senor Hub (ISH) has added capability to support batch mode. This allows host processor to go to sleep for extended duration, while the sensor hub is storing samples in its internal buffers. 'Commit f4f4673b7535 ("iio: add support for hardware fifo")' implements feature in IIO core to implement such feature. This feature is used in bmc150-accel-core.c to implement batch mode. This implementation allows software device buffer watermark to be used as a hint to adjust hardware FIFO. But HID sensor hubs don't allow to change internal buffer size of FIFOs. Instead an additional usage id to set "maximum report latency" is defined. This allows host to go to sleep upto this latency period without getting any report. Since there is no ABI to set this latency, a new attribute "hwfifo_timeout" is added so that user mode can specify a latency. This change checks presence of usage id to get/set maximum report latency and if present, it will expose hwfifo_timeout. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

iio: hid-sensor-rotation: Add geomagnetic orientation sensor hid support.

2017-05-07T11:22:33+00:00

Geomagnetic orientation(AM) sensor is one kind of orientation 6dof sensor. It gives the device rotation in respect to the earth center and the magnetic north. The sensor is implemented through use of an accelerometer and magnetometer do not use gyroscope. It is a standard HID sensor. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Geomagnetic orientation(AM) sensor and dev rotation sensor have same channel and share channel usage id. So the most of the code for relative orientation sensor can be reused. Signed-off-by: Song Hongyan Signed-off-by: Jonathan Cameron

iio: hid-sensor-rotation: Add relative orientation sensor hid support

2017-05-07T11:22:27+00:00

Relative orientation(AG) sensor is a 6dof orientation sensor, it depends on acceleration and gyroscope sensor data. It gives a quaternion describing the orientation of the device relative to an initial orientation. It is a standard HID sensor. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Relative orientation(AG) sensor and dev rotation sensor have same channels and share channel usage id. So the most of the code for relative orientation sensor can be reused. Signed-off-by: Song Hongyan Reviewed-by: Andy Shevchenko Reviewed-by: Xu Even Acked-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

iio: hid: Add humidity sensor support

2017-03-25T16:32:24+00:00

Environmental humidity sensor is a hid defined sensor, it shows raw humidity measurement of air. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR39b.pdf According to IIO ABI definition, humidityrelative data output unit is milli percent. Add the unit convert from percent to milli percent. Signed-off-by: Song Hongyan Signed-off-by: Jonathan Cameron

iio: hid: Add temperature sensor support

2017-03-04T18:45:26+00:00

Environmental temperature sensor is a hid defined sensor, it measures temperature. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR39b.pdf According to IIO ABI definition, IIO_TEMP data output unit is milli degrees Celsius. Add the unit convert from degree to milli degree. Signed-off-by: Song Hongyan Acked-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

iio: Add gravity sensor support

2017-01-05T13:07:24+00:00

Gravity sensor is a soft sensor, which derives value from standard accelerometer device by filtering out the acceleration which is not caused by gravity. Gravity sensor provides a three dimensional vector indicating the direction and magnitude of gravity. Typically, this sensor is used to determine the device's relative orientation in space. The units and the coordinate system is the same as the one used by the acceleration sensor. When a device is at rest, the output of the gravity sensor should be identical to that of the accelerometer. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Gravity sensor and accelerometer have similar channels and share channel usage ids. So the most of the code for accel_3d can be reused. Signed-off-by: Song Hongyan Acked-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron