kernel/linux.git/include/linux/gpio, branch v4.18.17

gpio: Assign gpio_irq_chip::parents to non-stack pointer

2018-11-04T13:51:50+00:00

[ Upstream commit 3e779a2e7f909015f21428b66834127496110b6d ] gpiochip_set_cascaded_irqchip() is passed 'parent_irq' as an argument and then the address of that argument is assigned to the gpio chips gpio_irq_chip 'parents' pointer shortly thereafter. This can't ever work, because we've just assigned some stack address to a pointer that we plan to dereference later in gpiochip_irq_map(). I ran into this issue with the KASAN report below when gpiochip_irq_map() tried to setup the parent irq with a total junk pointer for the 'parents' array. BUG: KASAN: stack-out-of-bounds in gpiochip_irq_map+0x228/0x248 Read of size 4 at addr ffffffc0dde472e0 by task swapper/0/1 CPU: 7 PID: 1 Comm: swapper/0 Not tainted 4.14.72 #34 Call trace: [] dump_backtrace+0x0/0x718 [] show_stack+0x20/0x2c [] __dump_stack+0x20/0x28 [] dump_stack+0x80/0xbc [] print_address_description+0x70/0x238 [] kasan_report+0x1cc/0x260 [] __asan_report_load4_noabort+0x2c/0x38 [] gpiochip_irq_map+0x228/0x248 [] irq_domain_associate+0x114/0x2ec [] irq_create_mapping+0x120/0x234 [] irq_create_fwspec_mapping+0x4c8/0x88c [] irq_create_of_mapping+0x180/0x210 [] of_irq_get+0x138/0x198 [] spi_drv_probe+0x94/0x178 [] driver_probe_device+0x51c/0x824 [] __device_attach_driver+0x148/0x20c [] bus_for_each_drv+0x120/0x188 [] __device_attach+0x19c/0x2dc [] device_initial_probe+0x20/0x2c [] bus_probe_device+0x80/0x154 [] device_add+0x9b8/0xbdc [] spi_add_device+0x1b8/0x380 [] spi_register_controller+0x111c/0x1378 [] spi_geni_probe+0x4dc/0x6f8 [] platform_drv_probe+0xdc/0x130 [] driver_probe_device+0x51c/0x824 [] __driver_attach+0x100/0x194 [] bus_for_each_dev+0x104/0x16c [] driver_attach+0x48/0x54 [] bus_add_driver+0x274/0x498 [] driver_register+0x1ac/0x230 [] __platform_driver_register+0xcc/0xdc [] spi_geni_driver_init+0x1c/0x24 [] do_one_initcall+0x240/0x3dc [] kernel_init_freeable+0x378/0x468 [] kernel_init+0x14/0x110 [] ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffffffbf037791c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffffbf037791e0 ffffffbf037791e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffc0dde47180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0dde47200: f1 f1 f1 f1 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f2 f2 >ffffffc0dde47280: f2 f2 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 ^ ffffffc0dde47300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0dde47380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Let's leave around one unsigned int in the gpio_irq_chip struct for the single parent irq case and repoint the 'parents' array at it. This way code is left mostly intact to setup parents and we waste an extra few bytes per structure of which there should be only a handful in a system. Cc: Evan Green Cc: Thierry Reding Cc: Grygorii Strashko Fixes: e0d897289813 ("gpio: Implement tighter IRQ chip integration") Signed-off-by: Stephen Boyd Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

gpio: Remove VLA from gpiolib

2018-05-23T12:01:03+00:00

The new challenge is to remove VLAs from the kernel (see https://lkml.org/lkml/2018/3/7/621) to eventually turn on -Wvla. Using a kmalloc array is the easy way to fix this but kmalloc is still more expensive than stack allocation. Introduce a fast path with a fixed size stack array to cover most chip with gpios below some fixed amount. The slow path dynamically allocates an array to cover those chips with a large number of gpios. Reviewed-by: Geert Uytterhoeven Reviewed-by: Phil Reid Reviewed-and-tested-by: Lukas Wunner Signed-off-by: Lukas Wunner Signed-off-by: Laura Abbott Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij

gpiolib: add hogs support for machine code

2018-05-16T12:35:24+00:00

Board files constitute a significant part of the users of the legacy GPIO framework. In many cases they only export a line and set its desired value. We could use GPIO hogs for that like we do for DT and ACPI but there's no support for that in machine code. This patch proposes to extend the machine.h API with support for registering hog tables in board files. Signed-off-by: Bartosz Golaszewski Signed-off-by: Linus Walleij

gpiolib: Support 'gpio-reserved-ranges' property

2018-03-27T13:34:20+00:00

Some qcom platforms make some GPIOs or pins unavailable for use by non-secure operating systems, and thus reading or writing the registers for those pins will cause access control issues. Add support for a DT property to describe the set of GPIOs that are available for use so that higher level OSes are able to know what pins to avoid reading/writing. Non-DT platforms can add support by directly updating the chip->valid_mask. Signed-off-by: Stephen Boyd Signed-off-by: Stephen Boyd Tested-by: Timur Tabi Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij

Merge tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2018-01-31T20:25:27+00:00

Pull GPIO updates from Linus Walleij: "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is pretty calm this time around I think. I even got time to get to things like starting to clean up header includes. Core changes: - Disallow open drain and open source flags to be set simultaneously. This doesn't make electrical sense, and would the hardware actually respond to this setting, the result would be short circuit. - ACPI GPIO has a new core infrastructure for handling quirks. The quirks are there to deal with broken ACPI tables centrally instead of pushing the work to individual drivers. In the world of BIOS writers, the ACPI tables are perfect. Until they find a mistake in it. When such a mistake is found, we can patch it with a quirk. It should never happen, the problem is that it happens. So we accomodate for it. - Several documentation updates. - Revert the patch setting up initial direction state from reading the device. This was causing bad things for drivers that can't read status on all its pins. It is only affecting debugfs information quality. - Label descriptors with the device name if no explicit label is passed in. - Pave the ground for transitioning SPI and regulators to use GPIO descriptors by implementing some quirks in the device tree GPIO parsing code. New drivers: - New driver for the Access PCIe IDIO 24 family. Other: - Major refactorings and improvements to the GPIO mockup driver used for test and verification. - Moved the AXP209 driver over to pin control since it gained a pin control back-end. These patches will appear (with the same hashes) in the pin control pull request as well. - Convert the onewire GPIO driver w1-gpio to use descriptors. This is merged here since the W1 maintainers send very few pull requests and he ACKed it. - Start to clean up driver headers using to just use as appropriate" * tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits) gpio: Timestamp events in hardirq handler gpio: Fix kernel stack leak to userspace gpio: Fix a documentation spelling mistake gpio: Documentation update gpiolib: remove redundant initialization of pointer desc gpio: of: Fix NPE from OF flags gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe() gpio: stmpe: Move an assignment in stmpe_gpio_probe() gpio: stmpe: Improve a size determination in stmpe_gpio_probe() gpio: stmpe: Use seq_putc() in stmpe_dbg_show() gpio: No NULL owner gpio: stmpe: i2c transfer are forbiden in atomic context gpio: davinci: Include proper header gpio: da905x: Include proper header gpio: cs5535: Include proper header gpio: crystalcove: Include proper header gpio: bt8xx: Include proper header gpio: bcm-kona: Include proper header gpio: arizona: Include proper header gpio: amd8111: Include proper header ...

gpio: Export devm_gpiod_get_from_of_node() for consumers

2018-01-12T10:05:24+00:00

We have been holding back on adding an API for fetching GPIO handles directly from device nodes, strongly preferring to get it from the spawn devices instead. The fwnode interface however already contains an API for doing this, as it is used for opaque device tree nodes or ACPI nodes for getting handles to LEDs and keys that use GPIO: those are specified as one child per LED/key in the device tree and are not individual devices. However regulators present a special problem as they already have helper functions to traverse the device tree from a regulator node and two levels down to fill in data, and as it already traverses GPIO nodes in its own way, and already holds a pointer to each regulators device tree node, it makes most sense to export an API to fetch the GPIO descriptor directly from the node. We only support the devm_* version for now, hopefully no non-devres version will be needed. Signed-off-by: Linus Walleij

gpiolib: Export gpiochip_irqchip_irq_valid() to drivers

2018-01-10T13:21:25+00:00

Some pinctrl drivers can use the gpiochip irq valid information to figure out if certain gpios are exposed to the kernel for usage or not. Expose this API so we can use it in the pinmux_ops::request ops. Signed-off-by: Stephen Boyd Acked-by: Bjorn Andersson Signed-off-by: Linus Walleij

kernel/irq: Extend lockdep class for request mutex

2017-12-28T11:26:35+00:00

The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn Signed-off-by: Thomas Gleixner Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch

gpio: gpiolib: Generalise state persistence beyond sleep

2017-12-02T21:42:34+00:00

General support for state persistence is added to gpiolib with the introduction of a new pinconf parameter to propagate the request to hardware. The existing persistence support for sleep is adapted to include hardware support if the GPIO driver provides it. Persistence continues to be enabled by default; in-kernel consumers can opt out, but userspace (currently) does not have a choice. The *_SLEEP_MAY_LOSE_VALUE and *_SLEEP_MAINTAIN_VALUE symbols are renamed, dropping the SLEEP prefix to reflect that the concept is no longer sleep-specific. I feel that renaming to just *_MAY_LOSE_VALUE could initially be misinterpreted, so I've further changed the symbols to *_TRANSITORY and *_PERSISTENT to address this. The sysfs interface is modified only to keep consistency with the chardev interface in enforcing persistence for userspace exports. Signed-off-by: Andrew Jeffery Reviewed-by: Charles Keepax Acked-by: Rob Herring Signed-off-by: Linus Walleij

Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2017-11-15T01:52:21+00:00

Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...