kernel/linux.git/include/linux/bpf.h, branch v6.4-rc6

bpf: add test_run support for netfilter program type

2023-04-21T18:34:50+00:00

add glue code so a bpf program can be run using userspace-provided netfilter state and packet/skb. Default is to use ipv4:output hook point, but this can be overridden by userspace. Userspace provided netfilter state is restricted, only hook and protocol families can be overridden and only to ipv4/ipv6. Signed-off-by: Florian Westphal Link: https://lore.kernel.org/r/20230421170300.24115-7-fw@strlen.de Signed-off-by: Alexei Starovoitov

bpf: Centralize btf_field-specific initialization logic

2023-04-16T00:36:50+00:00

All btf_fields in an object are 0-initialized by memset in bpf_obj_init. This might not be a valid initial state for some field types, in which case kfuncs that use the type will properly initialize their input if it's been 0-initialized. Some BPF graph collection types and kfuncs do this: bpf_list_{head,node} and bpf_rb_node. An earlier patch in this series added the bpf_refcount field, for which the 0 state indicates that the refcounted object should be free'd. bpf_obj_init treats this field specially, setting refcount to 1 instead of relying on scattered "refcount is 0? Must have just been initialized, let's set to 1" logic in kfuncs. This patch extends this treatment to list and rbtree field types, allowing most scattered initialization logic in kfuncs to be removed. Note that bpf_{list_head,rb_root} may be inside a BPF map, in which case they'll be 0-initialized without passing through the newly-added logic, so scattered initialization logic must remain for these collection root types. Signed-off-by: Dave Marchevsky Link: https://lore.kernel.org/r/20230415201811.343116-9-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov

bpf: Support refcounted local kptrs in existing semantics

2023-04-16T00:36:49+00:00

A local kptr is considered 'refcounted' when it is of a type that has a bpf_refcount field. When such a kptr is created, its refcount should be initialized to 1; when destroyed, the object should be free'd only if a refcount decr results in 0 refcount. Existing logic always frees the underlying memory when destroying a local kptr, and 0-initializes all btf_record fields. This patch adds checks for "is local kptr refcounted?" and new logic for that case in the appropriate places. This patch focuses on changing existing semantics and thus conspicuously does _not_ provide a way for BPF programs in increment refcount. That follows later in the series. __bpf_obj_drop_impl is modified to do the right thing when it sees a refcounted type. Container types for graph nodes (list, tree, stashed in map) are migrated to use __bpf_obj_drop_impl as a destructor for their nodes instead of each having custom destruction code in their _free paths. Now that "drop" isn't a synonym for "free" when the type is refcounted it makes sense to centralize this logic. Signed-off-by: Dave Marchevsky Link: https://lore.kernel.org/r/20230415201811.343116-4-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov

bpf: Introduce opaque bpf_refcount struct and add btf_record plumbing

2023-04-16T00:36:49+00:00

A 'struct bpf_refcount' is added to the set of opaque uapi/bpf.h types meant for use in BPF programs. Similarly to other opaque types like bpf_spin_lock and bpf_rbtree_node, the verifier needs to know where in user-defined struct types a bpf_refcount can be located, so necessary btf_record plumbing is added to enable this. bpf_refcount is sized to hold a refcount_t. Similarly to bpf_spin_lock, the offset of a bpf_refcount is cached in btf_record as refcount_off in addition to being in the field array. Caching refcount_off makes sense for this field because further patches in the series will modify functions that take local kptrs (e.g. bpf_obj_drop) to change their behavior if the type they're operating on is refcounted. So enabling fast "is this type refcounted?" checks is desirable. No such verifier behavior changes are introduced in this patch, just logic to recognize 'struct bpf_refcount' in btf_record. Signed-off-by: Dave Marchevsky Link: https://lore.kernel.org/r/20230415201811.343116-3-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov

bpf: Remove btf_field_offs, use btf_record's fields instead

2023-04-16T00:36:49+00:00

The btf_field_offs struct contains (offset, size) for btf_record fields, sorted by offset. btf_field_offs is always used in conjunction with btf_record, which has btf_field 'fields' array with (offset, type), the latter of which btf_field_offs' size is derived from via btf_field_type_size. This patch adds a size field to struct btf_field and sorts btf_record's fields by offset, making it possible to get rid of btf_field_offs. Less data duplication and less code complexity results. Since btf_field_offs' lifetime closely followed the btf_record used to populate it, most complexity wins are from removal of initialization code like: if (btf_record_successfully_initialized) { foffs = btf_parse_field_offs(rec); if (IS_ERR_OR_NULL(foffs)) // free the btf_record and return err } Other changes in this patch are pretty mechanical: * foffs->field_off[i] -> rec->fields[i].offset * foffs->field_sz[i] -> rec->fields[i].size * Sort rec->fields in btf_parse_fields before returning * It's possible that this is necessary independently of other changes in this patch. btf_record_find in syscall.c expects btf_record's fields to be sorted by offset, yet there's no explicit sorting of them before this patch, record's fields are populated in the order they're read from BTF struct definition. BTF docs don't say anything about the sortedness of struct fields. * All functions taking struct btf_field_offs * input now instead take struct btf_record *. All callsites of these functions already have access to the correct btf_record. Signed-off-by: Dave Marchevsky Link: https://lore.kernel.org/r/20230415201811.343116-2-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov

bpf: Support 64-bit pointers to kfuncs

2023-04-14T04:36:41+00:00

test_ksyms_module fails to emit a kfunc call targeting a module on s390x, because the verifier stores the difference between kfunc address and __bpf_call_base in bpf_insn.imm, which is s32, and modules are roughly (1 << 42) bytes away from the kernel on s390x. Fix by keeping BTF id in bpf_insn.imm for BPF_PSEUDO_KFUNC_CALLs, and storing the absolute address in bpf_kfunc_desc. Introduce bpf_jit_supports_far_kfunc_call() in order to limit this new behavior to the s390x JIT. Otherwise other JITs need to be modified, which is not desired. Introduce bpf_get_kfunc_addr() instead of exposing both find_kfunc_desc() and struct bpf_kfunc_desc. In addition to sorting kfuncs by imm, also sort them by offset, in order to handle conflicting imms from different modules. Do this on all architectures in order to simplify code. Factor out resolving specialized kfuncs (XPD and dynptr) from fixup_kfunc_call(). This was required in the first place, because fixup_kfunc_call() uses find_kfunc_desc(), which returns a const pointer, so it's not possible to modify kfunc addr without stripping const, which is not nice. It also removes repetition of code like: if (bpf_jit_supports_far_kfunc_call()) desc->addr = func; else insn->imm = BPF_CALL_IMM(func); and separates kfunc_desc_tab fixups from kfunc_call fixups. Suggested-by: Jiri Olsa Signed-off-by: Ilya Leoshkevich Acked-by: Jiri Olsa Link: https://lore.kernel.org/r/20230412230632.885985-1-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov

bpf: Add log_true_size output field to return necessary log buffer size

2023-04-11T16:05:43+00:00

Add output-only log_true_size and btf_log_true_size field to BPF_PROG_LOAD and BPF_BTF_LOAD commands, respectively. It will return the size of log buffer necessary to fit in all the log contents at specified log_level. This is very useful for BPF loader libraries like libbpf to be able to size log buffer correctly, but could be used by users directly, if necessary, as well. This patch plumbs all this through the code, taking into account actual bpf_attr size provided by user to determine if these new fields are expected by users. And if they are, set them from kernel on return. We refactory btf_parse() function to accommodate this, moving attr and uattr handling inside it. The rest is very straightforward code, which is split from the logging accounting changes in the previous patch to make it simpler to review logic vs UAPI changes. Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Acked-by: Lorenz Bauer Link: https://lore.kernel.org/bpf/20230406234205.323208-13-andrii@kernel.org

bpf: Refactor btf_nested_type_is_trusted().

2023-04-04T23:57:14+00:00

btf_nested_type_is_trusted() tries to find a struct member at corresponding offset. It works for flat structures and falls apart in more complex structs with nested structs. The offset->member search is already performed by btf_struct_walk() including nested structs. Reuse this work and pass {field name, field btf id} into btf_nested_type_is_trusted() instead of offset to make BTF_TYPE_SAFE*() logic more robust. Signed-off-by: Alexei Starovoitov Signed-off-by: Andrii Nakryiko Acked-by: David Vernet Link: https://lore.kernel.org/bpf/20230404045029.82870-4-alexei.starovoitov@gmail.com

bpf: Remove unused arguments from btf_struct_access().

2023-04-04T23:57:10+00:00

Remove unused arguments from btf_struct_access() callback. Signed-off-by: Alexei Starovoitov Signed-off-by: Andrii Nakryiko Acked-by: David Vernet Link: https://lore.kernel.org/bpf/20230404045029.82870-3-alexei.starovoitov@gmail.com

bpf: Update the struct_ops of a bpf_link.

2023-03-23T05:53:02+00:00

By improving the BPF_LINK_UPDATE command of bpf(), it should allow you to conveniently switch between different struct_ops on a single bpf_link. This would enable smoother transitions from one struct_ops to another. The struct_ops maps passing along with BPF_LINK_UPDATE should have the BPF_F_LINK flag. Signed-off-by: Kui-Feng Lee Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20230323032405.3735486-6-kuifeng@meta.com Signed-off-by: Martin KaFai Lau