kernel/linux.git/include/linux/cpufreq.h, branch linux-6.9.y

Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2024-03-19T18:57:26+00:00

Pull more ARM SoC updates from Arnd Bergmann: "These are changes that for some reason ended up not making it into the first four branches but that should still make it into 6.9: - A rework of the omap clock support that touches both drivers and device tree files - The reset controller branch changes that had a dependency on late bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the drivers branch - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree changes that got delayed and needed some extra time in linux-next for wider testing" * tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: fsl: dpio: fix kcalloc() argument order bus: ts-nbus: Improve error reporting bus: ts-nbus: Convert to atomic pwm API riscv: dts: starfive: jh7110: Add camera subsystem nodes ARM: bcm: stop selecing CONFIG_TICK_ONESHOT ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift clk: ti: Improve clksel clock bit parsing for reg property clk: ti: Handle possible address in the node name dt-bindings: pwm: opencores: Add compatible for StarFive JH8100 dt-bindings: riscv: cpus: reg matches hart ID reset: Instantiate reset GPIO controller for shared reset-gpios reset: gpio: Add GPIO-based reset controller cpufreq: do not open-code of_phandle_args_equal() of: Add of_phandle_args_equal() helper reset: simple: add support for Sophgo SG2042 dt-bindings: reset: sophgo: support SG2042 riscv: dts: microchip: add specific compatible for mpfs pdma riscv: dts: microchip: add missing CAN bus clocks ARM: brcmstb: Add debug UART entry for 74165 ...

Merge tag 'opp-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm

2024-03-11T15:22:36+00:00

Merge OPP (operating performance points) updates for 6.9 from Viresh Kumar: "- Fix couple of warnings related to W=1 builds. (Viresh Kumar). - Move Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar). - Extend dev_pm_opp_data with turbo support (Sibi Sankar). - dt-bindings: drop maxItems from inner items (David Heidelberg)." * tag 'opp-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: drop maxItems from inner items OPP: debugfs: Fix warning around icc_get_name() OPP: debugfs: Fix warning with W=1 builds cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h OPP: Extend dev_pm_opp_data with turbo support

cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h

2024-03-11T05:09:24+00:00

Move the declaration of functions defined in the OPP core to pm_opp.h. These were added to cpufreq.h as it was the only user of the APIs, but that was a mistake perhaps. Fix it. Signed-off-by: Viresh Kumar

cpufreq: Limit resolving a frequency to policy min/max

2024-02-29T19:21:44+00:00

Resolving a frequency to an efficient one should not transgress policy->max (which can be set for thermal reason) and policy->min. Currently, there is possibility where scaling_cur_freq can exceed scaling_max_freq when scaling_max_freq is an inefficient frequency. Add a check to ensure that resolving a frequency will respect policy->min/max. Cc: All applicable Fixes: 1f39fa0dccff ("cpufreq: Introducing CPUFREQ_RELATION_E") Signed-off-by: Shivnandan Kumar [ rjw: Whitespace adjustment, changelog edits ] Signed-off-by: Rafael J. Wysocki

cpufreq: Remove references to 10ms min sampling rate

2024-02-24T14:02:33+00:00

A minimum sampling rate value of 10ms was introduced in: commit cef9615a853e ("[CPUFREQ] ondemand: Uncouple minimal sampling rate from HZ in NO_HZ case") The use of this value was removed in: commit ed4676e25463 ("cpufreq: Replace "max_transition_latency" with "dynamic_switching"") Remove: - a comment referencing this value - an unused macro associated to this value Signed-off-by: Pierre Gondois Signed-off-by: Rafael J. Wysocki

cpufreq: do not open-code of_phandle_args_equal()

2024-02-21T10:53:24+00:00

Use newly added of_phandle_args_equal() helper to compare two of_phandle_args. Acked-by: Viresh Kumar Reviewed-by: Philipp Zabel Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240129115216.96479-3-krzysztof.kozlowski@linaro.org Signed-off-by: Philipp Zabel

ACPI: cpufreq: Add highest perf change notification

2024-01-31T13:54:50+00:00

Platform firmware sends notify 0x85 to inform the OS that the highest performance of a CPU has changed. This will be used by the AMD P-state driver to update the ranking of preferred cores and set the priority of cores accordingly. Tested-by: Oleksandr Natalenko Reviewed-by: Mario Limonciello Reviewed-by: Huang Rui Reviewed-by: Perry Yuan Signed-off-by: Meng Li Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-device-notification-values [ rjw: New subject, changelog edits ] Signed-off-by: Rafael J. Wysocki

cpufreq: Use the fixed and coherent frequency for scaling capacity

2023-12-23T14:52:34+00:00

cpuinfo.max_freq can change at runtime because of boost as an example. This implies that the value could be different from the frequency that has been used to compute the capacity of a CPU. The new arch_scale_freq_ref() returns a fixed and coherent frequency that can be used to compute the capacity for a given frequency. [ Also fix a arch_set_freq_scale() newline style wart in . ] Signed-off-by: Vincent Guittot Signed-off-by: Ingo Molnar Tested-by: Lukasz Luba Reviewed-by: Lukasz Luba Acked-by: Viresh Kumar Acked-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/20231211104855.558096-3-vincent.guittot@linaro.org

cpufreq: Rebuild sched-domains when removing cpufreq driver

2023-10-06T20:05:56+00:00

The Energy Aware Scheduler (EAS) relies on the schedutil governor. When moving to/from the schedutil governor, sched domains must be rebuilt to allow re-evaluating the enablement conditions of EAS. This is done through sched_cpufreq_governor_change(). Having a cpufreq governor assumes a cpufreq driver is running. Inserting/removing a cpufreq driver should trigger a re-evaluation of EAS enablement conditions, avoiding to see EAS enabled when removing a running cpufreq driver. Rebuild the sched domains in schedutil's sugov_init()/sugov_exit(), allowing to check EAS's enablement condition whenever schedutil governor is initialized/exited from. Move relevant code up in schedutil.c to avoid a split and conditional function declaration. Rename sched_cpufreq_governor_change() to sugov_eas_rebuild_sd(). Signed-off-by: Pierre Gondois Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

cpufreq: Support per-policy performance boost

2023-08-29T18:51:40+00:00

The boost control currently applies to the whole system. However, users may prefer to boost a subset of cores in order to provide prioritized performance to workloads running on the boosted cores. Enable per-policy boost by adding a 'boost' sysfs interface under each policy path. This can be found at: /sys/devices/system/cpu/cpufreq/policy<*>/boost Same to the global boost switch, writing 1/0 to the per-policy 'boost' enables/disables boost on a cpufreq policy respectively. The user view of global and per-policy boost controls should be: 1. Enabling global boost initially enables boost on all policies, and per-policy boost can then be enabled or disabled individually, given that the platform does support so. 2. Disabling global boost makes the per-policy boost interface illegal. Signed-off-by: Jie Zhan Reviewed-by: Wei Xu Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki