kernel/linux.git/include/linux/futex.h, branch v6.6.132

futex: Fix inode life-time issue

2020-03-06T10:06:15+00:00

As reported by Jann, ihold() does not in fact guarantee inode persistence. And instead of making it so, replace the usage of inode pointers with a per boot, machine wide, unique inode identifier. This sequence number is global, but shared (file backed) futexes are rare enough that this should not become a performance issue. Reported-by: Jann Horn Suggested-by: Linus Torvalds Signed-off-by: Peter Zijlstra (Intel)

futex: Add mutex around futex exit

2019-11-20T08:40:10+00:00

The mutex will be used in subsequent changes to replace the busy looping of a waiter when the futex owner is currently executing the exit cleanup to prevent a potential live lock. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20191106224556.845798895@linutronix.de

futex: Mark the begin of futex exit explicitly

2019-11-20T08:40:09+00:00

Instead of relying on PF_EXITING use an explicit state for the futex exit and set it in the futex exit function. This moves the smp barrier and the lock/unlock serialization into the futex code. As with the DEAD state this is restricted to the exit path as exec continues to use the same task struct. This allows to simplify that logic in a next step. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20191106224556.539409004@linutronix.de

futex: Split futex_mm_release() for exit/exec

2019-11-20T08:40:08+00:00

To allow separate handling of the futex exit state in the futex exit code for exit and exec, split futex_mm_release() into two functions and invoke them from the corresponding exit/exec_mm_release() callsites. Preparatory only, no functional change. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20191106224556.332094221@linutronix.de

futex: Replace PF_EXITPIDONE with a state

2019-11-20T08:40:07+00:00

The futex exit handling relies on PF_ flags. That's suboptimal as it requires a smp_mb() and an ugly lock/unlock of the exiting tasks pi_lock in the middle of do_exit() to enforce the observability of PF_EXITING in the futex code. Add a futex_state member to task_struct and convert the PF_EXITPIDONE logic over to the new state. The PF_EXITING dependency will be cleaned up in a later step. This prepares for handling various futex exit issues later. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20191106224556.149449274@linutronix.de

futex: Move futex exit handling into futex code

2019-11-20T08:40:07+00:00

The futex exit handling is #ifdeffed into mm_release() which is not pretty to begin with. But upcoming changes to address futex exit races need to add more functionality to this exit code. Split it out into a function, move it into futex code and make the various futex exit functions static. Preparatory only and no functional change. Folded build fix from Borislav. Signed-off-by: Thomas Gleixner Reviewed-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20191106224556.049705556@linutronix.de

y2038: futex: Move compat implementation into futex.c

2018-12-07T21:19:07+00:00

We are going to share the compat_sys_futex() handler between 64-bit architectures and 32-bit architectures that need to deal with both 32-bit and 64-bit time_t, and this is easier if both entry points are in the same file. In fact, most other system call handlers do the same thing these days, so let's follow the trend here and merge all of futex_compat.c into futex.c. In the process, a few minor changes have to be done to make sure everything still makes sense: handle_futex_death() and futex_cmpxchg_enabled() become local symbol, and the compat version of the fetch_robust_entry() function gets renamed to compat_fetch_robust_entry() to avoid a symbol clash. This is intended as a purely cosmetic patch, no behavior should change. Signed-off-by: Arnd Bergmann

mm: use do_futex() instead of sys_futex() in mm_release()

2018-04-02T18:15:02+00:00

sys_futex() is a wrapper to do_futex() which does not modify any values here: - uaddr, val and val3 are kept the same - op is masked with FUTEX_CMD_MASK, but is always set to FUTEX_WAKE. Therefore, val2 is always 0. - as utime is set to NULL, *timeout is NULL This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Darren Hart Cc: Andrew Morton Reviewed-by: Thomas Gleixner Signed-off-by: Dominik Brodowski

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

futex: Allow for compiling out PI support

2017-08-01T12:36:35+00:00

This makes it possible to preserve basic futex support and compile out the PI support when RT mutexes are not available. Signed-off-by: Nicolas Pitre Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Darren Hart Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708010024190.5981@knanqh.ubzr