kernel/linux.git/include/linux/gpio/consumer.h, branch v4.14.78

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2017-05-04T19:05:32+00:00

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.12 kernel cycle. Core changes: - Return NULL from gpiod_get_optional() when GPIOLIB is disabled. This was a much discussed change. It affects use cases where people write drivers that might or might not be using GPIO resources. I have decided that this is the lesser evil right now. - Make gpiod_count() behave consistently across different hardware descriptions. - Fix the syntax around open drain/open source to not infer active high/low semantics. New drivers: - A new single-register fixed-direction framework driver for hardware that have lines controlled by a single register that just work in one direction (out or in), including IRQ support. - Support the Fintek F71889A GPIO SuperIO controller. - Support the National NI 169445 MMIO GPIO. - Support for the X-Gene derivative of the DWC GPIO controller - Support for the Rohm BD9571MWV-M PMIC GPIO controller. - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver and replace both the Gemini and the Moxa ART custom drivers with this driver. Driver improvements: - A whole slew of drivers have their spinlocks chaned to raw spinlocks as they provide irqchips, and thus we are progressing on realtime compliance. - Use devm_irq_alloc_descs() in a slew of drivers, getting managed resources. - Support for the embedded PWM controller inside the MVEBU driver. - Debounce, open source and open drain support for the Aspeed driver. - Misc smaller fixes like spelling and syntax and whatnot" * tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: f7188x: Add a missing break gpio: omap: return error if requested debounce time is not possible gpio: Add ROHM BD9571MWV-M PMIC GPIO driver gpio: gpio-wcove: fix GPIO IRQ status mask gpio: DT bindings, move tca9554 from pcf857x to pca953x gpio: move tca9554 from pcf857x to pca953x gpio: arizona: Correct check whether the pin is an input gpio: Add XRA1403 DTS binding documentation dt-bindings: add exar to vendor prefixes list gpio: gpio-wcove: fix irq pending status bit width gpio: dwapb: use dwapb_read instead of readl_relaxed gpio: aspeed: Add open-source and open-drain support gpio: aspeed: Add debounce support gpio: aspeed: dt: Add optional clocks property gpio: aspeed: dt: Fix description alignment in bindings document gpio: mvebu: Add limited PWM support gpio: Use unsigned int for interrupt numbers gpio: f7188x: Add F71889A GPIO support. gpio: core: Decouple open drain/source flag with active low/high gpio: arizona: Correct handling for reading input GPIOs ...

gpio: return NULL from gpiod_get_optional when GPIOLIB is disabled

2017-03-15T10:16:30+00:00

Given the intent behind gpiod_get_optional() and friends it does not make sense to return -ENOSYS when GPIOLIB is disabled: the driver is expected to work just fine without gpio so let's behave as if gpio was not found. Otherwise we have to special-case -ENOSYS in drivers. Note that there was objection that someone might forget to enable GPIOLIB when dealing with a platform that has device that actually specifies optional gpio and we'll break it. I find this unconvincing as that would have to be the *only GPIO* in the system, which is extremely unlikely. Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Walleij

serial: st-asc: Use new GPIOD API to obtain RTS pin

2017-03-14T09:36:41+00:00

The commits mentioned below adapt the GPIO API to allow more information to be passed directly through devm_get_gpiod_from_child() in the first instance. This facilitates the removal of subsequent calls, such as gpiod_direction_output(). This patch firstly moves to utilise the new API and secondly removes the now superfluous call do set the direction. Reported-by: Stephen Rothwell Suggested-by: Boris Brezillon Signed-off-by: Lee Jones [Also drop the header file dummies that only this driver was using] Acked-by: Greg Kroah-Hartman Signed-off-by: Linus Walleij

gpio: reintroduce devm_get_gpiod_from_child()

2017-02-21T13:19:45+00:00

We need to keep this API around for the merge window to avoid nasty build problems in the merges. Cc: Lee Jones Suggested-by: Greg Kroah-Hartman Signed-off-by: Linus Walleij

gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper

2017-02-04T20:28:51+00:00

devm_fwnode_get_gpiod_from_child() currently allows GPIO users to request a GPIO that is defined in a child fwnode instead of directly in the device fwnode. Extend this API by adding the devm_fwnode_get_index_gpiod_from_child() helper which does the same except you can also specify an index in case the 'xx-gpios' property describe several GPIOs. Signed-off-by: Boris Brezillon Signed-off-by: Linus Walleij

gpio: Rename devm_get_gpiod_from_child()

2017-02-04T20:27:26+00:00

Rename devm_get_gpiod_from_child() into devm_fwnode_get_gpiod_from_child() to reflect the fact that this function is operating on a fwnode object. Signed-off-by: Boris Brezillon Acked-by: Jacek Anaszewski Acked-by: Dmitry Torokhov Signed-off-by: Linus Walleij

gpio: Pass GPIO label down to gpiod_request

2017-01-26T08:59:52+00:00

Currently all users of fwnode_get_named_gpiod() have no way to specify a label for the GPIO. So GPIOs listed in debugfs are shown with label "?". With this change a proper label is used. Also adjust all users so they can pass a label, properly retrieved from device tree properties. Signed-off-by: Alexander Stein Cc: Andy Shevchenko Acked-by: Jacek Anaszewski Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Dmitry Torokhov Signed-off-by: Linus Walleij

gpiolib: Convert fwnode_get_named_gpiod() to configure GPIO

2017-01-26T08:59:32+00:00

Make fwnode_get_named_gpiod() consistent with the rest of gpiod_get() like API, i.e. configure GPIO pin immediately after request. Besides obvious clean up it will help to configure pins based on firmware provided resources. Reviewed-by: Mika Westerberg Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij

gpio: keep the GPIO line names internal

2015-09-24T17:48:53+00:00

This refactors the changes to the GPIO line naming mechanism to not have so widespread effects, instead we conclude the patch series by having created a name attribute in the GPIO descriptor, that need not be globally unique, and it will be initialized from the old .names array in struct gpio_chip if it exists, then used in the legacy sysfs code like the array was used previously. The associated changes to name lines from the device tree are controversial and need to stand alone from this. Resulting changes: 1. Remove the export and the header for the gpio_name_to_desc() as so far the only use is inside gpiolib.c. Staticize gpio_name_to_desc() and move it above the only function using it. 2. Only print a warning if there are two GPIO lines with the same name. The reason is to preserve current behaviour: before the previous changes to the naming mechanism this would not reject probing the driver, instead the error would occur when trying to export the line in sysfs, so restore this behaviour, but print a friendly warning if names collide. Cc: Johan Hovold Cc: Markus Pargmann Signed-off-by: Linus Walleij