kernel/linux.git/include/linux/clk/tegra.h, branch v6.6.132

clk: tegra: Add stubs needed for compile testing

2021-10-05T17:08:11+00:00

These stubs are needed to allow the tegra-cpuidle driver to be compile-tested. Signed-off-by: Thierry Reding

clk: tegra: Add stubs needed for compile-testing

2021-06-01T11:37:40+00:00

Add stubs needed for compile-testing of Tegra memory drivers. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: Add PLLE HW power sequencer control

2021-03-24T13:01:58+00:00

PLLE has a hardware power sequencer logic which is a state machine that can power on/off PLLE without any software intervention. The sequencer has two inputs, one from XUSB UPHY PLL and the other from SATA UPHY PLL. PLLE provides reference clock to XUSB and SATA UPHY PLLs. When both of the downstream PLLs are powered-off, PLLE hardware power sequencer will automatically power off PLLE for power saving. XUSB and SATA UPHY PLLs also have their own hardware power sequencer logic. XUSB UPHY PLL is shared between XUSB SuperSpeed ports and PCIE controllers. The XUSB UPHY PLL hardware power sequencer has inputs from XUSB and PCIE. When all of the XUSB SuperSpeed ports and PCIE controllers are in low power state, XUSB UPHY PLL hardware power sequencer automatically power off PLL and flags idle to PLLE hardware power sequencer. Similar applies to SATA UPHY PLL. PLLE hardware power sequencer has to be enabled after both downstream sequencers are enabled. This commit adds two helper functions: 1. tegra210_plle_hw_sequence_start() for XUSB PADCTL driver to enable PLLE hardware sequencer at proper time. 2. tegra210_plle_hw_sequence_is_enabled() for XUSB PADCTL driver to check whether PLLE hardware sequencer has been enabled or not. Signed-off-by: JC Kuo Acked-by: Thierry Reding Acked-by: Stephen Boyd Signed-off-by: Thierry Reding

memory: tegra124-emc: Make driver modular

2021-01-05T17:00:09+00:00

Add modularization support to the Tegra124 EMC driver, which now can be compiled as a loadable kernel module. Note that EMC clock must be registered at clk-init time, otherwise PLLM will be disabled as unused clock at boot time if EMC driver is compiled as a module. Hence add a prepare/complete callbacks. similarly to what is done for the Tegra20/30 EMC drivers. Tested-by: Nicolas Chauvet Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski

clk: tegra: Implement Tegra210 EMC clock

2020-05-12T20:48:42+00:00

The EMC clock needs to carefully coordinate with the EMC controller programming to make sure external memory can be properly clocked. Do so by hooking up the EMC clock with an EMC provider that will specify which rates are supported by the EMC and provide a callback to use for setting the clock rate at the EMC. Based on work by Peter De Schrijver . Signed-off-by: Joseph Lo Signed-off-by: Thierry Reding

clk: tegra: Export functions for EMC clock scaling

2020-05-12T20:48:41+00:00

Export functions to allow accessing the CAR register required by EMC clock scaling. These functions will be used to access the CAR register as part of the scaling sequence. Signed-off-by: Joseph Lo Signed-off-by: Thierry Reding

clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP

2019-11-11T13:53:05+00:00

The new CPUIDLE driver uses the Tegra's CLK API and that driver won't strictly depend on CONFIG_PM_SLEEP, hence add the required stubs in order to allow compiling of the new driver with the CONFIG_PM_SLEEP=n. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: Add Tegra20/30 EMC clock implementation

2019-11-11T13:01:22+00:00

A proper External Memory Controller clock rounding and parent selection functionality is required by the EMC drivers, it is not available using the generic clock implementation because only the Memory Controller driver is aware of what clock rates are actually available for a particular device. EMC drivers will have to register a Tegra-specific CLK-API callback which will perform rounding of a requested rate. EMC clock users won't be able to request EMC clock by getting -EPROBE_DEFER until EMC driver is probed and the callback is set up. The functionality is somewhat similar to the clk-emc.c which serves Tegra124+ SoCs. The later HW generations support more parent clock sources and the HW configuration / integration with the EMC drivers differs a tad from the older gens, hence it's not really worth to try to squash everything into a single source file. Acked-by: Peter De Schrijver Signed-off-by: Dmitry Osipenko Acked-by: Stephen Boyd Signed-off-by: Thierry Reding

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

2019-05-30T18:29:52+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Steve Winslow Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman

clk: tegra: MBIST work around for Tegra210

2018-03-08T18:18:08+00:00

Tegra210 has a hw bug which can cause IP blocks to lock up when ungating a domain. The reason is that the logic responsible for resetting the memory built-in self test mode can come up in an undefined state because its clock is gated by a second level clock gate (SLCG). Work around this by making sure the logic will get some clock edges by ensuring the relevant clock is enabled and temporarily override the relevant SLCGs. Unfortunately for some IP blocks, the control bits for overriding the SLCGs are not in CAR, but in the IP block itself. This means we need to map a few extra register banks in the clock code. Signed-off-by: Peter De Schrijver Reviewed-by: Jon Hunter Tested-by: Jon Hunter Tested-by: Hector Martin Tested-by: Andre Heider Tested-by: Mikko Perttunen Signed-off-by: Thierry Reding fixup mbist