kernel/linux.git/include/linux/firmware/imx, branch v6.6.132

Merge tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-08-30T23:42:21+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "The main change this time was the introduction of the drivers/genpd subsystem that gets split out from drivers/soc to keep common functionality together. The SCMI driver subsystem gets an update to version 3.2 of the specification. There are also updates to memory, reset and other firmware drivers. On the soc driver side, the updates are mostly cleanups across a number of Arm platforms. On driver for loongarch adds power management for DT based systems, another driver is for HiSilicon's Arm server chips with their HCCS system health interface. The remaining updates for the most part add support for additional hardware in existing drivers or contain minor cleanups. Most of these are for the Qualcomm Snapdragon platform" * tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits) bus: fsl-mc: Use common ranges functions soc: kunpeng_hccs: fix some sparse warnings about incorrect type soc: loongson2_pm: add power management support soc: dt-bindings: add loongson-2 pm soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1 genpd: rockchip: Add PD_VO entry for rv1126 bus: ti-sysc: Fix cast to enum warning soc: kunpeng_hccs: add MAILBOX dependency MAINTAINERS: remove OXNAS entry dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated irqchip: irq-versatile-fpga: remove obsolete oxnas compatible soc: qcom: aoss: Tidy up qmp_send() callers soc: qcom: aoss: Format string in qmp_send() soc: qcom: aoss: Move length requirements from caller soc: kunpeng_hccs: fix size_t format string soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX dt-bindings: firmware: qcom: scm: Updating VMID list firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP firmware: imx: scu-irq: add imx_scu_irq_get_status ...

firmware: imx: scu-irq: add imx_scu_irq_get_status

2023-08-11T14:14:05+00:00

Extract the scu irq get status code from imx_scu_irq_work_handler and make into a new function imx_scu_irq_get_status which could be used by others, such as SECO. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo

firmware: imx: scu: use EOPNOTSUPP

2023-08-11T14:14:00+00:00

Per checkpatch.pl, "ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP" So use EOPNOTSUPP to replace ENOTSUPP. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo

ASoC: SOF: imx: remove error checks on NULL ipc

2023-07-31T22:22:15+00:00

imx_dsp_get_data() can return NULL, but the value is not checked before being usd, leading to static analysis warnings. sound/soc/sof/imx/imx8.c:85:32: error: dereference of NULL ‘0’ [CWE-476] [-Werror=analyzer-null-dereference] 85 | spin_lock_irqsave(&priv->sdev->ipc_lock, flags); | ~~~~^~~~~~ It appears this is not really a possible problem, so remove those checks. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Daniel Baluta Reviewed-by: Yaochun Hung Link: https://lore.kernel.org/r/20230731213748.440285-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown

firmware: imx: add get resource owner api

2022-02-12T06:07:36+00:00

Add resource owner management API, this API could be used to check whether M4 is under control of Linux. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo

mailbox: imx: support i.MX8ULP S4 MU

2021-10-30T04:03:09+00:00

Like i.MX8 SCU, i.MX8ULP S4 also has vendor specific protocol. - bind SCU/S4 MU part to share one tx/rx/init API to make code simple. - S4 msg max size is very large, so alloc the space at driver probe, not use local on stack variable. - S4 MU has 8 TR and 4 RR which is different with i.MX8 MU, so adapt code to reflect this. Tested on i.MX8MP, i.MX8ULP Signed-off-by: Peng Fan Signed-off-by: Jassi Brar

firmware: imx-dsp: Export functions to request/free channels

2020-11-16T08:33:48+00:00

In order to save power, we only need to request a channel when the communication with the DSP active. For this we export the following functions: - imx_dsp_request_channel, gets a channel with a given index - imx_dsp_free_channel, frees a channel with a given index Notice that we still request channels at probe to support devices that do not have PM callbacks implemented. More explanations about why requesting a channel has an effect on power savings: - requesting an mailbox channel will call mailbox's startup function. - startup function calls pm_runtime_get_sync which increments device usage count and will keep the device active. Specifically, mailbox clock will be always ON when a mailbox channel is requested. Signed-off-by: Daniel Baluta Reviewed-by: Paul Olaru Signed-off-by: Shawn Guo

firmware: imx: add dummy functions

2020-10-28T08:59:40+00:00

add dummy functions to avoid build failure when header files are included, but drivers are not built. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo

firmware: imx: Move i.MX SCU soc driver into imx firmware folder

2020-07-13T02:02:00+00:00

The i.MX SCU soc driver depends on SCU firmware driver, so it has to use platform driver model for proper defer probe operation, since it has no device binding in DT file, a simple platform device is created together inside the platform driver. To make it more clean, we can just move the entire SCU soc driver into imx firmware folder and initialized by i.MX SCU firmware driver. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo

firmware: imx: add resource management api

2020-06-23T07:37:56+00:00

Add resource management API, when we have multiple partition running together, resources not owned to current partition should not be used. Reviewed-by: Leonard Crestez Reviewed-by: Dong Aisheng Signed-off-by: Peng Fan Signed-off-by: Shawn Guo