kernel/linux.git/include/dt-bindings/reset, branch v6.18.21

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2025-10-07T16:28:37+00:00

Pull clk updates from Stephen Boyd: "There's a bunch of patches here across drivers/clk/ to migrate drivers to use struct clk_ops::determine_rate() instead of the round_rate() one so that we can remove the round_rate clk_op entirely. Brian has taken up that task which nobody else has wanted to do for close to a decade. Thanks Brian! This is all prerequisite work to get to the real task of improving the clk rate setting process. Once we have determine_rate() used everywhere, we'll be able to do things like chain the rate request structs in linked lists to order the rate setting operations or add more parameters without having to change every clk driver in existence. It's also nice to not have multiple ways to do something which just causes confusion for clk driver authors. Overall I'm glad this is getting done. Beyond this change we also have a tweak to the clk_lookup() function in the core framework to use hashing on the clk name instead of a clk tree walk with string comparisons. We _still_ rely on the clk name to be unique, because historically we've used globally unique strings to describe the clk tree topology. This tree walk becomes increasingly slow as more clks are added to the system. Searching from the roots for a duplicate is simple but pretty dumb and it wastes boot time so we're using a hash table as an improvement. Ideally we wouldn't rely on the strings to be unique at all, relegating them to simply debug information, but that is future work that will likely require some sort of Kconfig knob indicating strings aren't used for topology description. Outside of the core framework changes we have the usual new SoC support and fixes to clk drivers for things that were discovered once the clks were used by consumer drivers. Nothing in particular is jumping out at me in the "misc" pile, except maybe the Amlogic driver that has gone through a refactoring. That series got a fix from testing in -next though so it seems likely that things have been getting good test coverage for a couple weeks already" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits) clk: microchip: core: remove duplicate roclk_determine_rate() reset: aspeed: register AST2700 reset auxiliary bus device dt-bindings: clock: ast2700: modify soc0/1 clock define clk: tegra: do not overallocate memory for bpmp clocks clk: ep93xx: Use int type to store negative error codes clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver clk: loongson2: Add clock definitions for Loongson-2K0300 SoC clk: loongson2: Avoid hardcoding firmware name of the reference clock clk: loongson2: Allow zero divisors for dividers clk: loongson2: Support scale clocks with an alternative mode clk: loongson2: Allow specifying clock flags for gate clock dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible clk: clocking-wizard: Fix output clock register offset for Versal platforms clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver() clk: mmp: pxa1908: Instantiate power driver through auxiliary bus clk: s2mps11: add support for S2MPG10 PMIC clock dt-bindings: clock: samsung,s2mps11: add s2mpg10 dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings clk: stm32: introduce clocks for STM32MP21 platform dt-bindings: stm32: add STM32MP21 clocks and reset bindings ...

Merge branches 'clk-marvell', 'clk-xilinx', 'clk-mediatek' and 'clk-loongson' into clk-next

2025-10-06T18:00:22+00:00

- Add Mediatek MT8196 clk drivers * clk-marvell: clk: mmp: pxa1908: Instantiate power driver through auxiliary bus * clk-xilinx: clk: clocking-wizard: Fix output clock register offset for Versal platforms clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver() * clk-mediatek: (31 commits) clk: mediatek: Add MT8196 vencsys clock support clk: mediatek: Add MT8196 vdecsys clock support clk: mediatek: Add MT8196 ovl1 clock support clk: mediatek: Add MT8196 ovl0 clock support clk: mediatek: Add MT8196 disp-ao clock support clk: mediatek: Add MT8196 disp1 clock support clk: mediatek: Add MT8196 disp0 clock support clk: mediatek: Add MT8196 mfg clock support clk: mediatek: Add MT8196 mdpsys clock support clk: mediatek: Add MT8196 mcu clock support clk: mediatek: Add MT8196 I2C clock support clk: mediatek: Add MT8196 pextpsys clock support clk: mediatek: Add MT8196 ufssys clock support clk: mediatek: Add MT8196 peripheral clock support clk: mediatek: Add MT8196 vlpckgen clock support clk: mediatek: Add MT8196 topckgen2 clock support clk: mediatek: Add MT8196 topckgen clock support clk: mediatek: Add MT8196 apmixedsys clock support dt-bindings: clock: mediatek: Describe MT8196 clock controllers clk: mediatek: clk-mtk: Add MUX_DIV_GATE macro ... * clk-loongson: clk: loongson2: Add clock definitions for Loongson-2K0300 SoC clk: loongson2: Avoid hardcoding firmware name of the reference clock clk: loongson2: Allow zero divisors for dividers clk: loongson2: Support scale clocks with an alternative mode clk: loongson2: Allow specifying clock flags for gate clock dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible

Merge branches 'clk-microchip', 'clk-lookup' and 'clk-st' into clk-next

2025-10-06T18:00:12+00:00

- Speed up clk_core_lookup() by using a hashtable * clk-microchip: ARM: at91: remove default values for PMC_PLL_ACR clk: at91: add ACR in all PLL settings clk: at91: sam9x7: Add peripheral clock id for pmecc clk: at91: clk-master: Add check for divide by 3 clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register ARM: at91: pm: save and restore ACR during PLL disable/enable * clk-lookup: clk: Use hashtable for global clk lookups clk: Sort include statements * clk-st: dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings clk: stm32: introduce clocks for STM32MP21 platform dt-bindings: stm32: add STM32MP21 clocks and reset bindings

Merge branches 'clk-imx', 'clk-allwinner' and 'clk-ti' into clk-next

2025-10-06T17:56:54+00:00

* clk-imx: clk: imx95-blk-ctl: Save/restore registers when RPM routines are called clk: imx95-blk-ctl: Save platform data in imx95_blk_ctl structure * clk-allwinner: clk: sunxi-ng: add support for the A523/T527 MCU CCU clk: sunxi-ng: div: support power-of-two dividers clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock clk: sunxi-ng: sun6i-rtc: Add A523 specifics * clk-ti: clk: keystone: sci-clk: use devm_kmemdup_array() clk: ti: am33xx: keep WKUP_DEBUGSS_CLKCTRL enabled

Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-10-02T00:32:51+00:00

Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ...

Merge tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

2025-09-23T20:17:56+00:00

Allwinner Device Tree changes for 6.18 This tag contains two DT binding header changes that are shared with the clk tree. In this cycle we gained support for the MCU PRCM clock and reset controller on the A523/A527/T527 family of SoCs, the NPU which is a Vivante GC9000 IP block, and the NPU clock that was missing. The other PRCM clock controller gained default bus clock rate settings. These were not configured in the upstream U-boot bootloader, leading to them running at slower rates. The assigned rates are from the user manual. There is also a new board, the NetCube Systems Nagami SoM and two of its carrier boards. The A523 family development boards now have their internal RTC clocks configured correctly, so that the RTC does not drift wildly. The missing functions for the AXP717 on these boards are added. Missing reset GPIOs and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its LEDs described and usable. An overlay for the Orange Pi Zero interface (addon) board was added. This can be used with the Orange Pi Zero and Zero Plus 2. Default audio routing for these two boards (to be used with the addon) were added to complement the overlay. * tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: sun55i: Complete AXP717A sub-functions arm64: dts: allwinner: t527: orangepi-4a: hook up external 32k crystal arm64: dts: allwinner: t527: avaota-a1: hook up external 32k crystal arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal arm64: dts: sun55i: a523: Assign standard clock rates to PRCM bus clocks ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier ARM: dts: sunxi: add support for NetCube Systems Nagami SoM riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier board bindings ARM: dts: allwinner: Add Orange Pi Zero Interface Board overlay ARM: dts: allwinner: orangepi-zero-plus2: Add default audio routing ARM: dts: allwinner: orangepi-zero: Add default audio routing arm64: dts: allwinner: a523: Add NPU device node arm64: dts: allwinner: a523: Add MCU PRCM CCU node dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting arm64: dts: allwinner: a527: cubie-a5e: Add LEDs Link: https://lore.kernel.org/r/aMrtuZg8HlR--TAt@wens.tw Signed-off-by: Arnd Bergmann

dt-bindings: stm32: add STM32MP21 clocks and reset bindings

2025-09-21T17:31:55+00:00

Adds clock and reset binding entries for STM32MP21 SoC family. Signed-off-by: Nicolas Le Bayon Reviewed-by: Conor Dooley Signed-off-by: Gabriel Fernandez Signed-off-by: Stephen Boyd

dt-bindings: clock: mediatek: Describe MT8196 clock controllers

2025-09-21T16:35:59+00:00

Introduce binding documentation for system clocks, functional clocks, and PEXTP0/1 and UFS reset controllers on MediaTek MT8196. This binding also includes a handle to the hardware voter, a fixed-function MCU designed to aggregate votes from the application processor and other remote processors to manage clocks and power domains. The HWV on MT8196/MT6991 is incomplete and requires software to manually enable power supplies, parent clocks, and FENC, as well as write to both the HWV MMIO and the controller registers. Because of these constraints, the HWV cannot be modeled using generic clock, power domain, or interconnect APIs. Instead, a custom phandle is exceptionally used to provide direct, syscon-like register access to drivers. Reviewed-by: Nícolas F. R. A. Prado Co-developed-by: AngeloGioacchino Del Regno Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Krzysztof Kozlowski Signed-off-by: Laura Nao Signed-off-by: Stephen Boyd

dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller

2025-09-13T05:49:09+00:00

There are four clock controllers in the A523 SoC. The existing binding already covers two of them that are critical for basic operation. The remaining ones are the MCU clock controller and CPU PLL clock controller. Add a description for the MCU CCU. This unit controls and provides clocks to the MCU (RISC-V) subsystem and peripherals meant to operate under low power conditions. Reviewed-by: Rob Herring (Arm) Link: https://patch.msgid.link/20250911174710.3149589-3-wens@kernel.org Signed-off-by: Chen-Yu Tsai

dt-bindings: reset: Add Tegra114 CAR header

2025-09-11T16:28:35+00:00

The way that resets are handled on these Tegra devices is that there is a set of peripheral clocks & resets which are paired up. This is because they are laid out in banks within the CAR (clock and reset) controller. In most cases we're referring to those resets, so you'll often see a clock ID used in conjection with the same reset ID for a given IP block. In addition to those peripheral resets, there are a number of extra resets that don't have a corresponding clock and which are exposed in registers outside of the peripheral banks, but still part of the CAR. To support those "special" registers, the TEGRA*_RESET() is used to denote resets outside of the regular peripheral resets. Essentially it defines the offset within the CAR at which special resets start. In the above case, Tegra114 has 5 banks with 32 peripheral resets each. The first special reset, TEGRA114_RESET(0), therefore gets ID 5 * 32 + 0 = 160. Signed-off-by: Svyatoslav Ryhel Reviewed-by: Mikko Perttunen Acked-by: Krzysztof Kozlowski Signed-off-by: Thierry Reding