kernel/linux.git/include/keys, branch v6.6.132

integrity: PowerVM support for loading third party code signing keys

2023-08-17T20:12:35+00:00

On secure boot enabled PowerVM LPAR, third party code signing keys are needed during early boot to verify signed third party modules. These third party keys are stored in moduledb object in the Platform KeyStore (PKS). Load third party code signing keys onto .secondary_trusted_keys keyring. Signed-off-by: Nayna Jain Reviewed-and-tested-by: Mimi Zohar Reviewed-by: Jarkko Sakkinen Tested-by: Nageswara R Sastry Signed-off-by: Jarkko Sakkinen

KEYS: DigitalSignature link restriction

2023-08-17T20:12:20+00:00

Add a new link restriction. Restrict the addition of keys in a keyring based on the key having digitalSignature usage set. Additionally, verify the new certificate against the ones in the system keyrings. Add two additional functions to use the new restriction within either the builtin or secondary keyrings. [jarkko@kernel.org: Fix checkpatch.pl --strict issues] Signed-off-by: Eric Snowberg Reviewed-and-tested-by: Mimi Zohar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

KEYS: Add forward declaration in asymmetric-parser.h

2023-06-23T08:15:37+00:00

Add forward declaration for struct key_preparsed_payload so that this header file is self-contained. Signed-off-by: Herbert Xu

certs: Move load_certificate_list() to be with the asymmetric keys code

2022-06-21T15:05:06+00:00

Move load_certificate_list(), which loads a series of binary X.509 certificates from a blob and inserts them as keys into a keyring, to be with the asymmetric keys code that it drives. This makes it easier to add FIPS selftest code in which we need to load up a private keyring for the tests to use. Signed-off-by: David Howells Reviewed-by: Simo Sorce Reviewed-by: Herbert Xu cc: keyrings@vger.kernel.org cc: linux-crypto@vger.kernel.org Link: https://lore.kernel.org/r/165515742145.1554877.13488098107542537203.stgit@warthog.procyon.org.uk/

KEYS: trusted: Introduce support for NXP CAAM-based trusted keys

2022-05-23T15:47:50+00:00

The Cryptographic Acceleration and Assurance Module (CAAM) is an IP core built into many newer i.MX and QorIQ SoCs by NXP. The CAAM does crypto acceleration, hardware number generation and has a blob mechanism for encapsulation/decapsulation of sensitive material. This blob mechanism depends on a device specific random 256-bit One Time Programmable Master Key that is fused in each SoC at manufacturing time. This key is unreadable and can only be used by the CAAM for AES encryption/decryption of user data. This makes it a suitable backend (source) for kernel trusted keys. Previous commits generalized trusted keys to support multiple backends and added an API to access the CAAM blob mechanism. Based on these, provide the necessary glue to use the CAAM for trusted keys. Reviewed-by: David Gstir Reviewed-by: Pankaj Gupta Reviewed-by: Jarkko Sakkinen Tested-by: Tim Harvey Tested-by: Matthias Schiffer Tested-by: Pankaj Gupta Tested-by: Michael Walle # on ls1028a (non-E and E) Tested-by: John Ernberg # iMX8QXP Signed-off-by: Ahmad Fatoum Signed-off-by: Jarkko Sakkinen

KEYS: trusted: allow use of kernel RNG for key material

2022-05-23T15:47:50+00:00

The two existing trusted key sources don't make use of the kernel RNG, but instead let the hardware doing the sealing/unsealing also generate the random key material. However, both users and future backends may want to place less trust into the quality of the trust source's random number generator and instead reuse the kernel entropy pool, which can be seeded from multiple entropy sources. Make this possible by adding a new trusted.rng parameter, that will force use of the kernel RNG. In its absence, it's up to the trust source to decide, which random numbers to use, maintaining the existing behavior. Suggested-by: Jarkko Sakkinen Acked-by: Sumit Garg Acked-by: Pankaj Gupta Reviewed-by: David Gstir Reviewed-by: Pankaj Gupta Reviewed-by: Jarkko Sakkinen Tested-by: Pankaj Gupta Tested-by: Michael Walle # on ls1028a (non-E and E) Tested-by: John Ernberg # iMX8QXP Signed-off-by: Ahmad Fatoum Signed-off-by: Jarkko Sakkinen

certs: Factor out the blacklist hash creation

2022-05-23T15:47:49+00:00

Factor out the blacklist hash creation with the get_raw_hash() helper. This also centralize the "tbs" and "bin" prefixes and make them private, which help to manage them consistently. Cc: David Howells Cc: David S. Miller Cc: David Woodhouse Cc: Eric Snowberg Cc: Herbert Xu Cc: Jarkko Sakkinen Signed-off-by: Mickaël Salaün Link: https://lore.kernel.org/r/20210712170313.884724-5-mic@digikod.net Signed-off-by: Jarkko Sakkinen

KEYS: Introduce link restriction for machine keys

2022-03-08T11:55:52+00:00

Introduce a new link restriction that includes the trusted builtin, secondary and machine keys. The restriction is based on the key to be added being vouched for by a key in any of these three keyrings. With the introduction of the machine keyring, the end-user may choose to trust Machine Owner Keys (MOK) within the kernel. If they have chosen to trust them, the .machine keyring will contain these keys. If not, the machine keyring will always be empty. Update the restriction check to allow the secondary trusted keyring to also trust machine keys. Allow the .machine keyring to be linked to the secondary_trusted_keys. After the link is created, keys contained in the .machine keyring will automatically be searched when searching secondary_trusted_keys. Suggested-by: Mimi Zohar Signed-off-by: Eric Snowberg Reviewed-by: Jarkko Sakkinen Tested-by: Mimi Zohar Signed-off-by: Jarkko Sakkinen

KEYS: store reference to machine keyring

2022-03-08T11:55:52+00:00

Expose the .machine keyring created in integrity code by adding a reference. Store a reference to the machine keyring in system keyring code. The system keyring code needs this to complete the keyring link to the machine keyring. Signed-off-by: Eric Snowberg Reviewed-by: Jarkko Sakkinen Tested-by: Mimi Zohar Signed-off-by: Jarkko Sakkinen

keys: X.509 public key issuer lookup without AKID

2022-01-08T22:18:42+00:00

There are non-root X.509 v3 certificates in use out there that contain no Authority Key Identifier extension (RFC5280 section 4.2.1.1). For trust verification purposes the kernel asymmetric key type keeps two struct asymmetric_key_id instances that the key can be looked up by, and another two to look up the key's issuer. The x509 public key type and the PKCS7 type generate them from the SKID and AKID extensions in the certificate. In effect current code has no way to look up the issuer certificate for verification without the AKID. To remedy this, add a third asymmetric_key_id blob to the arrays in both asymmetric_key_id's (for certficate subject) and in the public_keys_signature's auth_ids (for issuer lookup), using just raw subject and issuer DNs from the certificate. Adapt asymmetric_key_ids() and its callers to use the third ID for lookups when none of the other two are available. Attempt to keep the logic intact when they are, to minimise behaviour changes. Adapt the restrict functions' NULL-checks to include that ID too. Do not modify the lookup logic in pkcs7_verify.c, the AKID extensions are still required there. Internally use a new "dn:" prefix to the search specifier string generated for the key lookup in find_asymmetric_key(). This tells asymmetric_key_match_preparse to only match the data against the raw DN in the third ID and shouldn't conflict with search specifiers already in use. In effect implement what (2) in the struct asymmetric_key_id comment (include/keys/asymmetric-type.h) is probably talking about already, so do not modify that comment. It is also how "openssl verify" looks up issuer certificates without the AKID available. Lookups by the raw DN are unambiguous only provided that the CAs respect the condition in RFC5280 4.2.1.1 that the AKID may only be omitted if the CA uses a single signing key. The following is an example of two things that this change enables. A self-signed ceritficate is generated following the example from https://letsencrypt.org/docs/certificates-for-localhost/, and can be looked up by an identifier and verified against itself by linking to a restricted keyring -- both things not possible before due to the missing AKID extension: $ openssl req -x509 -out localhost.crt -outform DER -keyout localhost.key \ -newkey rsa:2048 -nodes -sha256 \ -subj '/CN=localhost' -extensions EXT -config <( \ echo -e "[dn]\nCN=localhost\n[req]\ndistinguished_name = dn\n[EXT]\n" \ "subjectAltName=DNS:localhost\nkeyUsage=digitalSignature\n" \ "extendedKeyUsage=serverAuth") $ keyring=`keyctl newring test @u` $ trusted=`keyctl padd asymmetric trusted $keyring < localhost.crt`; \ echo $trusted 39726322 $ keyctl search $keyring asymmetric dn:3112301006035504030c096c6f63616c686f7374 39726322 $ keyctl restrict_keyring $keyring asymmetric key_or_keyring:$trusted $ keyctl padd asymmetric verified $keyring < localhost.crt Signed-off-by: Andrew Zaborowski Reviewed-by: Jarkko Sakkinen Acked-by: Jarkko Sakkinen Acked-by: David Howells Signed-off-by: Jarkko Sakkinen