kernel/linux.git/include/linux/filter.h, branch v5.19

bpf: Fix net.core.bpf_jit_harden race

2022-03-16T22:13:36+00:00

It is the bpf_jit_harden counterpart to commit 60b58afc96c9 ("bpf: fix net.core.bpf_jit_enable race"). bpf_jit_harden will be tested twice for each subprog if there are subprogs in bpf program and constant blinding may increase the length of program, so when running "./test_progs -t subprogs" and toggling bpf_jit_harden between 0 and 2, jit_subprogs may fail because constant blinding increases the length of subprog instructions during extra passs. So cache the value of bpf_jit_blinding_enabled() during program allocation, and use the cached value during constant blinding, subprog JITing and args tracking of tail call. Signed-off-by: Hou Tao Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220309123321.2400262-4-houtao1@huawei.com

bpf: Remove BPF_SKB_DELIVERY_TIME_NONE and rename s/delivery_time_/tstamp_/

2022-03-10T21:57:05+00:00

This patch is to simplify the uapi bpf.h regarding to the tstamp type and use a similar way as the kernel to describe the value stored in __sk_buff->tstamp. My earlier thought was to avoid describing the semantic and clock base for the rcv timestamp until there is more clarity on the use case, so the __sk_buff->delivery_time_type naming instead of __sk_buff->tstamp_type. With some thoughts, it can reuse the UNSPEC naming. This patch first removes BPF_SKB_DELIVERY_TIME_NONE and also rename BPF_SKB_DELIVERY_TIME_UNSPEC to BPF_SKB_TSTAMP_UNSPEC and BPF_SKB_DELIVERY_TIME_MONO to BPF_SKB_TSTAMP_DELIVERY_MONO. The semantic of BPF_SKB_TSTAMP_DELIVERY_MONO is the same: __sk_buff->tstamp has delivery time in mono clock base. BPF_SKB_TSTAMP_UNSPEC means __sk_buff->tstamp has the (rcv) tstamp at ingress and the delivery time at egress. At egress, the clock base could be found from skb->sk->sk_clockid. __sk_buff->tstamp == 0 naturally means NONE, so NONE is not needed. With BPF_SKB_TSTAMP_UNSPEC for the rcv tstamp at ingress, the __sk_buff->delivery_time_type is also renamed to __sk_buff->tstamp_type which was also suggested in the earlier discussion: https://lore.kernel.org/bpf/b181acbe-caf8-502d-4b7b-7d96b9fc5d55@iogearbox.net/ The above will then make __sk_buff->tstamp and __sk_buff->tstamp_type the same as its kernel skb->tstamp and skb->mono_delivery_time counter part. The internal kernel function bpf_skb_convert_dtime_type_read() is then renamed to bpf_skb_convert_tstamp_type_read() and it can be simplified with the BPF_SKB_DELIVERY_TIME_NONE gone. A BPF_ALU32_IMM(BPF_AND) insn is also saved by using BPF_JMP32_IMM(BPF_JSET). The bpf helper bpf_skb_set_delivery_time() is also renamed to bpf_skb_set_tstamp(). The arg name is changed from dtime to tstamp also. It only allows setting tstamp 0 for BPF_SKB_TSTAMP_UNSPEC and it could be relaxed later if there is use case to change mono delivery time to non mono. prog->delivery_time_access is also renamed to prog->tstamp_type_access. Signed-off-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20220309090509.3712315-1-kafai@fb.com

bpf: Add __sk_buff->delivery_time_type and bpf_skb_set_skb_delivery_time()

2022-03-03T14:38:49+00:00

* __sk_buff->delivery_time_type: This patch adds __sk_buff->delivery_time_type. It tells if the delivery_time is stored in __sk_buff->tstamp or not. It will be most useful for ingress to tell if the __sk_buff->tstamp has the (rcv) timestamp or delivery_time. If delivery_time_type is 0 (BPF_SKB_DELIVERY_TIME_NONE), it has the (rcv) timestamp. Two non-zero types are defined for the delivery_time_type, BPF_SKB_DELIVERY_TIME_MONO and BPF_SKB_DELIVERY_TIME_UNSPEC. For UNSPEC, it can only happen in egress because only mono delivery_time can be forwarded to ingress now. The clock of UNSPEC delivery_time can be deduced from the skb->sk->sk_clockid which is how the sch_etf doing it also. * Provide forwarded delivery_time to tc-bpf@ingress: With the help of the new delivery_time_type, the tc-bpf has a way to tell if the __sk_buff->tstamp has the (rcv) timestamp or the delivery_time. During bpf load time, the verifier will learn if the bpf prog has accessed the new __sk_buff->delivery_time_type. If it does, it means the tc-bpf@ingress is expecting the skb->tstamp could have the delivery_time. The kernel will then read the skb->tstamp as-is during bpf insn rewrite without checking the skb->mono_delivery_time. This is done by adding a new prog->delivery_time_access bit. The same goes for writing skb->tstamp. * bpf_skb_set_delivery_time(): The bpf_skb_set_delivery_time() helper is added to allow setting both delivery_time and the delivery_time_type at the same time. If the tc-bpf does not need to change the delivery_time_type, it can directly write to the __sk_buff->tstamp as the existing tc-bpf has already been doing. It will be most useful at ingress to change the __sk_buff->tstamp from the (rcv) timestamp to a mono delivery_time and then bpf_redirect_*(). bpf only has mono clock helper (bpf_ktime_get_ns), and the current known use case is the mono EDT for fq, and only mono delivery time can be kept during forward now, so bpf_skb_set_delivery_time() only supports setting BPF_SKB_DELIVERY_TIME_MONO. It can be extended later when use cases come up and the forwarding path also supports other clock bases. Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller

bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]

2022-02-08T02:13:01+00:00

This is the jit binary allocator built on top of bpf_prog_pack. bpf_prog_pack allocates RO memory, which cannot be used directly by the JIT engine. Therefore, a temporary rw buffer is allocated for the JIT engine. Once JIT is done, bpf_jit_binary_pack_finalize is used to copy the program to the RO memory. bpf_jit_binary_pack_alloc reserves 16 bytes of extra space for illegal instructions, which is small than the 128 bytes space reserved by bpf_jit_binary_alloc. This change is necessary for bpf_jit_binary_hdr to find the correct header. Also, flag use_bpf_prog_pack is added to differentiate a program allocated by bpf_jit_binary_pack_alloc. Signed-off-by: Song Liu Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220204185742.271030-9-song@kernel.org

bpf: Use size instead of pages in bpf_binary_header

2022-02-08T02:13:01+00:00

This is necessary to charge sub page memory for the BPF program. Signed-off-by: Song Liu Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220204185742.271030-4-song@kernel.org

bpf: Move getsockopt retval to struct bpf_cg_run_ctx

2022-01-19T20:51:30+00:00

The retval value is moved to struct bpf_cg_run_ctx for ease of access in different prog types with different context structs layouts. The helper implementation (to be added in a later patch in the series) can simply perform a container_of from current->bpf_ctx to retrieve bpf_cg_run_ctx. Unfortunately, there is no easy way to access the current task_struct via the verifier BPF bytecode rewrite, aside from possibly calling a helper, so a pointer to current task is added to struct bpf_sockopt_kern so that the rewritten BPF bytecode can access struct bpf_cg_run_ctx with an indirection. For backward compatibility, if a getsockopt program rejects a syscall by returning 0, an -EPERM will be generated, by having the BPF_PROG_RUN_ARRAY_CG family macros automatically set the retval to -EPERM. Unlike prior to this patch, this -EPERM will be visible to ctx->retval for any other hooks down the line in the prog array. Additionally, the restriction that getsockopt filters can only set the retval to 0 is removed, considering that certain getsockopt implementations may return optlen. Filters are now able to set the value arbitrarily. Signed-off-by: YiFei Zhu Reviewed-by: Stanislav Fomichev Link: https://lore.kernel.org/r/73b0325f5c29912ccea7ea57ec1ed4d388fc1d37.1639619851.git.zhuyifei@google.com Signed-off-by: Alexei Starovoitov

xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames

2022-01-06T03:46:32+00:00

Add an xdp_do_redirect_frame() variant which supports pre-computed xdp_frame structures. This will be used in bpf_prog_run() to avoid having to write to the xdp_frame structure when the XDP program doesn't modify the frame boundaries. Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220103150812.87914-6-toke@redhat.com

bpf: Let bpf_warn_invalid_xdp_action() report more info

2021-12-13T21:28:27+00:00

In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni Signed-off-by: Daniel Borkmann Acked-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-12-09T21:23:02+00:00

No conflicts. Signed-off-by: Jakub Kicinski

treewide: Add missing includes masked by cgroup -> bpf dependency

2021-12-03T18:58:13+00:00

cgroup.h (therefore swap.h, therefore half of the universe) includes bpf.h which in turn includes module.h and slab.h. Since we're about to get rid of that dependency we need to clean things up. v2: drop the cpu.h include from cacheinfo.h, it's not necessary and it makes riscv sensitive to ordering of include files. Signed-off-by: Jakub Kicinski Signed-off-by: Alexei Starovoitov Reviewed-by: Christoph Hellwig Acked-by: Krzysztof Wilczyński Acked-by: Peter Chen Acked-by: SeongJae Park Acked-by: Jani Nikula Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/ # v1 Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org