kernel/linux.git/include/linux/fsl, branch v7.3-rc1

Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2026-08-20T15:16:04+00:00

Pull networking updates from Jakub Kicinski: "One of the 'small improvements all over the place' releases for us. It's hard to draw any direct comparisons because summer vacations disrupted our patch processing (and presumably - generation) quite a bit. Quick and dirty count suggests we (Paolo and I) merged a very similar number of net (632) and net-next (648) patches. This is not telling the full story either because 1/3 to 1/2 of the net-next patches also *seem* like AI-driven low priority fixes, cleanups and clarifications. We are completely overwhelmed, of course. The glimmer of hope is that we secured sufficient LLM budget and access (thank you Meta!) to run reviews with multiple frontier models on each patch. This eliminates some hallucinations. That said, in terms of review, the LLMs can only do so much. The sad truth is that our APIs (especially for rare events like PCIe errors, timeouts etc) have always been racy, and now LLMs don't let us ignore that. I expect our direction for the next release will be to tweak the reviews a little bit more, but start shifting focus to letting the LLMs take care of the busy work - managing patchwork, automating common process complaints, editing commit messages, and maybe applying patches which already got "reviewed-by" tags from people we trust... Core & protocols: - A few steps lowering rtnl_lock dependence: - per-netns netdev unregistration for select SW drivers (e.g. veth, ipvlan, tunnels) - rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE) - prepare software drivers and TC qdiscs for rtnl_lock-less GET - Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve) - Support buffers larger than PAGE_SIZE in devmem zero-copy API - Improve MPTCP handling of extreme memory pressure handling, when out-of-order queue had to be pruned - Report the per-group user count via RTM_GETMULTICAST - Expose the route deletion reason in RTM_DELROUTE - Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more useful handling of LSM denials when receiving SCM_RIGHTS messages: instead of truncating the message at the first blocked fd, keep every fd slot and store the LSM errno in the blocked slot - IPv6 Segment Routing - support looking up the post-encap SID (address) in a different/specified routing table - Support PRP RedBox (interlink) creation - Support per-nexthop UDP dst port in VXLAN - Continue converting getsockopt callbacks in a number of protocols to iov_iter Ethernet: - Merge initial CXL support for AMD/Solarflare NICs (shared branch with the CXL tree) - New drivers: - ADIN1140 10BASE-T1S MACPHY - Initial skeleton of Intel iXD and ZTE Dinghai drivers - High-speed NICs: - AMD/Pensando: - support firmware flashing - Cisco (enic): - SR-IOV V2 admin channel and MBOX protocol - Huawei (hns3): - support for ethtool pfc_prevention_tout - nVidia/Mellanox: - support sharing bandwidth control across interfaces of the same device - Marvell (octeontx2-pf): - link RQ page pools to netdev for Netlink stats - Google vNIC: - XDP metadata support for DQ RDA - Microsoft vNIC: - support forcing full-page RX buffers - Other NICs: - Synopsys IP: - eic7700: support for eth1 - Microchip (lan743x): - support for RMII interface - Wangxun: - support for ethtool -G and -C for VFs - add Tx timeout and PCIe error handling - Intel (igb/igc): - RSS key get/set support - support for forcing link speed without auto-negotiation - Switches: - NXP (dpaa2): - support bonding/LAG offload - Mediatek: - mt7530: EN7528 support - initial support for MT7628 - Micrel (ksz8/9): - refactoring work to move towards library model - PTP support for KSZ8463 - nVidia/Mellanox: - support rtnl-lock-less ethtool callbacks - Realtek: - rtl8366rb: use generic RTL83xx code - support SGMII and HSGMII for RTL8367S - PHYs: - Airoha: - EcoNet EN7528 PHY support - DAPU Telecom - DAPU Telecom DAP8211R(I) Gigabit PHY support - Realtek: - support RTL8261C_CG - support RTL8261D Wireless: - nl80211: per-link statistics support for multi-link operation - mac80211: AQL/airtime-fairness support for multicast - Merge Peripheral Authentication Service (PAS) / TEE support for ath12k (shared branch with the firmware/qcom tree) - New drivers: - mm81x for Morse Micro Long-Range S1G devices - nxpwifi for NXP devices (mostly forked off from mwifiex) - Driver changes: - Broadcom (brcmfmac): - DPP support, some Cypress part update - MediaTek (mt76): - mt7928 support - mt7925 NAN support - mt7996 AP powersave improvements - Qualcomm (ath12k): - much kernel infrastructure integration work - AHB platform MultiPD support - Realtek (rt89): - LED support - RTL8922DE support - dual-BT coex for RTL8922D - Intel: - new FW version support Bluetooth: - HCI: add support for Shorter Connection Interval (SCI) feature - af_bluetooth: add minimal context analysis annotations - Driver changes: - Intel: - add Bluetooth SAR revision 2 support - add vendor_reset PCI sysfs for PLDR - Mediatek: - add USB IDs for MT7902 and MT7922 devices - Realtek: - add USB IDs for 8761CU and 8852BE devices - NXP: - add M.2 Bluetooth device support using pwrseq Misc: - DPLL support for manual/numerical oscillator control (NCO) (implement in zl3073x) - MCTP support for MCTP over USB v1.1 (DMTF DSP0283) - Power-over-Ethernet: support Realtek PSE controllers - Remove the IBM EHEA driver - Remove tulip/xircom_cb driver" * tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits) net/mlx5e: do not HW-GRO coalesce small frames net: openvswitch: fix nf_connlabels leak in ovs_ct_init net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() net: openvswitch: fix flow mask use-after-free on flow deletion sctp: stop processing a packet once its association is deleted dpll: zl3073x: add PTP clock support dpll: zl3073x: add channel ToD, phase step and TIE operations dpll: zl3073x: scale poll interval proportionally to timeout ptp: vmclock: prevent read-only mappings from becoming writable ipv4: reject undersized MTUs in ip_do_fragment() bonding: initialize err for empty target lists net: dsa: initial support for MT7628 embedded switch net: dsa: initial MT7628 tagging driver net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs dt-bindings: net: dsa: add MT7628 ESW net: pse-pd: realtek-pse-mcu: add UART transport net: pse-pd: realtek-pse-mcu: add I2C transport net: pse-pd: add Realtek PSE MCU core dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU vsock: use sock_error() to consume sk_err after a failed connect ...

Merge tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers

2026-08-10T08:15:56+00:00

FSL SOC Changes for 7.3 Freescale QUICC Engine: - Use generic I/O helpers in interrupt controller for IO Ports - Move CONFIG_QE_GPIO out of powerpc - Fix DT scan for GPIO nodes - Convert IO ports interrupt controller to generic IRQ chip - Add support of IRQs in GPIO controller - Implement get_direction() in GPIO controller - Check platform_driver_register() in interrupt controller for IO Ports Data Path I/O: - Replace maintainer - Remove redundant dev_err() - Fix kernel-doc typos Freescale Management Complex: - Use strscpy() to copy strings into arrays - Remove redundant dev_err() - Drop unused assignment of acpi_device_id::driver_data Other changes: - Add kernel and device tree binding support for RCW override, completing the SerDes PHY driver functionality - Fix kernel-doc warnings and typos in DPAA header * tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: (31 commits) bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data soc: fsl: qe: check platform_driver_register() in qe_ic_of_init() phy: lynx-10g: use RCW override procedure for dynamic protocol change soc: fsl: guts: implement the RCW override procedure dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region soc: fsl: guts: make fsl_soc_data available after fsl_guts_init() soc: fsl: guts: make it easier to determine on which SoC we are running soc: fsl: guts: add a central fsl_guts_read() function soc: fsl: guts: add a global structure to hold state soc: fsl: guts: use a macro to encode the DCFG CCSR space soc: fsl: guts: perform fsl_guts_init() error teardown in reverse order of setup soc: fsl: dpio: fix kernel-doc typos soc: fsl: fix kernel-doc warnings and typos bus: fsl-mc: Remove redundant dev_err() soc: fsl: qe: Add support of IRQs in QE GPIO soc: fsl: qe: Rename irq variable to parent_irq soc: fsl: qe: Convert to generic IRQ chip soc: fsl: qe: Handle spurious interrupts soc: fsl: qe: Iterate over all pending interrupts in cascade handler soc: fsl: qe: Use generic_handle_domain_irq() ... Signed-off-by: Arnd Bergmann

soc: fsl: guts: implement the RCW override procedure

2026-08-07T04:54:23+00:00

Add support for the RCW override procedure which enables runtime reconfiguration of the protocol running on a SerDes lane. The procedure is done through the DCFG DCSR space which now can be defined as the second memory region of the guts DT node. Support is added on the following SoCs: LS1046A, LS1088A, LS2088A. The procedure is exported to the "client" driver - the Lynx10G SerDes PHY driver - through the following functions: - fsl_guts_lane_validate() used to validate that changing the protocol on a specific lane is supported. - fsl_guts_lane_set_mode() which can be used to request the RCW procedure be executed for a specific lane. Since the RCW override procedure is different depending on the SoC, the private fsl_soc_data structure is updated with two new per SoC callbacks (.serdes_get_rcw_override() and .serdes_init_rcwcr()) which get used from the generic fsl_guts_lane_set_mode() function. These two callbacks hide all the SoC specific register offsets, masks and values so that the _set_mode() procedure is straightforward. Signed-off-by: Ioana Ciornei Signed-off-by: Vladimir Oltean Reviewed-by: Ioana Ciornei Link: https://lore.kernel.org/r/20260721231603.67865-9-vladimir.oltean@nxp.com Signed-off-by: Christophe Leroy (CS GROUP)

net: enetc: improve MAFT entry management with bitmap tracking

2026-07-27T23:31:53+00:00

Replace the counter-based MAFT entry tracking (num_mfe/mac_filter_num) with a bitmap (maft_eid_bitmap) stored in struct ntmp_user, which is a more appropriate place for NTMP resource management. The bitmap approach brings two improvements. First, the entry deletion in enetc4_pf_clear_maft_entries() now checks the return value of ntmp_maft_delete_entry() and only clears the corresponding bit on success, keeping hardware and software state in sync. Previously, the counter was reset unconditionally regardless of whether the hardware deletion actually succeeded. Second, entry allocation in enetc4_pf_add_maft_entries() uses ntmp_lookup_free_eid() to find available IDs dynamically, with an upfront capacity check via bitmap_weight() to avoid partial failures. The MAFT entry count is moved into ntmp_user.maft_num_entries and initialized once during enetc4_init_ntmp_user(). Helper functions enetc4_ntmp_bitmap_init() and enetc4_ntmp_bitmap_free() manage the bitmap lifetime. The debugfs show function is updated accordingly to iterate over set bits under rtnl_lock(). Signed-off-by: Wei Fang Link: https://patch.msgid.link/20260720014317.1059359-5-wei.fang@oss.nxp.com Signed-off-by: Jakub Kicinski

Replace by more specific (headers)

2026-07-03T05:38:16+00:00

is included in a many files: $ git grep '' ef0c9f75a195 | wc -l 1598 ; some of them are widely used headers. To stop mixing up different and unrelated driver( type)s let the subsystem headers only use the subset of the recently split that are relevant for them. The fallout (I hope) is addressed in the previous commits that handle sources relying on e.g. pulling in the full legacy header and thus providing pci_device_id. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2026-06-17T18:21:40+00:00

Pull SoC driver updates from Arnd Bergmann: "There are a few added drivers, but mostly the normal maintenance to drivers for firmware, memory controller and other soc specific hardware: - The NXP QuickEngine gets modern MSI support, which allows some cleanups to the GICv3 irqchip chip driver - A new SoC specific driver for the Renesas R-Car MFIS unit is added, encapsulating support for the on-chip mailbox and hwspinlock implementations that are not easily separated into individual drivers - The Qualcomm SoC drivers add support for additional SoC implementations, and flexibility around power management for the serial-engine driver as well as probing the LLCC driver using custom hardware descriptions inside of the device itself. - Added support for the Samsung thermal management unit - A cleanup to the Tegra 'PMC' driver interfaces to remove legacy APIs and allow multiple PMC instances everywhere. - Updates to the TI SCI and KNAS drivers to improve suspend/resume support. - Minor driver changes for mediatek, xilinx, allwinner, aspeed, tegra, broadcom, amd, microchip and starfive specific drivers - Memory controller updates for Tegra and Renesas for additional SoC types and other improvements. - Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to update driver probing, object lifetimes and address minor bugs" * tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits) Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface" Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers" memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate() memory: tegra264: drop redundant tegra264_mc_icc_aggregate() memory: tegra186-emc: stop borrowing MC aggregate hook for EMC soc: aspeed: cleanup dead default for ASPEED_SOCINFO firmware: tegra: bpmp: Add support for multi-socket platforms firmware: tegra: bpmp: Propagate debugfs errors soc/tegra: pmc: Add Tegra238 support soc/tegra: pmc: Restrict power-off handler to Nexus 7 soc/tegra: pmc: Populate powergate debugfs only when needed soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard soc/tegra: pmc: Remove unused legacy functions soc/tegra: pmc: Create PMC context dynamically firmware: samsung: acpm: remove compile-testing stubs firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper firmware: samsung: acpm: Add TMU protocol support firmware: samsung: acpm: Make acpm_ops const and access via pointer firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr ...

net: dsa: netc: add VLAN filter table and egress treatment management

2026-06-15T21:32:06+00:00

Implement the DSA .port_vlan_add and .port_vlan_del operations to enable VLAN-aware bridge offloading on the NETC switch. VLAN membership is maintained in the VLAN Filter Table (VFT). Adding the first port to a VLAN creates a new VFT entry with hardware MAC learning and flood-on-miss forwarding; subsequent ports update the existing entry's membership bitmap. Removing the last port deletes the entry. Egress tagging is handled through the Egress Treatment Table (ETT). Each VLAN is allocated a group of ETT entries, one per available port. Ports are assigned a sequential ett_offset during initialisation, used to address each port's entry within the group. Untagged ports configure the ETT to strip the outer VLAN tag; tagged ports pass frames through unmodified. Each ETT group is optionally paired with an Egress Counter Table (ECT) group for per-port frame counting, allocated on a best-effort basis. When the egress rule of an ETT entry changes, the counter of the corresponding ECT entry will be recounted to track the number of frames that match the new egress rule. A software shadow list serialised by vft_lock tracks active VLAN state across both port membership and egress tagging. VID 0 is used for single port mode and is ignored by both callbacks. Signed-off-by: Wei Fang Link: https://patch.msgid.link/20260611021458.2629145-8-wei.fang@oss.nxp.com Signed-off-by: Jakub Kicinski

net: enetc: add helpers to set/clear table bitmap

2026-06-15T21:32:06+00:00

NTMP index tables require software to allocate and manage entry IDs. Add two bitmap helper functions to facilitate this management: ntmp_lookup_free_eid(): finds the first zero bit in the given bitmap, sets it to mark the entry as in-use, and returns the corresponding entry ID. Returns NTMP_NULL_ENTRY_ID if no free entry is available. ntmp_clear_eid_bitmap(): clears the bit associated with the given entry ID in the bitmap to mark the entry as free. It is a no-op if the entry ID is NTMP_NULL_ENTRY_ID. Both functions are exported for use by other modules, such as the NETC switch driver which needs to manage group index bitmaps for the Egress Treatment Table (ETT) and Egress Count Table (ECT). Signed-off-by: Wei Fang Link: https://patch.msgid.link/20260611021458.2629145-7-wei.fang@oss.nxp.com Signed-off-by: Jakub Kicinski

net: dsa: netc: initialize the group bitmap of ETT and ECT

2026-06-15T21:32:06+00:00

The Egress Treatment Table (ETT) and Egress Count Table (ECT) are both index tables whose entry IDs are allocated by software. Every num_ports entries form a group, where each entry in the group corresponds to one port. To facilitate group allocation and management, initialize the group index bitmaps for both tables based on hardware capabilities reported by ETTCAPR and ECTCAPR registers. The bitmap size per table is calculated as the total number of hardware entries divided by the number of available ports, which gives the number of groups available for software allocation. A set bit in the bitmap represents a group index that has been allocated. These bitmaps will be used by subsequent patches that add VLAN support. Signed-off-by: Wei Fang Link: https://patch.msgid.link/20260611021458.2629145-6-wei.fang@oss.nxp.com Signed-off-by: Jakub Kicinski

net: enetc: add "Update" operation to the egress count table

2026-06-15T21:32:05+00:00

The egress count table is a static bounded index table, egress related statistics are maintained in this table. The table is implemented as a linear array of entries accessed using an index (0, 1, 2, ..., n) that uniquely identifies an entry within the array. Egress Counter Entry ID (EC_EID) is used as an index to an entry in this table. The EC_EID is specified in the egress treatment table. Egress count table entries are always present and enabled. The table only supports access via entry ID, which is assigned by the software. And it supports Update, Query and Query followed by Update operations. Currently, only Update operation is supported. Signed-off-by: Wei Fang Link: https://patch.msgid.link/20260611021458.2629145-5-wei.fang@oss.nxp.com Signed-off-by: Jakub Kicinski