kernel/linux.git/include/linux/gpio/consumer.h, branch v6.19.11

Merge tag 'gpio/shared-gpios-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next

2025-11-17T09:37:37+00:00

Immutable branch between the GPIO, ASoC and regulator trees for v6.19-rc1 Add better support for GPIOs shared by multiple consumers.

gpio: provide gpiod_is_shared()

2025-11-17T09:16:51+00:00

Provide an interface allowing consumers to check if a GPIO descriptor represents a GPIO that can potentially be shared by multiple consumers at the same time. This is exposed to allow subsystems that already work around the limitations of the current non-exclusive GPIO handling in some ways, to gradually convert to relying on the new shared GPIO feature of GPIOLIB. Extend the gpiolib-shared module to mark the GPIO shared proxy descriptors with a flag checked by the new interface. Reviewed-by: Linus Walleij Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-6-b51f97b1abd8@linaro.org Signed-off-by: Bartosz Golaszewski

gpio: export gpiod_hwgpio()

2025-10-21T08:35:58+00:00

Reading the GPIO hardware number from a descriptor is a valid use-case outside of the GPIO core. Export the symbol to consumers of GPIO descriptors. Reviewed-by: Linus Walleij Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20251016-aspeed-gpiolib-include-v1-2-31201c06d124@linaro.org Signed-off-by: Bartosz Golaszewski

gpio: constify arguments of gpiod_is_equal()

2025-06-30T06:58:26+00:00

This function is not meant to modify the GPIO descriptors in any way so we can safely constify both arguments. Link: https://lore.kernel.org/r/20250620-gpiod-is-equal-improv-v1-1-a75060505d2c@linaro.org Signed-off-by: Bartosz Golaszewski

Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2025-05-27T22:22:01+00:00

Pull gpio updates from Bartosz Golaszewski: "We have three new drivers, some refactoring in the GPIO core, lots of various changes across many drivers, new configfs interface for the virtual gpio-aggregator module and DT-bindings updates. The treewide conversion of GPIO drivers to using the new value setter callbacks is ongoing with another round of GPIO drivers updated. You will also see these commits coming in from other subsystems as with the relevant changes merged into mainline last cycle, I've started converting GPIO providers located elsewhere than drivers/gpio/. GPIO core: - use more lock guards where applicable - refactor GPIO ACPI code and shrink it in the process by 8% - move GPIO ACPI quirks into a separate file - remove unneeded #ifdef - convert GPIO devres helpers to using devm_add_action() where applicable which shrinks and simplifies the code - refactor GPIO descriptor validation in GPIO consumer interfaces - don't allow setting values on input lines in the GPIO core which will take off the burden from GPIO drivers of checking this down the line - provide gpiod_is_equal() as a way of safely comparing two GPIO descriptors (the only current user is in regulator core) New drivers: - add the GPIO module for the max77759 multifunction device - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller - add the GPIO driver for the Spacemit K1 SoC Driver improvements: - convert more drivers to using the new GPIO line value setter callbacks - convert more drivers to making the irq_chip immutable as is recommended by the interrupt subsystem - extend build testing coverage by enabling more modules to be built with COMPILE_TEST=y - extend the gpio-aggregator module with a configfs interface that makes the setup easier for user-space than the existing driver-level sysfs attributes and also adds more advanced configuration features (such as referring to aggregated lines by their original names or modifying their names as exposed by the aggregated chip) - add a missing mutex_destroy() in gpio-imx-scu - add an OF polarity quirk for s5m8767 - allow building gpio-vf610 as a loadable module - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS interface disabled (another small step towards getting rid of the global GPIO numberspace) - add support for level-triggered interrupts to gpio-pca953x - don't double-check the ngpios property in gpio-ds4520 as GPIO core already does it - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core already does it - remove unused callbacks from gpio-max3191x DT bindings: - add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new drivers added this cycle) - document more properties for gpio-vf610 and gpio-tegra186 - document a new pca95xx variant - fix style of examples in several GPIO DT-binding documents Misc: - TODO list updates" * tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits) gpio: timberdale: select GPIOLIB_IRQCHIP gpio: lpc18xx: select GPIOLIB_IRQCHIP gpio: grgpio: select GPIOLIB_IRQCHIP gpio: bcm-kona: select GPIOLIB_IRQCHIP dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges gpio: davinci: select GPIOLIB_IRQCHIP gpiolib-acpi: Update file references in the Documentation and MAINTAINERS gpiolib: acpi: Move quirks to a separate file gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter gpiolib: acpi: Handle deferred list via new API gpiolib: acpi: Make sure we fill struct acpi_gpio_info gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list() gpiolib: acpi: Use temporary variable for struct acpi_gpio_info gpiolib: remove unneeded #ifdef gpio: mpc8xxx: select GPIOLIB_IRQCHIP gpio: pxa: select GPIOLIB_IRQCHIP gpio: pxa: Make irq_chip immutable gpio: timberdale: Make irq_chip immutable gpio: xgene-sb: Make irq_chip immutable gpio: davinci: Make irq_chip immutable ...

Merge tag 'intel-gpio-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next

2025-05-21T10:04:30+00:00

intel-gpio for v6.16-1 * Split GPIO ACPI quirks to its own file * Refactored GPIO ACPI library to shrink the code The following is an automated git shortlog grouped by driver: gpiolib: - acpi: Update file references in the Documentation and MAINTAINERS - acpi: Move quirks to a separate file - acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter - acpi: Handle deferred list via new API - acpi: Make sure we fill struct acpi_gpio_info - acpi: Switch to use enum in acpi_gpio_in_ignore_list() - acpi: Use temporary variable for struct acpi_gpio_info - acpi: Deduplicate some code in __acpi_find_gpio() - acpi: Reuse struct acpi_gpio_params in struct acpi_gpio_lookup - acpi: Rename par to params for better readability - acpi: Reduce memory footprint for struct acpi_gpio_params - acpi: Remove index parameter from acpi_gpio_property_lookup() - acpi: Improve struct acpi_gpio_info memory footprint

gpio: provide gpiod_is_equal()

2025-04-09T07:32:06+00:00

There are users in the kernel that directly compare raw GPIO descriptor pointers in order to determine whether they refer to the same physical GPIO pin. This accidentally works like this but is not guaranteed by any API contract. Let's provide a comparator function that hides the actual logic. Reviewed-by: Mark Brown Link: https://lore.kernel.org/r/20250407-gpiod-is-equal-v1-1-7d85f568ae6e@linaro.org Signed-off-by: Bartosz Golaszewski

gpio: deprecate the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag

2025-04-08T08:41:58+00:00

The non-exclusive GPIO request flag looks like a functional feature but is in fact a workaround for a corner-case that got out of hand. It should be removed so deprecate it officially so that nobody uses it anymore. Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-1-7c1380797b0d@linaro.org Signed-off-by: Bartosz Golaszewski

gpiolib: acpi: Reduce memory footprint for struct acpi_gpio_params

2025-04-07T06:38:39+00:00

The line_index member in the struct acpi_gpio_params replicates what is covered in the ACPI GpioIo() or GpioInt() resource. The value there is limited to 16-bit one, so we don't really need to have a full 32-bit storage for it. Together with followed boolean the structure will be smaller. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3 (-3) Function old new delta acpi_gpio_property_lookup 417 414 -3 Total: Before=15361, After=15358, chg -0.02% `pahole` difference before and after: - /* size: 12, cachelines: 1, members: 3 */ - /* padding: 3 */ + /* size: 8, cachelines: 1, members: 3 */ + /* padding: 1 */ Acked-by: Mika Westerberg Link: https://lore.kernel.org/r/20250403160034.2680485-4-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko

gpiolib: make value setters have return values

2025-02-26T10:17:39+00:00

Change the in-kernel consumer interface for GPIOs: make all variants of value setters that don't have a return value, return a signed integer instead. That will allow these routines to indicate failures to callers. This doesn't change the implementation just yet, we'll do it in subsequent commits. We need to update the gpio-latch module as it passes the address of value setters as a function pointer argument and thus cares about its type. Reviewed-by: Linus Walleij Acked-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-2-bc4cfd38dae3@linaro.org Signed-off-by: Bartosz Golaszewski