kernel/linux.git/include/linux/fsl, branch v6.6.132

net: enetc: add missing static descriptor and inline keyword

2024-10-22T13:46:19+00:00

commit 1d7b2ce43d2c22a21dadaf689cb36a69570346a6 upstream. Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled. The detailed warnings are shown as follows. include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes] 62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) | ^ include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit 62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) | ^ | static 8 warnings generated. Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: stable@vger.kernel.org Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/ Signed-off-by: Wei Fang Reviewed-by: Claudiu Manoil Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bus: fsl-mc: Make remove function return void

2023-05-30T23:58:43+00:00

The value returned by an fsl-mc driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero and then device removal continues unconditionally.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König Reviewed-by: Ioana Ciornei Tested-by: Ioana Ciornei # sanity checks Reviewed-by: Laurentiu Tudor Tested-by: Laurentiu Tudor Signed-off-by: Li Yang

ptp_qoriq: fix latency in ptp_qoriq_adjtime() operation

2023-01-21T02:20:38+00:00

1588 driver loses about 1us in adjtime operation at PTP slave This is because adjtime operation uses a slow non-atomic tmr_cnt_read() followed by tmr_cnt_write() operation. In the above sequence, since the timer counter operation keeps incrementing, it leads to latency. The tmr_offset register (which is added to TMR_CNT_H/L register giving the current time) must be programmed with the delta nanoseconds. Signed-off-by: Nikhil Gupta Reviewed-by: Vladimir Oltean Tested-by: Vladimir Oltean Link: https://lore.kernel.org/r/20230119204034.7969-1-nikhil.gupta@nxp.com Signed-off-by: Jakub Kicinski

enetc: Separate C22 and C45 transactions

2023-01-14T05:40:54+00:00

The enetc MDIO bus driver can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new API calls where appropriate. This driver is shared with the Felix DSA switch, so update that at the same time. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Signed-off-by: Jakub Kicinski

Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2022-06-03T18:48:47+00:00

Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.19-rc1. Lots of tiny driver core changes and cleanups happened this cycle, but the two major things are: - firmware_loader reorganization and additions including the ability to have XZ compressed firmware images and the ability for userspace to initiate the firmware load when it needs to, instead of being always initiated by the kernel. FPGA devices specifically want this ability to have their firmware changed over the lifetime of the system boot, and this allows them to work without having to come up with yet-another-custom-uapi interface for loading firmware for them. - physical location support added to sysfs so that devices that know this information, can tell userspace where they are located in a common way. Some ACPI devices already support this today, and more bus types should support this in the future. Smaller changes include: - driver_override api cleanups and fixes - error path cleanups and fixes - get_abi script fixes - deferred probe timeout changes. It's that last change that I'm the most worried about. It has been reported to cause boot problems for a number of systems, and I have a tested patch series that resolves this issue. But I didn't get it merged into my tree before 5.18-final came out, so it has not gotten any linux-next testing. I'll send the fixup patches (there are 2) as a follow-on series to this pull request. All have been tested in linux-next for weeks, with no reported issues other than the above-mentioned boot time-outs" * tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) driver core: fix deadlock in __device_attach kernfs: Separate kernfs_pr_cont_buf and rename_lock. topology: Remove unused cpu_cluster_mask() driver core: Extend deferred probe timeout on driver registration MAINTAINERS: add Russ Weight as a firmware loader maintainer driver: base: fix UAF when driver_attach failed test_firmware: fix end of loop test in upload_read_show() driver core: location: Add "back" as a possible output for panel driver core: location: Free struct acpi_pld_info *pld driver core: Add "*" wildcard support to driver_async_probe cmdline param driver core: location: Check for allocations failure arch_topology: Trace the update thermal pressure kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file. export: fix string handling of namespace in EXPORT_SYMBOL_NS rpmsg: use local 'dev' variable rpmsg: Fix calling device_lock() on non-initialized device firmware_loader: describe 'module' parameter of firmware_upload_register() firmware_loader: Move definitions from sysfs_upload.h to sysfs.h firmware_loader: Fix configs for sysfs split selftests: firmware: Add firmware upload selftests ...

bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management

2022-04-28T13:32:20+00:00

The devices on platform/amba/fsl-mc/PCI buses could be bound to drivers with the device DMA managed by kernel drivers or user-space applications. Unfortunately, multiple devices may be placed in the same IOMMU group because they cannot be isolated from each other. The DMA on these devices must either be entirely under kernel control or userspace control, never a mixture. Otherwise the driver integrity is not guaranteed because they could access each other through the peer-to-peer accesses which by-pass the IOMMU protection. This checks and sets the default DMA mode during driver binding, and cleanups during driver unbinding. In the default mode, the device DMA is managed by the device driver which handles DMA operations through the kernel DMA APIs (see Documentation/core-api/dma-api.rst). For cases where the devices are assigned for userspace control through the userspace driver framework(i.e. VFIO), the drivers(for example, vfio_pci/ vfio_platfrom etc.) may set a new flag (driver_managed_dma) to skip this default setting in the assumption that the drivers know what they are doing with the device DMA. Calling iommu_device_use_default_domain() before {of,acpi}_dma_configure is currently a problem. As things stand, the IOMMU driver ignored the initial iommu_probe_device() call when the device was added, since at that point it had no fwspec yet. In this situation, {of,acpi}_iommu_configure() are retriggering iommu_probe_device() after the IOMMU driver has seen the firmware data via .of_xlate to learn that it actually responsible for the given device. As the result, before that gets fixed, iommu_use_default_domain() goes at the end, and calls arch_teardown_dma_ops() if it fails. Cc: Greg Kroah-Hartman Cc: Bjorn Helgaas Cc: Stuart Yoder Cc: Laurentiu Tudor Signed-off-by: Lu Baolu Reviewed-by: Greg Kroah-Hartman Reviewed-by: Jason Gunthorpe Reviewed-by: Robin Murphy Tested-by: Eric Auger Link: https://lore.kernel.org/r/20220418005000.897664-5-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel

fsl-mc: Use driver_set_override() instead of open-coding

2022-04-22T15:13:53+00:00

Use a helper to set driver_override to reduce the amount of duplicated code. Make the driver_override field const char, because it is not modified by the core and it matches other subsystems. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220419113435.246203-4-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman

bus: fsl-mc: fsl-mc-allocator: Rework MSI handling

2021-12-16T21:16:41+00:00

Storing a pointer to the MSI descriptor just to track the Linux interrupt number is daft. Just store the interrupt number and be done with it. Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/20211210221815.207838579@linutronix.de

bus/fsl-mc: Add generic implementation for open/reset/close commands

2021-09-28T22:56:05+00:00

The open/reset/close commands format is similar for all objects. Currently there are multiple implementations for these commands scattered through various drivers. The code is cavsi-identical. Create a generic implementation for the open/reset/close commands. One of the consumer will be the VFIO driver which needs to be able to reset a device. Signed-off-by: Diana Craciun Reviewed-by: Laurentiu Tudor Link: https://lore.kernel.org/r/20210922110530.24736-1-diana.craciun@oss.nxp.com Signed-off-by: Alex Williamson

bus: fsl-mc: extend fsl_mc_get_endpoint() to pass interface ID

2021-08-04T08:53:34+00:00

In case of a switch DPAA2 object, the interface ID is also needed when querying for the object endpoint. Extend fsl_mc_get_endpoint() so that users can also pass the interface ID that are interested in. Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller