kernel/linux.git/include/dt-bindings/reset, branch linux-6.9.y

Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2024-03-19T18:57:26+00:00

Pull more ARM SoC updates from Arnd Bergmann: "These are changes that for some reason ended up not making it into the first four branches but that should still make it into 6.9: - A rework of the omap clock support that touches both drivers and device tree files - The reset controller branch changes that had a dependency on late bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the drivers branch - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree changes that got delayed and needed some extra time in linux-next for wider testing" * tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: fsl: dpio: fix kcalloc() argument order bus: ts-nbus: Improve error reporting bus: ts-nbus: Convert to atomic pwm API riscv: dts: starfive: jh7110: Add camera subsystem nodes ARM: bcm: stop selecing CONFIG_TICK_ONESHOT ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift clk: ti: Improve clksel clock bit parsing for reg property clk: ti: Handle possible address in the node name dt-bindings: pwm: opencores: Add compatible for StarFive JH8100 dt-bindings: riscv: cpus: reg matches hart ID reset: Instantiate reset GPIO controller for shared reset-gpios reset: gpio: Add GPIO-based reset controller cpufreq: do not open-code of_phandle_args_equal() of: Add of_phandle_args_equal() helper reset: simple: add support for Sophgo SG2042 dt-bindings: reset: sophgo: support SG2042 riscv: dts: microchip: add specific compatible for mpfs pdma riscv: dts: microchip: add missing CAN bus clocks ARM: brcmstb: Add debug UART entry for 74165 ...

Merge branches 'clk-remove', 'clk-amlogic', 'clk-qcom', 'clk-parent' and 'clk-microchip' into clk-next

2024-03-13T19:34:10+00:00

* clk-remove: clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void * clk-amlogic: clk: meson: Add missing clocks to axg_clk_regmaps * clk-qcom: (62 commits) clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller clk: qcom: drop the SC7180 Modem subsystem clock driver clk: qcom: Use qcom_branch_set_clk_en() clk: qcom: branch: Add a helper for setting the enable bit clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks clk: qcom: gcc-msm8953: add more resets clk: qcom: videocc-*: switch to module_platform_driver ... * clk-parent: clk: Fix clk_core_get NULL dereference * clk-microchip: clk: microchip: mpfs: convert MSSPLL outputs to clk_divider clk: microchip: mpfs: add missing MSSPLL outputs clk: microchip: mpfs: setup for using other mss pll outputs clk: microchip: mpfs: split MSSPLL in two dt-bindings: can: mpfs: add missing required clock dt-bindings: clock: mpfs: add more MSSPLL output definitions

dt-bindings: reset: mediatek: add MT7988 infracfg reset IDs

2024-02-22T05:03:17+00:00

Add reset constants for using as index in driver and dts. Value is starting again from 0 because resets are used in another device than existing constants. Signed-off-by: Frank Wunderlich Reviewed-by: AngeloGioacchino Del Regno Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240201182409.39878-2-linux@fw-web.de Signed-off-by: Stephen Boyd

dt-bindings: reset: sophgo: support SG2042

2024-02-21T10:51:39+00:00

Add bindings for the reset generator on the SOPHGO SG2042 RISC-V SoC. Signed-off-by: Chen Wang Reviewed-by: Krzysztof Kozlowski Reviewed-by: Inochi Amaoto Link: https://lore.kernel.org/r/35c348437b6e18972ccaf90d9c38040caccd1f11.1706577450.git.unicorn_wang@outlook.com Signed-off-by: Philipp Zabel

dt-bindings: clock: qcom: Document the X1E80100 GPU Clock Controller

2024-02-06T17:11:09+00:00

Add bindings documentation for the X1E80100 Graphics Clock Controller. Signed-off-by: Rajendra Nayak Reviewed-by: Krzysztof Kozlowski Signed-off-by: Abel Vesa Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-3-7fb08c861c7c@linaro.org Signed-off-by: Bjorn Andersson

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2024-01-12T21:42:35+00:00

Pull clk updates from Stephen Boyd: "Only a couple new SoCs have support added this time, primarily for Qualcomm SM8650 based on the diffstat. Otherwise this is a collection of non-critical fixes and cleanups to various clk drivers and their DT bindings. Nothing is changed in the core clk framework this time, although there's a patch to fix a basic clk type initialization function. In general, this pile looks to be on the smaller side. New Drivers: - Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650 - Mediatek MT7988 SoC clocks Updates: - Update Zynqmp driver for Versal NET platforms - Add clk driver for Versal clocking wizard IP - Support for stm32mp25 clks - Add glitch free PLL setting support to si5351 clk driver - Add DSI clocks on Amlogic g12/sm1 - Add CSI and ISP clocks on Amlogic g12/sm1 - Document bindings for i.MX93 ANATOP clock driver - Free clk_node in i.MX SCU driver for resource with different owner - Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15 - Fix the name of the fvco in i.MX pll14xx by renaming it to fout - Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC - Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S - Check reset monitor registers on Renesas RZ/G2L-alike SoCs - Reuse reset functionality in the Renesas RZ/G2L clock driver - Global and RPMh clock support for the Qualcomm X1E80100 SoC - Support for the Stromer APCS PLL found in Qualcomm IPQ5018 - Add a new type of branch clock, with support for controlling separate memory control bits, to the Qualcomm clk driver - Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and QRU1000 - Add a number of missing clocks related to CSI2 on Qualcomm MSM8939 - Add support for the camera clock controller on Qualcomm SC8280XP - Correct PLL configuration in GPU and video clock controllers for Qualcomm SM8150 - Add runtime PM support and a few missing resets to Qualcomm SM8150 video clock controller - Fix configuration of various GCC GDSCs on Qualcomm SM8550 - Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver - Fix up GPU and display clock controllers PLL configuration settings on Qualcomm SM8550 - Cleanup variable init in Allwinner nkm module - Convert various DT bindings to YAML - A few kernel-doc fixes for Samsung SoC clock controllers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits) clk: mediatek: add drivers for MT7988 SoC clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 dt-bindings: clock: mediatek: add clock controllers of MT7988 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs dt-bindings: clock: mediatek: add MT7988 clock IDs clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: clk-mux: Support custom parent indices for muxes dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx clk: starfive: Add flags argument to JH71X0__MUX macro clk: imx: pll14xx: change naming of fvco to fout clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu() clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config clk: qcom: dispcc-sm8550: Use the correct PLL configuration function clk: qcom: dispcc-sm8550: Update disp PLL settings clk: qcom: gpucc-sm8550: Update GPU PLL settings ...

Merge tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2024-01-11T19:31:46+00:00

Pull SoC driver updates from Arnd Bergmann: "A new drivers/cache/ subsystem is added to contain drivers for abstracting cache flush methods on riscv and potentially others, as this is needed for handling non-coherent DMA but several SoCs require nonstandard hardware methods for it. op-tee gains support for asynchronous notification with FF-A, as well as support for a system thread for executing in secure world. The tee, reset, bus, memory and scmi subsystems have a couple of minor updates. Platform specific soc driver changes include: - Samsung Exynos gains driver support for Google GS101 (Tensor G1) across multiple subsystems - Qualcomm Snapdragon gains support for SM8650 and X1E along with added features for some other SoCs - Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195, and driver support for MT8188 along with some code refactoring. - Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream - Apple M1 mailbox driver is rewritten into a SoC driver - minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon" * tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits) memory: ti-emif-pm: Convert to platform remove callback returning void memory: ti-aemif: Convert to platform remove callback returning void memory: tegra210-emc: Convert to platform remove callback returning void memory: tegra186-emc: Convert to platform remove callback returning void memory: stm32-fmc2-ebi: Convert to platform remove callback returning void memory: exynos5422-dmc: Convert to platform remove callback returning void memory: renesas-rpc-if: Convert to platform remove callback returning void memory: omap-gpmc: Convert to platform remove callback returning void memory: mtk-smi: Convert to platform remove callback returning void memory: jz4780-nemc: Convert to platform remove callback returning void memory: fsl_ifc: Convert to platform remove callback returning void memory: fsl-corenet-cf: Convert to platform remove callback returning void memory: emif: Convert to platform remove callback returning void memory: brcmstb_memc: Convert to platform remove callback returning void memory: brcmstb_dpfe: Convert to platform remove callback returning void soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset firmware: qcom: qseecom: fix memory leaks in error paths dt-bindings: clock: google,gs101: rename CMU_TOP gate defines soc: qcom: llcc: Fix typo in kernel-doc dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel ...

Merge branches 'clk-zynq', 'clk-xilinx' and 'clk-stm' into clk-next

2024-01-09T19:55:06+00:00

- Update Zynqmp driver for Versal NET platforms - Add clk driver for Versal clocking wizard IP * clk-zynq: drivers: clk: zynqmp: update divider round rate logic drivers: clk: zynqmp: calculate closest mux rate * clk-xilinx: clocking-wizard: Add support for versal clocking wizard dt-bindings: clock: xilinx: add versal compatible * clk-stm: dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform clk: stm32mp1: use stm32mp13 reset driver clk: stm32mp1: move stm32mp1 clock driver into stm32 directory

Merge branches 'clk-imx', 'clk-qcom', 'clk-amlogic' and 'clk-mediatek' into clk-next

2024-01-09T19:52:49+00:00

* clk-imx: clk: imx: pll14xx: change naming of fvco to fout clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu() dt-bindings: clock: support i.MX93 ANATOP clock module * clk-qcom: (41 commits) clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config clk: qcom: dispcc-sm8550: Use the correct PLL configuration function clk: qcom: dispcc-sm8550: Update disp PLL settings clk: qcom: gpucc-sm8550: Update GPU PLL settings clk: qcom: gcc-sm8550: Mark RCGs shared where applicable clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votable clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag clk: qcom: camcc-sc8280xp: Prevent error pointer dereference clk: qcom: videocc-sm8150: Add runtime PM support clk: qcom: videocc-sm8150: Add missing PLL config property clk: qcom: videocc-sm8150: Update the videocc resets dt-bindings: clock: Update the videocc resets for sm8150 clk: qcom: rpmh: Add support for X1E80100 rpmh clocks clk: qcom: Add Global Clock controller (GCC) driver for X1E80100 dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100 dt-bindings: clock: qcom: Add X1E80100 GCC clocks clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000 clk: qcom: branch: Add mem ops support for branch2 clocks ... * clk-amlogic: clk: meson: g12a: add CSI & ISP gates clocks clk: meson: g12a: add MIPI ISP clocks dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids * clk-mediatek: clk: mediatek: add drivers for MT7988 SoC clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 dt-bindings: clock: mediatek: add clock controllers of MT7988 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs dt-bindings: clock: mediatek: add MT7988 clock IDs clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: clk-mux: Support custom parent indices for muxes dt-bindings: clock: brcm,kona-ccu: convert to YAML dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema dt-bindings: Remove alt_ref from versal

dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs

2024-01-03T23:55:15+00:00

Add reset ID for ethwarp subsystem allowing to reset the built-in Ethernet switch of the MediaTek MT7988 SoC. Signed-off-by: Daniel Golle Reviewed-by: AngeloGioacchino Del Regno Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/0c14bbacf471683af67ffa7572bfa1d5c45a0b5d.1702849494.git.daniel@makrotopia.org Signed-off-by: Stephen Boyd