kernel/linux.git/include/linux/ftrace.h, branch v4.17.5

Merge tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

2018-01-29T17:08:34+00:00

Pull init_task initializer cleanups from David Howells: "It doesn't seem useful to have the init_task in a header file rather than in a normal source file. We could consolidate init_task handling instead and expand out various macros. Here's a series of patches that consolidate init_task handling: (1) Make THREAD_SIZE available to vmlinux.lds for cris, hexagon and openrisc. (2) Alter the INIT_TASK_DATA linker script macro to set init_thread_union and init_stack rather than defining these in C. Insert init_task and init_thread_into into the init_stack area in the linker script as appropriate to the configuration, with different section markers so that they end up correctly ordered. We can then get merge ia64's init_task.c into the main one. We then have a bunch of single-use INIT_*() macros that seem only to be macros because they used to be used per-arch. We can then expand these in place of the user and get rid of a few lines and a lot of backslashes. (3) Expand INIT_TASK() in place. (4) Expand in place various small INIT_*() macros that are defined conditionally. Expand them and surround them by #if[n]def/#endif in the .c file as it takes fewer lines. (5) Expand INIT_SIGNALS() and INIT_SIGHAND() in place. (6) Expand INIT_STRUCT_PID in place. These macros can then be discarded" * tag 'init_task-20180117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: Expand INIT_STRUCT_PID and remove Expand the INIT_SIGNALS and INIT_SIGHAND macros and remove Expand various INIT_* macros and remove Expand INIT_TASK() in init/init_task.c and remove Construct init thread stack in the linker script rather than by union openrisc: Make THREAD_SIZE available to vmlinux.lds hexagon: Make THREAD_SIZE available to vmlinux.lds cris: Make THREAD_SIZE available to vmlinux.lds

ftrace, orc, x86: Handle ftrace dynamically allocated trampolines

2018-01-23T20:56:55+00:00

The function tracer can create a dynamically allocated trampoline that is called by the function mcount or fentry hook that is used to call the function callback that is registered. The problem is that the orc undwinder will bail if it encounters one of these trampolines. This breaks the stack trace of function callbacks, which include the stack tracer and setting the stack trace for individual functions. Since these dynamic trampolines are basically copies of the static ftrace trampolines defined in ftrace_*.S, we do not need to create new orc entries for the dynamic trampolines. Finding the return address on the stack will be identical as the functions that were copied to create the dynamic trampolines. When encountering a ftrace dynamic trampoline, we can just use the orc entry of the ftrace static function that was copied for that trampoline. Signed-off-by: Steven Rostedt (VMware)

Expand various INIT_* macros and remove

2018-01-17T11:30:16+00:00

Expand various INIT_* macros into the single places they're used in init/init_task.c and remove them. Signed-off-by: David Howells Tested-by: Tony Luck Tested-by: Will Deacon (arm64) Tested-by: Palmer Dabbelt Acked-by: Thomas Gleixner

Merge tag 'trace-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-11-17T22:58:01+00:00

Pull tracing updates from - allow module init functions to be traced - clean up some unused or not used by config events (saves space) - clean up of trace histogram code - add support for preempt and interrupt enabled/disable events - other various clean ups * tag 'trace-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits) tracing, thermal: Hide cpu cooling trace events when not in use tracing, thermal: Hide devfreq trace events when not in use ftrace: Kill FTRACE_OPS_FL_PER_CPU perf/ftrace: Small cleanup perf/ftrace: Fix function trace events perf/ftrace: Revert ("perf/ftrace: Fix double traces of perf on ftrace:function") tracing, dma-buf: Remove unused trace event dma_fence_annotate_wait_on tracing, memcg, vmscan: Hide trace events when not in use tracing/xen: Hide events that are not used when X86_PAE is not defined tracing: mark trace_test_buffer as __maybe_unused printk: Remove superfluous memory barriers from printk_safe ftrace: Clear hashes of stale ips of init memory tracing: Add support for preempt and irq enable/disable events tracing: Prepare to add preempt and irq trace events ftrace/kallsyms: Have /proc/kallsyms show saved mod init functions ftrace: Add freeing algorithm to free ftrace_mod_maps ftrace: Save module init functions kallsyms symbols for tracing ftrace: Allow module init functions to be traced ftrace: Add a ftrace_free_mem() function for modules to use tracing: Reimplement log2 ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ftrace: Kill FTRACE_OPS_FL_PER_CPU

2017-10-16T22:13:38+00:00

The one and only user of FTRACE_OPS_FL_PER_CPU is gone, remove the lot. Link: http://lkml.kernel.org/r/20171011080224.372422809@infradead.org Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Steven Rostedt (VMware)

tracing: Add support for preempt and irq enable/disable events

2017-10-10T22:58:43+00:00

Preempt and irq trace events can be used for tracing the start and end of an atomic section which can be used by a trace viewer like systrace to graphically view the start and end of an atomic section and correlate them with latencies and scheduling issues. This also serves as a prelude to using synthetic events or probes to rewrite the preempt and irqsoff tracers, along with numerous benefits of using trace events features for these events. Link: http://lkml.kernel.org/r/20171006005432.14244-3-joelaf@google.com Link: http://lkml.kernel.org/r/20171010225137.17370-1-joelaf@google.com Cc: Peter Zilstra Cc: kernel-team@android.com Signed-off-by: Joel Fernandes Signed-off-by: Steven Rostedt (VMware)

ftrace/kallsyms: Have /proc/kallsyms show saved mod init functions

2017-10-06T03:10:42+00:00

If a module is loaded while tracing is enabled, then there's a possibility that the module init functions were traced. These functions have their name and address stored by ftrace such that it can translate the function address that is written into the buffer into a human readable function name. As userspace tools may be doing the same, they need a way to map function names to their address as well. This is done through reading /proc/kallsyms. Signed-off-by: Steven Rostedt (VMware)

ftrace: Save module init functions kallsyms symbols for tracing

2017-10-05T21:57:33+00:00

If function tracing is active when the module init functions are freed, then store them to be referenced by kallsyms. As module init functions can now be traced on module load, they were useless: ># echo ':mod:snd_seq' > set_ftrace_filter ># echo function > current_tracer ># modprobe snd_seq ># cat trace # tracer: function # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | modprobe-2786 [000] .... 3189.037874: 0xffffffffa0860000 <-do_one_initcall modprobe-2786 [000] .... 3189.037876: 0xffffffffa086004d <-0xffffffffa086000f modprobe-2786 [000] .... 3189.037876: 0xffffffffa086010d <-0xffffffffa0860018 modprobe-2786 [000] .... 3189.037877: 0xffffffffa086011a <-0xffffffffa0860021 modprobe-2786 [000] .... 3189.037877: 0xffffffffa0860080 <-0xffffffffa086002a modprobe-2786 [000] .... 3189.039523: 0xffffffffa0860400 <-0xffffffffa0860033 modprobe-2786 [000] .... 3189.039523: 0xffffffffa086038a <-0xffffffffa086041c modprobe-2786 [000] .... 3189.039591: 0xffffffffa086038a <-0xffffffffa0860436 modprobe-2786 [000] .... 3189.039657: 0xffffffffa086038a <-0xffffffffa0860450 modprobe-2786 [000] .... 3189.039719: 0xffffffffa0860127 <-0xffffffffa086003c modprobe-2786 [000] .... 3189.039742: snd_seq_create_kernel_client <-0xffffffffa08601f6 When the output is shown, the kallsyms for the module init functions have already been freed, and the output of the trace can not convert them to their function names. Now this looks like this: # tracer: function # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | modprobe-2463 [002] .... 174.243237: alsa_seq_init <-do_one_initcall modprobe-2463 [002] .... 174.243239: client_init_data <-alsa_seq_init modprobe-2463 [002] .... 174.243240: snd_sequencer_memory_init <-alsa_seq_init modprobe-2463 [002] .... 174.243240: snd_seq_queues_init <-alsa_seq_init modprobe-2463 [002] .... 174.243240: snd_sequencer_device_init <-alsa_seq_init modprobe-2463 [002] .... 174.244860: snd_seq_info_init <-alsa_seq_init modprobe-2463 [002] .... 174.244861: create_info_entry <-snd_seq_info_init modprobe-2463 [002] .... 174.244936: create_info_entry <-snd_seq_info_init modprobe-2463 [002] .... 174.245003: create_info_entry <-snd_seq_info_init modprobe-2463 [002] .... 174.245072: snd_seq_system_client_init <-alsa_seq_init modprobe-2463 [002] .... 174.245094: snd_seq_create_kernel_client <-snd_seq_system_client_init Signed-off-by: Steven Rostedt (VMware)

ftrace: Add a ftrace_free_mem() function for modules to use

2017-10-04T18:20:52+00:00

In order to be able to trace module init functions, the module code needs to tell ftrace what is being freed when the init sections are freed. Use the code that the main init calls to tell ftrace to free the main init sections. This requires passing in a start and end address to free. Signed-off-by: Steven Rostedt (VMware)