kernel/linux.git/include/linux/filter.h, branch v5.2.13

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2019-05-08T05:03:58+00:00

Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...

bpf: Use vmalloc special flag

2019-04-30T10:37:59+00:00

Use new flag VM_FLUSH_RESET_PERMS for handling freeing of special permissioned memory in vmalloc and remove places where memory was set RW before freeing which is no longer needed. Don't track if the memory is RO anymore because it is now tracked in vmalloc. Signed-off-by: Rick Edgecombe Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Alexei Starovoitov Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Daniel Borkmann Cc: Dave Hansen Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Nadav Amit Cc: Rik van Riel Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190426001143.4983-19-namit@vmware.com Signed-off-by: Ingo Molnar

x86/modules: Avoid breaking W^X while loading modules

2019-04-30T10:37:55+00:00

When modules and BPF filters are loaded, there is a time window in which some memory is both writable and executable. An attacker that has already found another vulnerability (e.g., a dangling pointer) might be able to exploit this behavior to overwrite kernel code. Prevent having writable executable PTEs in this stage. In addition, avoiding having W+X mappings can also slightly simplify the patching of modules code on initialization (e.g., by alternatives and static-key), as would be done in the next patch. This was actually the main motivation for this patch. To avoid having W+X mappings, set them initially as RW (NX) and after they are set as RO set them as X as well. Setting them as executable is done as a separate step to avoid one core in which the old PTE is cached (hence writable), and another which sees the updated PTE (executable), which would break the W^X protection. Suggested-by: Thomas Gleixner Suggested-by: Andy Lutomirski Signed-off-by: Nadav Amit Signed-off-by: Rick Edgecombe Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: H. Peter Anvin Cc: Jessica Yu Cc: Kees Cook Cc: Linus Torvalds Cc: Masami Hiramatsu Cc: Rik van Riel Link: https://lkml.kernel.org/r/20190426001143.4983-12-namit@vmware.com Signed-off-by: Ingo Molnar

bpf: Add file_pos field to bpf_sysctl ctx

2019-04-12T20:54:58+00:00

Add file_pos field to bpf_sysctl context to read and write sysctl file position at which sysctl is being accessed (read or written). The field can be used to e.g. override whole sysctl value on write to sysctl even when sys_write is called by user space with file_pos > 0. Or BPF program may reject such accesses. Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov

bpf: Introduce bpf_sysctl_{get,set}_new_value helpers

2019-04-12T20:54:58+00:00

Add helpers to work with new value being written to sysctl by user space. bpf_sysctl_get_new_value() copies value being written to sysctl into provided buffer. bpf_sysctl_set_new_value() overrides new value being written by user space with a one from provided buffer. Buffer should contain string representation of the value, similar to what can be seen in /proc/sys/. Both helpers can be used only on sysctl write. File position matters and can be managed by an interface that will be introduced separately. E.g. if user space calls sys_write to a file in /proc/sys/ at file position = X, where X > 0, then the value set by bpf_sysctl_set_new_value() will be written starting from X. If program wants to override whole value with specified buffer, file position has to be set to zero. Documentation for the new helpers is provided in bpf.h UAPI. Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov

bpf: Introduce bpf_sysctl_get_current_value helper

2019-04-12T20:54:58+00:00

Add bpf_sysctl_get_current_value() helper to copy current sysctl value into provided by BPF_PROG_TYPE_CGROUP_SYSCTL program buffer. It provides same string as user space can see by reading corresponding file in /proc/sys/, including new line, etc. Documentation for the new helper is provided in bpf.h UAPI. Since current value is kept in ctl_table->data in a parsed form, ctl_table->proc_handler() with write=0 is called to read that data and convert it to a string. Such a string can later be parsed by a program using helpers that will be introduced separately. Unfortunately it's not trivial to provide API to access parsed data due to variety of data representations (string, intvec, uintvec, ulongvec, custom structures, even NULL, etc). Instead it's assumed that user know how to handle specific sysctl they're interested in and appropriate helpers can be used. Since ctl_table->proc_handler() expects __user buffer, conversion to __user happens for kernel allocated one where the value is stored. Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov

bpf: Sysctl hook

2019-04-12T20:54:58+00:00

Containerized applications may run as root and it may create problems for whole host. Specifically such applications may change a sysctl and affect applications in other containers. Furthermore in existing infrastructure it may not be possible to just completely disable writing to sysctl, instead such a process should be gradual with ability to log what sysctl are being changed by a container, investigate, limit the set of writable sysctl to currently used ones (so that new ones can not be changed) and eventually reduce this set to zero. The patch introduces new program type BPF_PROG_TYPE_CGROUP_SYSCTL and attach type BPF_CGROUP_SYSCTL to solve these problems on cgroup basis. New program type has access to following minimal context: struct bpf_sysctl { __u32 write; }; Where @write indicates whether sysctl is being read (= 0) or written (= 1). Helpers to access sysctl name and value will be introduced separately. BPF_CGROUP_SYSCTL attach point is added to sysctl code right before passing control to ctl_table->proc_handler so that BPF program can either allow or deny access to sysctl. Suggested-by: Roman Gushchin Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-03-06T15:59:36+00:00

Pull perf updates from Ingo Molnar: "Lots of tooling updates - too many to list, here's a few highlights: - Various subcommand updates to 'perf trace', 'perf report', 'perf record', 'perf annotate', 'perf script', 'perf test', etc. - CPU and NUMA topology and affinity handling improvements, - HW tracing and HW support updates: - Intel PT updates - ARM CoreSight updates - vendor HW event updates - BPF updates - Tons of infrastructure updates, both on the build system and the library support side - Documentation updates. - ... and lots of other changes, see the changelog for details. Kernel side updates: - Tighten up kprobes blacklist handling, reduce the number of places where developers can install a kprobe and hang/crash the system. - Fix/enhance vma address filter handling. - Various PMU driver updates, small fixes and additions. - refcount_t conversions - BPF updates - error code propagation enhancements - misc other changes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (238 commits) perf script python: Add Python3 support to syscall-counts-by-pid.py perf script python: Add Python3 support to syscall-counts.py perf script python: Add Python3 support to stat-cpi.py perf script python: Add Python3 support to stackcollapse.py perf script python: Add Python3 support to sctop.py perf script python: Add Python3 support to powerpc-hcalls.py perf script python: Add Python3 support to net_dropmonitor.py perf script python: Add Python3 support to mem-phys-addr.py perf script python: Add Python3 support to failed-syscalls-by-pid.py perf script python: Add Python3 support to netdev-times.py perf tools: Add perf_exe() helper to find perf binary perf script: Handle missing fields with -F +.. perf data: Add perf_data__open_dir_data function perf data: Add perf_data__(create_dir|close_dir) functions perf data: Fail check_backup in case of error perf data: Make check_backup work over directories perf tools: Add rm_rf_perf_data function perf tools: Add pattern name checking to rm_rf perf tools: Add depth checking to rm_rf perf data: Add global path holder ...

Merge branch 'linus' into perf/core, to pick up fixes

2019-02-28T07:27:17+00:00

Signed-off-by: Ingo Molnar

bpf: enable program stats

2019-02-27T16:22:50+00:00

JITed BPF programs are indistinguishable from kernel functions, but unlike kernel code BPF code can be changed often. Typical approach of "perf record" + "perf report" profiling and tuning of kernel code works just as well for BPF programs, but kernel code doesn't need to be monitored whereas BPF programs do. Users load and run large amount of BPF programs. These BPF stats allow tools monitor the usage of BPF on the server. The monitoring tools will turn sysctl kernel.bpf_stats_enabled on and off for few seconds to sample average cost of the programs. Aggregated data over hours and days will provide an insight into cost of BPF and alarms can trigger in case given program suddenly gets more expensive. The cost of two sched_clock() per program invocation adds ~20 nsec. Fast BPF progs (like selftests/bpf/progs/test_pkt_access.c) will slow down from ~10 nsec to ~30 nsec. static_key minimizes the cost of the stats collection. There is no measurable difference before/after this patch with kernel.bpf_stats_enabled=0 Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann