kernel/linux.git/include/dt-bindings/net, branch v6.6.132

dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter

2022-06-29T14:08:06+00:00

This MII converter can be found on the RZ/N1 processor family. The MII converter ports are declared as subnodes which are then referenced by users of the PCS driver such as the switch. Signed-off-by: Clément Léger Reviewed-by: Florian Fainelli Reviewed-by: Rob Herring Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220624144001.95518-5-clement.leger@bootlin.com Signed-off-by: Geert Uytterhoeven

dt-bindings: net: dp83869: Add TI dp83869 phy

2019-11-15T01:42:43+00:00

Add dt bindings for the TI dp83869 Gigabit ethernet phy device. Signed-off-by: Dan Murphy CC: Rob Herring Signed-off-by: David S. Miller

dt-bindings: net: phy: Add support for AT803X

2019-11-07T05:42:06+00:00

Document the Atheros AR803x PHY bindings. Signed-off-by: Michael Walle Reviewed-by: Florian Fainelli Reviewed-by: Rob Herring Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-07T18:00:14+00:00

Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

2019-05-30T18:26:41+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Kate Stewart Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman

dt-bindings: phy: dp83867: Add documentation for disabling clock output

2019-05-23T00:40:17+00:00

The clock output is generally only used for testing and development and not used to daisy-chain PHYs. It's just a source of RF noise afterward. Add a mux value for "off". I've added it as another enumeration to the output property. In the actual PHY, the mux and the output enable are independently controllable. However, it doesn't seem useful to be able to describe the mux setting when the output is disabled. Document that PHY's default setting will be left as is if the property is omitted. Cc: Rob Herring Cc: Mark Rutland Signed-off-by: Trent Piepho Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

dt-bindings: net: vsc8531: add two additional LED modes for VSC8584

2018-10-08T17:31:27+00:00

The VSC8584 (and most likely other PHYs in the same generation) has two additional LED modes that can be picked, so let's add them. Reviewed-by: Rob Herring Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: Quentin Schulz Signed-off-by: David S. Miller

lan78xx: Read LED states from Device Tree

2018-04-20T15:39:09+00:00

Add support for DT property "microchip,led-modes", a vector of zero to four cells (u32s) in the range 0-15, each of which sets the mode for one of the LEDs. Some possible values are: 0=link/activity 1=link1000/activity 2=link100/activity 3=link10/activity 4=link100/1000/activity 5=link10/1000/activity 6=link10/100/activity 14=off 15=on These values are given symbolic constants in a dt-bindings header. Also use the presence of the DT property to indicate that the LEDs should be enabled - necessary in the event that no valid OTP or EEPROM is available. Signed-off-by: Phil Elwell Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: dp83867: Add binding for the CLK_OUT pin muxing option

2018-02-14T20:33:43+00:00

The DP83867 has a muxing option for the CLK_OUT pin. It is possible to set CLK_OUT for different channels. Create a binding to select a specific clock for CLK_OUT pin. Signed-off-by: Wadim Egorov Signed-off-by: Daniel Schultz Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: Add LED mode driver for Microsemi PHYs.

2017-02-08T18:29:04+00:00

LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Signed-off-by: Raju Lakkaraju Signed-off-by: David S. Miller